• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.304-310
• /
• 2005

Bulging of the lower eyelid & tear trough groove is regarded as a sign of aging. In the past, the surgical excision of the fat pad has been the mainstray of the management of lower palpebral bag in cosmetic blepharoplasty, Recently, fat pad sliding method has been introduced to make more attractive lower eyelids. We used the fat pad for covering the hollowness of the lower eye lid. And we use redundant fat pad for filling & augmentation of the lower eye lid by reflexion. Redraping of the orbicularis arc, with its accompanying midfacial fat repositioning, anatomically restores the cheek and lower lid to make more youthful contour. By redraping and fixing the orbicularis arc on the medial surface of the orbital rim, it becomes a more attractive midface and may prevent of ectropion. From August, 2002 to July, 2004 in correction of lower palpebral bulge & tear trough groove, these two technique were performed in 42 consecutive individuals (84 lower eyelid) for two-year period. Follow up ranged from 3 to 15 months. (an average of 9 months) Palpebral bulge & tear trough groove were corrected and obtained a youthful midface. Complication was rare. The advantages of these techniques are that: prevent in of secondary palpebral bulge and irregularity of lower eyelid by using of reflexed fat fad; prevent in of ectropion. Thus an attractive midface is obtained by redraping of orbicularis arc.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.4 s.10
• /
• pp.87-99
• /
• 2006

This research has the purpose to examine the images sought for, makeup Consciousness, and behavioral aspects during makeup by the college girls in their 20s in the region of Daeieon and Chungnam that have strong interest in appearance and start color makeup in full scale, who form the main consumer layers in cosmetics market, and to analyze their preference on colors and feelings by the kinds of cosmetics, and their cosmetics purchase behavior. A questionnaire survey on the college girls in Daejeon and Chungnam region has shown the following results. The biggest reason college girls do the makeup was for a refined and pure image as well as protection of skin and covering defects. Their greatest concern was skin protection, and as for color selection, harmonizations of skin color and hair color were the largest consideration. In addition, the type of makeup they do most was foundation makeup, while pink was the most frequent lipstick color, and lip glow was mostly normal colors. However, they mostly answered that they do not use eye shadow, eye runner, and foundation. It was shown that their cosmetics purchase p]aces were specialized discount stores for about 47% nearly half of them, and they consider colors the most for lipsticks and eye shadows, and affinity to skin for foundations and basic cosmetics.

• Archives of Craniofacial Surgery
• /
• v.9 no.2
• /
• pp.101-104
• /
• 2008

Purpose: Diplopia and cosmetically unacceptable enophthalmos are the major complications of blow out fracture. Prolapse of orbital tissue into the sinuses, enlarged orbital volume, atrophy of orbital fat and loss of support of orbital walls play a role in the pathogenesis of enophthalmos. To correct post-traumatic enophthalmos, freeing of incarcerated orbital contents combined with reduction of bony orbital volume and reconstruction of suspensory support of globe is necessary. But remained enophthalmos after surgical treatment is difficult to correct completely. In this case, the authors performed implant insertion for affected orbit and endoscopic orbital decompression for unaffected orbit for correction of late enophthalmos. Method: We reviewed a girl patient with right inferomedial orbital wall blow out fracture, right zygoma fracture treated at our hospital for correction of enophthalmos. An 18-year-old female had sustained posttraumatic enopthalmos. Two surgical management was performed for correction blow out fracture at the other hospital. But residual diplopia, enophthalmos, cheek drooping were found. And then she transferred to our hospital. She had severe enophthalmos(5 mm) also had diplopia and extraocular muscle limitation. We performed operation for correction of enophthalmos. After operation, she showed minimal improvement of diplopia and enophthalmos(3 mm). The authors make plan for operation for correction enophthalmos due to cosmetical improvement. Implant insertion was performed for affected orbit. For unaffected orbit, nasoendoscopic medial orbital wall decompression was proceeded. Result: Correction of enophthalmos was found after operation and was maintained for nine years follow-up. Patient expressed satisfaction for the result. Conclusion: To correct persistant enophthalmos, we could have satisfactory result with orbital wall reconstruction on affected eye and decompression on unaffected eye.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.1
• /
• pp.1-13
• /
• 2012

Over 3.8 billion years, through evolution nature came up with many effective continually improving solutions to its challenges. Humans have always been inspired by nature capabilities in problems solving and innovation. These efforts have been intensified in recent years where systematic studies are being made towards better understanding and applying more sophisticated capabilities in this field that is increasingly being titled biomimetics. The ultimate challenge to this field is the development of humanlike robots that talk, interpret speech, walk, as well as make eye-contact and facial expressions with some capabilities that are exceeding the original model from nature. This includes flight where there is no creature that is as large, can fly as high, carry so heavy weight, fly so fast, and able to operate in extreme conditions as the aircraft and other aerospace systems. However, there are many capabilities of biological systems that are not feasible to mimic using the available technology. In this paper, the state-of-the-art of some of the developed biomimetic capabilities, potentials and challenges will be reviewed.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.92-99
• /
• 2004

The formation degree of sustain (ITO pattern) decides quality of PDP (Plasma Display Panel). For this reason, it makes efforts in searching defects more than 30 un as 100%. Now, the existing inspection is dependent upon naked eye or microscope in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP 170 glass is based on line-scan mechanism. Developed system creates information that detects and sorts kinds of defect automatically. Designed inspection technology adopts multi-vision method by slip-beam formation for the minimum of inspection time and detection algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix that draws up an approach to geometry. A characteristic of defects, as pin hole, substance, protrusion, are extracted from blob analysis method. Defects, as open, short, spots and et al, are distinguished by line type inspection algorithm. In experiment, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2004

Due to the very fast switching speed of Josephson junctions, superconductive digital circuit has been a very good candidate fur future electronic devices. High-speed and Low-power microprocessor can be developed with Josephson junctions. As a part of an effort to develop superconductive microprocessor, we have designed an RSFQ 4-bit ALU (Arithmetic Logic Unit) in a pipelined structure. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in this work consisted of three DC current driven SFQ switches and a half-adder. We successfully tested the half adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached switches at the input ports to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this setup, 1-bit block of ALU was successfully tested up to 40 GHz. An RSFQ 4-bit ALU was fabricated and tested. The circuit worked at 5 GHz. The circuit size of the 4-bit ALU was 3 mm ${\times}$ 1.5 mm, fitting in a 5 mm ${\times}$ 5 mm chip.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.191-195
• /
• 2003

The formation degree of sustain (ITO pattern) decides quality of PDP (plasma display panel). For this reason. it makes efforts in search defects more than 30 ${\mu}{\textrm}{m}$. Now, the existing inspection process is dependent upon naked eye or SEM equipment in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP ITO glass. This system creates information that detects and sorts kind of defect automatically. Design ed inspection technology adopts line-scan method by slip-beam formation for the minimum of inspection time and image processing algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix which draws up an approach to geometry. A characteristic of area-shaped defects, as pin hole, substance, protrusion et al, are extracted from blob analysis method. Defects, as open, short, spots, et al, are distinguished by line type inspection algorithm. In experiment results, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.1-5
• /
• 2009

Purpose: The aim of this study is to grasp domestic eyewear trends in 2008 with analyzing brands, types, materials, colors and styles of new eyewear products. Methods: Examined all new eyewear products which were on three magazines related with eyewear published in Korea; "안경계", "Eye 11" and "THE AXIS". Results: There are 103 companies, 182 brands in 3 magazines related eyewear published in 2008. There are 77 domestic brands and 105 imported brands, and there are 522 eyeglasses and 126 sunglasses. Material of eyeglasses make up 37.93% of combination frames, 33.14% of metal frames and 28.93% of plastic frames and material of sunglasses make up 50.79% of plastic frames, 30.95% of combination frames and 18.25% of metal frames. From a style point of view, there are lots of retro and casual styles which one can express one's individuality with. In terms of colors, basic colors such as black and gray are mainstream and pastel tones and vivid tones are mainly used as the point color. Conclusions: The results of analyzing new eyewear products show that many light and feeling good products such as thin plate frames, TR frames and thin plate-TR combination frames were released in case of domestic eyewear products. In case of imports, there are lots of simple Ti frames and acetate frames which were variety patterns and colors.

• Journal of Industrial Convergence
• /
• v.18 no.3
• /
• pp.27-34
• /
• 2020

For modern people living in the era of the 4th Industrial Revolution, appearance management and consumption behavior are very important factors not only in personal values but also in human relationships. It is used as an important means of competitiveness with skin beauty and fashion. It is used as an important means. Therefore, we compared and analyzed professionally from the aesthetic point of view about the makeup of the eyebrows, eyes, eye line, cheeks, lip make-up, and skin tone of Woohee, who appeared in the movie and Miss Korea in 1989. As a result of the study, other aspects were analyzed in the common denominator of a somewhat exaggerated makeup technique. Accordingly, through this study, it is possible to explore multiple angles for developing novel makeup patterns and items, and at the same time, it will help to establish a foundation for makeup beauty education. In addition, this study intends to contribute to the practical development with competitiveness by building a more aggressive marketing strategy in the makeup market.

• Communications of Mathematical Education
• /
• v.32 no.3
• /
• pp.275-296
• /
• 2018

The purpose of this study is to investigate the change of gaze and the change of the proof learning achievement after learning the analytic method for proof to mathematical gifted students using eye tracking technique. In order to complete the purpose of this study, a mixed method research was used, that is a combination of quantitative and qualitative research methods. Quantitative analysis was conducted based on the data obtained through the eye tracker, and qualitative analysis was also done using post interview data to make up for the quantitative analysis. The subjects of this study were 8 mathematical gifted 3rd grade middle school students in the gifted education center. The conclusions of this study are as follows. First, the learning of analysis leads to a change of gaze in the proof learning of students. The students, after learning the analysis, moved their gaze from the bottom to the top when solving the proof problem, and the occupancy rate of the gaze to the bottom of the proof was higher than the higher part. Second, the change of gaze caused by the learning of the analysis have a correlation with the achievement of the proof learning and it can be seen that the method learning improves the achievement of the proof learning of the students.