• Korean Journal of Veterinary Research
• /
• v.41 no.4
• /
• pp.543-548
• /
• 2001

To examine the fate of the injected peritoneal mast cells (PMCs), we injected PMCs (500 or $10^5$) derived from WBB6F1-green fluorescent protein(GFP) mice into stomach wall of $WBB6F1-W/W^v$ mice. When 500 PMCs were injected, the proportion of alcian blue $(AB)^+$ mast cells to $GFP^+$ mast cells in the muscle was 25.0% on day 1, but decreased to 0.9% on day 7. Then, it increased to 98.2% on day 35. In contrast,$GFP^+$ mast cells in the mucosa were not detectable on day 1, 3, and 7 after injection. On day 35, the proportion of $AB^+$ mast cells to $GFP^+$ mast cells in the mucosa was 97.0%. When $10^5$ PMCs were injected, the proportion of $AB^+$ mast cells to $GFP^+$ mast cells in the muscle was more than 88.2%, and that in the mucosa was more than 86.3% from day 1 through 35 after injection. These results indicated that percentage of degranulation on day 1, 3, 7, 14 after injection of 500 PMCs was significantly higher than that after injection of $10^5$ PMCs. Futhermore, when 500 PMCs were injected, protease expression phenotypes of PMCs changed from day 14 after injection. When $10^5$ PMCs were injected, protease expression phenotype of PMCs did not change after injection. Such degranulated PMCs may acquire the new phenotype and adapt the new tissue.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.1
• /
• pp.55-66
• /
• 2022

In this study, forty corrugated fiberboard (CF) boxes for fresh produce were collected from farms located in Gyeongsan city and evaluated its characterizations and physical properties according to Korean Standard (KS). The basis weight, flute, and paperboard combination were determined for the characterizations of CF boxes. The measured basis weights of all samples were within the tolerance limit referred to KS and the flutes were B/F, EB/F, and AB/F flute, respectively. The bursting strength (BS), edgewise crush resistance (ECR), and compression strength (CS) were tested to evaluate the physical properties. There are four single-walled (SW) CF boxes showed BS and ECR higher than 638 kPa and 3.30 kN/m, respectively. One SW CF boxes showed BS and ECR higher than 785 kPa and 3.43 kN/m, respectively. In case of double-walled (DW) CF boxes, sixteen CF boxes showed BS and ECR higher than 785 kPa, 4.96 kN/m (AB flute), or 4.90 (EB flute), respectively. The other nineteen CF boxes showed BS and ECR higher than 981 kPa, 5.29 kN/m (AB flute), or 5.20 (EB flute), respectively. All the CF boxes except two samples showed the acceptable compression strength in reference to the guideline of KS.

• East Asian mathematical journal
• /
• v.30 no.5
• /
• pp.617-623
• /
• 2014

Due to Bell, a ring R is usually said to be IFP if ab = 0 implies aRb = 0 for $a,b{\in}R$. It is shown that if f(x)g(x) = 0 for $f(x)=a_0+a_1x$ and $g(x)=b_0+{\cdots}+b_nx^n$ in R[x], then $(f(x)R[x])^{2n+2}g(x)=0$. Motivated by this results, we study the structure of the IFP when proper ideals are taken in place of R, introducing the concept of insertion-of-ideal-factors-property (simply, IIFP) as a generalization of the IFP. A ring R will be called an IIFP ring if ab = 0 (for $a,b{\in}R$) implies aIb = 0 for some proper nonzero ideal I of R, where R is assumed to be non-simple. We in this note study the basic structure of IIFP rings.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.40-47
• /
• 2005

In order to develop a multi-microbial biofungicide against several important plant pathogenic fungi, strains were isolated from the phtophthora blight suppressive red-pepper field soil of Gyeongsangbuk-do, Korea. Strains AY1, AY6, AB1, BB2 and F4, which had strong antagonistic ability against Phytophthota capsici and Fusarium oxysporum, were selected for their involvement with strains of biocontrol fungicide. There were no antagonism among the selected strains and were compatible for making the biofungicide. Their antagonistic mechanisms, except for strain BB2, were an antibiosis by the production of antibiotic, while BB2 produced not only an antibiotic but also cellulase as an antagonistic mechanism against blight causing P. capsici. They were identified as Halobacterium sp. AB1, Xenorhadus sp. AY1, Bacillus sp. AY6, Bacillus sp. BB2, Zymomonas sp. F4 by various cultural, biochemical test and $Biolog^{TM}$ System 4.0. The highest levels of antifungal antibiotic could be produced after 48 hrs of incubation under the optimal medium which were 0.1% galactose, 0.1% $NaNO_2$, 5 mM $Na_2{\cdot}HPO_4$ (pH 5.5). The cultured multi-microbial biofungicide showed strong biocontrol activity against bacterial wilt disease and fusarium wilt disease in cucumber and tomato fields.

• Animal cells and systems
• /
• v.8 no.2
• /
• pp.117-123
• /
• 2004

The purpose of this study was to analyze inhibitory effects of anti-4-1BB monoclonal antibody on melanoma metastasis The 4-1BB (CD137) T cell molecule is a member of the TNF receptor family and its activation by either 4-1BB ligand or antibody induces T cell activation and growth. In the present study, administration of anti-4-1BB mAb induced inhibition of melanoma metastasis. Agonistic anti-4-1BB mAb induced not only CD$8^+$4-1BBT cells but also CD$8^+$IFN-${\gamma}$$^{+}$ T cell population. In the presence of anti-CD3 antibody, lymphocytes produced high levels of IFN-${\gamma}$ and low levels of IL-4 in anti-4-1BB mAb treated group. Exposure of melanoma cells to IFN-${\gamma}$ induced expression of MHC-I molecules. Thus, the increase in number of CD$8^+$T cells and enhanced MHC-I expression on B16F10 cells by augmented IFN-${\gamma}$ production in response to anti-4-1BB mAb may result in suppression of tumor growth and metastasis.s.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.238-247
• /
• 2004

Statement of problem: Major objective in making on implant-supported prosthesis is the production of superstructure that exhibits a passive fit when connected to multiple abutments. One requirement to ensure passive fit is to make an accurate impression. Purpose : The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on fxiture level (Group FIX-D), 2) indirect method on fixture level(Group FIX-I), 3) modified indirect method on fixture level(Group FIX-M), 4) direct method on abutment level(Group AB-D) and 5) indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^{(R)}$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results : The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2. In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error. Conclusion: An impression method have more effect on accuracy of master model than an impression level. A modified indirect method showed smallest vertical and horizontal error.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.63-72
• /
• 2006

Purpose: The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and Method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on future level (Group FIX-D), 2) Indirect method on fixture level(Group FIX-I), 3) Modified indirect method on fixture level(Group FD(-M), 4) Direct method on abutment level(Group AB-D) and 5) Indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^(R)$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results: The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2 In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error.

• Kyungpook Mathematical Journal
• /
• v.56 no.3
• /
• pp.819-829
• /
• 2016

In this paper, we study the order of growth of solutions to the non-homogeneous linear differential equation $$f^{(k)}+A_{k-1}e^{az}f^{(k-1)}+{\cdots}+A_1e^{az}f^{\prime}+A_0e^{az}f=F_1e^{az}+F_2e^{bz}$$, where $A_j(z)$ (${\not\equiv}0$) ($j=0,1,{\cdots},k-1$), $F_j(z)$ (${\not\equiv}0$) (j = 1, 2) are entire functions and a, b are complex numbers such that $ab(a-b){\neq}0$.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.174-179
• /
• 1987

The results of an ab initio (6-31G) molecular orbital calculations of the dipole moment derivatives and gas phase IR intensities in $CH_3F$ and $CF_4$ are reported. The results are compared with corresponding values obtained from a CNDO calculation. We have also analyzed the theoretical polar tensors into the charge, charge flux, and overlap contributions. The effective term charges of hydrogen atom appeared to be transferable among the fluoromethane molecules.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.9-22
• /
• 2000

Optical-optical double resonance experiments have been used to identify and characterize five ion-pair states and several of the bound and repulsive valence states of ClF. This report provides a description of these experiments for $^{35}CIF$ and $^{37}CIF$, and a summary of the current knowledge of the valence and ion-pair states. The important role of perturbations among the rovibronic levels of the bound valence states and their utilization in the double resonance technique is discussed. The ion-pair states of the same symmetry, ${\Omega}$=$0^+$ (E and f) and 1( $\beta$ and G) interact very strongly and the spectroscopy of these states is anomalous and, hence, interesting. Comparison is made to some recent ab initio calculations for ClF. One possible explanation of the irregular vibrational energy levels and rotational constants of the ion-pair states of $O^+$ and 1 symmetry is a crossing of the diabatic potentials of these states. Some currently unresolved questions about ClF spectroscopy are posed for future work. Where appropriate, analogy is made between the electronic states of ClF and the corresponding valence and ion-pair states of $Cl_2.$.