• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.81-88
• /
• 2022

In the NRC (New paradigm Reinforced Concrete) beam, steel forms, main angles used as main reinforcements, and shear angles used as basic shear reinforcements are welded and assembled in the form of vierendeel truss structures in a steel factory. After the NRC truss frame is installed at the site, additional main reinforcement and shear reinforcement are distributed. In this study, the shear performance evaluation of the NRC beam was conducted through shear tests in accordance with the type of shear reinforcement of the NRC beam (shear angle, inclined shear reinforcing bar, and U-type cover bar). As a result of the test, the initial stiffness was similar before the initial cracking of each specimen, and all specimens were shear fractured.The shear reinforcements of the specimens exhibited a yielding behavior at the time of the maximum sheat force, and the shear strengths of the specimens increased as the amount of reinforcement of the shear reinforcement increased. These results show that NRC shear reinforcements exhibit shear performance corresponding to their shear strength contribution. As a result of calculating the nominal shear strengths according to KDS 14 20 22, the experimental shear strengths of the NRC beam specimens with shear reinforcement was 37~146% larger than the nominal shear strengths, so It was evaluated as a safety side.

• Tunnel and Underground Space
• /
• v.32 no.1
• /
• pp.78-92
• /
• 2022

In this study, we proposed a diagnostics and assessment model for mining sites that can evaluate the smart mining technology level in a systematic and structured way. For this, the maturity of the smart mining was defined, and detailed assessment items of the diagnostics and assessment model for smart mining were derived by considering the smart factory diagnostics and assessment model (KS X 9001-3) used in the manufacturing industry. While maintaining the existing system, the existing 46 detailed assessment items were modified to be suitable for mining. As a result, a total of 29 detailed assessment items were derived in the areas of promotion strategy, process, information system and automation, and performance. Based on this, a questionnaire was designed to diagnose the level of smart mining technology, and assessment was performed by applying it to domestic iron mines. The level of smart mining technology in the study area was found to be level 2, and it could be inferred that it was about 40% lower than the average smart level of the general manufacturing industry. In addition, by using the developed model, it was possible to recognize the weak points of the mine at each stage of the introduction, operation, and advancement of smart mining, and to suggest investment and improvement directions.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.435-444
• /
• 2022

There are three focuses in the paper. Firstly, the study identified what channels were most viewed by YouTube users to watch the 'Daejang-dong scandal,' which was the most powerful agenda to influence the candidate preference among voters during the 20th presidential election. Secondly, the study analyzed whether the political tone of the first videos was in line with that of the subsequent videos. Finally, we compared the sentiment of comments on the first and subsequent videos. The results showed that TBS 'News Factory' and 'TV Chosun News' represented liberal and conservative factions, respectively. Secondly, the political tone of channels that were viewed subsequently was neutral, but the conservative channel users left more negative comments and that was significant statistically. In addition, about 80% of the conservative and liberal channel users shared the same political tendency with the channel they watched first, and more than 90% of the comments left at the subsequent videos in line with that of at the first news. Based on these results, the study concluded that the voters tended to seek political news that was similar with their political ideology, and it was considered a sort of echo chamber phenomenon on the YouTube. The study suggests that the performance of high-quality journalism by traditional news outlet might contribute to decrease the negative influence of political contents on YouTube users.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.319-324
• /
• 2022

The objective of this study was to determine the proper night interruption of photoperiods and dark periods for accumulating bioactive compounds of Agastache rugosa without decreasing plant growth. Five-week-old seedlings were transplanted in a DFT system with white LEDs. A. rugosa was treated with night interruption time treatments of 18:1:2:3, 18:2:2:2, 18:3:2:1 (light:dark:light:dark), and 20:4 (control) for 4 weeks. There were no significant differences except for leaf length, leaf width, and the number of flowers. The content of antioxidants in the shoot of A. rugosa was high in tilianin and acacetin, and the content of rosmarinic acid (RA) was significantly higher in the underground part. The RA content per dry weight of A. rugosa was 47.92 and 51.46% higher than that of the control in 18:1:2:3 and 18:2:2:2, and tilianin and acactin per dry weight were significantly higher in 18:3:2:1. There was no significant difference in growth due to the same day light integral, but 18:2:2:2 showed high total polyphenol contents. Therefore, it is thought that the effect of increasing secondary metabolites of A. rugosa without degradation of growth can be expected through night interruption treatment in plant factory cultivation systems using artificial light.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1245-1255
• /
• 2022

Terra Nova Bay polynya (TNBP) is a representative coastal polynya in East Antarctica, which is formed by strong katabatic winds. As the TNBP is one of the major sea ice factory in East Antarctica and has a great impact on regional ocean circulation and surrounding marine ecosystem, it is very important to analyze its area change and development characteristics. In this study, we detected the TNBP from synthetic aperture radar (SAR) and optical images obtained from April 2007 to April 2022 by visually analyzing the stripes caused by the Langmuir circulation effect and the boundary between the polynya and surrounding sea ice. Then, we analyzed the area change and development characteristics of the TNBP. The TNBP occurred frequently but in a small size during the Antarctic winter (April-July) when strong katabatic winds blow, whereas it developed in a large size in March and November when sea ice thickness is thin. The 12-hour mean wind speed before the satellite observations showed a correlation coefficient of 0.577 with the TNBP area. This represents that wind has a significant effect on the formation of TNBP, and that other environmental factors might also affect its development process. The direction of TNBP expansion was predominantly determined by the wind direction and was partially influenced by the local ocean current. The results of this study suggest that the influences of environmental factors related to wind, sea ice, ocean, and atmosphere should be analyzed in combination to identify the development characteristics of TNBP.

• Journal of Bio-Environment Control
• /
• v.31 no.2
• /
• pp.104-113
• /
• 2022

Plants under the genus Orostachys have been known as medicinal plants. This study deems to determine the growth and leaf color of Orostachys japonica and O. boehmeri when subjected to various LED light sources. A total of seven LED light treatments were used, i.e. red (630 nm), green (520 nm), blue (450 nm), purple (650 and 450 nm), 3000 K white (455, 600 nm), 4100 K white (455, 590 nm), and 6500 K white (450, 545 nm) LEDs. Results showed that O. japonica plants showed favorable growth under 4100 K white LED, while O. boehmeri plants had a positive growth response under white light LEDs (3000, 4100, and 6500 K). In leaf color analysis, the use of green LED showed the greatest change in CIELAB L^* and b^* values which were relatively higher compared to other treatments indicating that leaves turned yellowish. Further statistical analysis using Pearson's correlation also suggested that there is a small negative association between dry weight and b^* values of O. japonica, and a negative moderate association between plant weights (fresh and dry weight) and leaf color (L^* and b^*) and positive association between said plant weights and a^* color values of O. boehmeri. Therefore, it is recommended to cultivate O. japonica under 4100 K white LED and O. boehmeri under 3000, 4100, 6500 K white LEDs.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.11-21
• /
• 2022

Currently, in the domestic construction industry, the free web method has been emerging as a potential solution to the shortage of skilled workers due to the prolonged COVID-19 crisis, as it helps in securing economic feasibility through shortening the construction period and reducing labor costs. To consider one part of the construction method, in this study, the bending behavior according to the load was evaluated for the SY slope-type beam formwork, which was manufactured at a factory, assembled with rebar, brought into the site, and then poured into the site. For the SY Beam standard cross-sectional shape, a cross-sectional dimensional width of 400mm and depth 600mm determined through structural modeling using the MIDAS GEN program were applied. A total of 6 specimens were made with a member length of 5,000mm, 5 specimens and one RC specimen in the comparison group were manufactured in real-size format using the thickness of the steel plate(0.8, 1.0, 1.2mm) as a variable, and bending experiments were performed. In the bending test, the steel plate deck showed high initial stiffness and maximum strength as it yielded, which showed that it sufficiently contributed to the flexural strength. It is judged that additional analysis and experimental studies for 1.05, 1.1, and 1.15mm are needed to derive the appropriate steel plate thickness and the method for calculating the tensile force contribution of the steel plate to secure the manufacturing, construction and economic feasibility of SY Beam in the future.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.126-135
• /
• 2020

Recently, with the development of the 4th Industrial Revolution era and the popularization of technologies the maker movement is spreading worldwide in various ways for education, entrepreneurship, and solving social problems. This paper introduces a case of establishing and operating a maker space in Tanzania, East Africa, one of the developing countries. iTEC Tech-shop was established in the first half of 2018 at the Nelson Mandela African Institution of Science and Technology (NM-AIST) in Arusha, Tanzania by Innovative Technology and Energy Center (iTEC), and has been operating for nearly two years. With the allocation of empty warehouse space from NM-AIST, physical facilities were established through the purchase and installation of equipment and hand tools. Based on the advice from Idea Factory of Seoul National University and Fab-Lab Seoul, iTEC Tech-shop operational system were established. Through a total of 7 technical workshops, iTEC Tech-shop provided training courses for about 180 local personnel. In addition, the smart Techshop test-bed project was promoted in order to improve the operation level along with securing sustainability of the Techshop. The case of the iTEC Tech-shop could be a useful case for institutions or organizations promoting the maker movement to developing countries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.108-117
• /
• 2021

The educational approach using Capstone Design is gradually expanding with the change in social and educational paradigms. Course development utilizing the Capstone Design in models in the department of fashion can create a positive effect in that it enhances the practical capabilities of the fashion model and expands the perspective of various fields related to fashion shows. This study proved the educational efficacy by applying the Capstone Design to the model work presentation course and investigating the implications of the design from the instructor's perspective. The research methods used to guide this course utilizing the Capstone Design were theatrical research and model development research. This study showed that learners' satisfaction for this course combined with Capstone Design was very high, and students were very satisfied with the progress of the class. The instructor's point of view in progressing this course showed the need for education from an in-depth and convergence perspective related to fashion, improvement of temporal and spatial utilization of space, concerns about establishing connections with experts and various industries, and expanding the scope of education through continuous exchanges and cooperation with industry.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.49-54
• /
• 2023

The Global Positioning System (GPS) was developed for military purposes and developed as it is today by opening civilian signals (GPS L1 frequency C/A signals). The current satellite orbits the earth about twice a day to measure the position, and receives more than 3 satellite signals (initially, 4 to calculate even the time error). The three-dimensional position of the ground receiver is determined using the data from the radio wave departure time to the radio wave Time of Arrival(TOA) of the received satellite signal through trilateration. In the case of navigation using GPS in recent years, a location error of 5 to 10 m usually occurs, and quite a lot of areas, such as apartments, indoors, tunnels, factory areas, and mountainous areas, exist as blind spots or neutralized areas outside the error range of GPS. Therefore, in order to acquire one's own location information in an area where GPS satellite signal reception is impossible, another method should be proposed. In this study, IMU(Inertial Measurement Unit) combined with an acceleration and gyro sensor and a geomagnetic sensor were used to design a system to enable location recognition even in terrain where GPS signal reception is impossible. A method to track the current position by calculating the instantaneous velocity value using a 9-DOF IMU and a geomagnetic sensor was studied, and its feasibility was verified through production and experimentation.