• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1424-1428
• /
• 1999

This paper presents a mathematical decomposition coordination method to implementing the distributed optimal power flow (OPF), wherein a regional decomposition technique is adopted to parallelize the OPT. The proposed approach is based on the Alternating Direction Method (ADM), a variant of the conventional Augmented Lagrangian approach, and makes it possible the independent regional AC-OPF for each control area while the global optimum for the entire system is assured. This paper is an extension of our previous work based on the auxiliary problem principle (APP). The proposed approach in this paper is a completely new one, however, in that ADM is based on the Proximal Point Algorithm which has long been recognized as one of the attractive methods for convex programming and min-max-convex-concave programming. The proposed method was demonstrated with IEEE 50-Bus system.

• 융합정보논문지
• /
• 제11권8호
• /
• pp.1-7
• /
• 2021

본 논문에서는 병렬 인터페이스형 디지털/아날로그 변환회로에 외부 소자를 추가해 1개 비트를 확장하는 방법을 제시했다. 이를 위해 디지털/아날로그 변환회로의 원리를 살펴보고 개별 소자를 추가해 1개 비트를 확장하는 경우에 발생되는 문제점을 분석했으며, 연산증폭기 회로를 이용한 디지털/아날로그 소자의 비트 확장 방법을 제시했다. 제시한 방법은 연산증폭기의 고정밀도 특성을 이용함에 따라 소자에 오차가 발생하더라도 출력파형의 전체적인 크기에만 영향을 미치고 각 비트 사이에서 발생하는 전압역전 현상은 발생하지 않는 특징을 지닌다. 제시한 방법의 효과를 확인하기 위해 실험회로를 구성해 출력의 절대전압 측정과 상대적 오차 측정을 실시한 결과 0.0756%의 전압오차가 나타남으로서 개별소자 추가에 의해 1개 비트 확장 시 요건인 0.195%를 충분히 충족함을 확인했다.

• 시큐리티연구
• /
• 제16호
• /
• pp.161-187
• /
• 2008

본 연구는 세계적으로 확산되고 있는 테러리즘과 관련하여 경호임무 수행시 나타난 위해사례분석을 통하여 도출된 문제점들을 다각도에서 분석하여 현재 한국 경호제도의 발전방안을 제시하고자 하였다. 본 연구를 수행하기 위해 현재 한국의 경호관계법, 경호의 원칙과 방법론, 테러와 뉴테러리즘에 대한 기본 이론을 고찰하였다. 그리고 경호위해 사례 중 박근혜 위해사례를 중점적으로 분석한 질적사례연구로 연구를 수행하였다. 본 연구를 통한 한국 경호제도의 발전방안은 다음과 같다. 첫째, 법제도적인 측면에서는 테러방지법과 요인경호법 제정을 재검토해야 할 것이다. 그리고 민간경호의 근거법인 경비업법의 개정을 통해 민간경호의 발전을 도모해야 한다. 둘째, 민간경호 육성의 측면에서 세분화되지 않고 있는 교육훈련 프로그램을 정비 해야하고 강화해야 한다. 또 경비업법에 의한 신변보호업무를 활성화하고 시장을 확대해야 한다. 이러한 관점에서 민간경호원에 대한 국가자격증을 도입해야하고, 공경호의 대표적인 대통령실 경호처에서는 선진기술들을 민간경호로 이전해야할 것이다. 셋째, 운영적 측면에서는 SCE원칙, 인적방벽효과의 원리, 촉수거리확보의 원칙, 체위확장의 원칙, 일직선의 원칙, 대피우선의 원칙 등 경호원칙에 입각한 경호운영이 요구되는 바, 이러한 운영을 위해 선행적으로 예방경호의 중요성이 강조되며 철저한 경호경비기획이 이루어져야 할 것이다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.126-140
• /
• 2005

The tomographic gamma scanner (TGS) method, a further of extension of segmented gamma scanner (SGS), is most accurate and precise for assaying heterogeneous drummed nuclear radioactive waste; it is widely used in nuclear power plants and radioactive waste storages and disposal sites. The transmission and emission images are reconstructed by image reconstruction techniques. In the paper, the principle of TGS is introduced; image reconstruction techniques are discussed as well; finally, it is demonstrated that TGS method performance.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.273-277
• /
• 2002

This paper describes an optimal synthesis method of binary neural network(BNN) for an approximation problem of a circular region and synthetic image having four class using a newly proposed learning algorithm. Our object is to minimize the number of connections and neurons in hidden layer by using a Newly Expanded and Truncated Learning Algorithm(NETLA) based on the multilayer BNN. The synthesis method in the NETLA is based on the extension principle of Expanded and Truncated Learning (ETL) learning algorithm using the multilayer perceptron and is based on Expanded Sum of Product (ESP) as one of the boolean expression techniques. The number of the required neurons in hidden layer can be reduced and fasted for learning pattern recognition.. The superiority of this NETLA to other algorithms was proved by simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.652-657
• /
• 2008

A stress distribution of composite laminates patches is obtained by using the Kantorovich method when the substrate is under uniaxial load. The analysis is based on the stress function approach and uses the complementary virtual work principle. The three-dimensional stresses satisfy the traction free conditions at the free edges and the top surfaces of the patch. The stress of the bottom surfaces of the patch is obtained from equilibrium equation of patch and substrate. To demonstrate the efficiency and validity of the proposed analysis, numerical examples for cross-ply and quasi-isotropic laminates are included. The present method provides accurate stresses in the interior and near the free edges of composite laminate patches.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2057-2066
• /
• 2016

An extension of the one-cycle control (OCC) method for switched-capacitor (SC) converters is proposed in this paper, featuring a fast dynamic response, wide line and load operation ranges, and simplicity in implementation. To illustrate the operation principle of this nonlinear control method and to demonstrate its simplicity in design, a dual-phase unity gain SC converter is examined. A new control loop based on the charge balance in a flying capacitor is formulated for the OCC technique and implemented with a 15W dual-phase unity gain SC converter on a circuit board for control verification. The obtained experimental results show that external disturbances can be rejected in one switching cycle by the OCC controlled SC converter with good line and load regulations. When compared to other control methods, the proposed nonlinear control loop exhibits superior dynamic performance in suppressing input and load disturbances.

• 대한조선학회지
• /
• 제21권2호
• /
• pp.19-27
• /
• 1984

An extension of the finite element method to the stability analysis of shells of revolution under static axisymmetric loading is presented in this paper. A systematic procedure for the formulation of the problem is based upon the principle of virtual work. This procedure results in an eigenvalue problem. For solution, the shell of revolution is discretized into a series of conical frusta. The buckling mode in the circumferential direction is assumed, this assumption makes the problem economical for the computing time. The present method is applied to a number of shells of revolution, under axial compression or lateral pressure, and comparision are made with other theoretical results. The results show good agreement each other. The effects of aspect ratio, boundary conditions and buckling modes on the buckling strength of shells of revolution are studied. Also the optimum shape of cylindrical shell under uniform axial compression is obtained from the view point of structural stability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.383-386
• /
• 1993

In this paper, we propose a sensory data combination method by a fuzzy number approach for multisensor data fusion. Generally, the weighting of one sensory data with respect to another is derived from measures of the relative reliabilities of the two sensory modules. But the relative weight of two sensory data can be approximately determined through human experiences or insufficient experimental data without difficulty. We represent these relative weight using appropriate fuzzy numbers as well as sensory data itself. Using the relative weight, which is subjective valuation, and a fuzzy-numbered sensor data, the fuzzy weighted average method is used for a representative sensory data. The manipulation and calculation of fuzzy numbers can be carried out using the Zadeh's extension principle which can be approximately implemented by the $\alpha$-cut representation of fuzzy numbers and interval analysis.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.34-43
• /
• 2019

An improved half-bridge LLC converter with a magamp auxiliary post-regulator is proposed in this paper. The function of the magamp is bypassed when the converter works within the low input-voltage range. Meanwhile, it operates as an auxiliary post-regulator when the input voltage is high. By changing the blocking time of the magamp, the dc gain of the converter can be extended. Hence, the input voltage range of the converter is extended. The realization of proposed topology does not require a complicated circuit. The controller of the magamp can be easily implemented using only passive components, transistors and an OP amp. The generalized operational principle is analyzed and the design criterion for the magamp is presented. Finally, a 25V output, 400W experimental prototype was built and tested for a 160-300V input-voltage range to verify the feasibility of the proposed method.