• 한국의류학회지
• /
• 제46권3호
• /
• pp.530-544
• /
• 2022

Titanium exhibits substantial corrosion resistance, strength, and ductility, with a specific gravity of approximately 4.5 and a melting point of approximately 1800℃. It is currently used in aircraft parts and space development. This study considered the thermal characteristics, stealth effects of infrared thermal imaging cameras, electromagnetic shielding, and electrical conductivity of Ti-sputtered materials. Base materials of different densities and types were treated using titanium sputtering. Infrared thermal imaging showed a better stealth effect when the titanium layer was directed toward the outside. The film sample presented a better stealth effect than the fabrics did. In each of the samples subjected to titanium sputtering, when the titanium layer was directed outward, the untreated sample or exposed titanium layer showed surface temperatures lower than those of the samples with the titanium layer oriented toward the heat source. Additionally, after the titanium sputtering treatment, the films conducted electricity (low resistance) better than the fabrics did. All titanium-sputtered specimens presented reduced electromagnetic wave transmission and significantly reduced infrared transmission. These results are expected to apply to military uniforms (soldiers' protective clothing to gain the upper hand on the battlefield), medical sensors, multifunctional intelligent textiles and etc.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권1호
• /
• pp.30-36
• /
• 1995

지금까지 TV와 모니터에서 발생되는 유해한 전자파와 정전기에 대해서는 단순한 차폐방법으로만 대응해 왔다. 본 연구에서는 이와는 달리 생체에 유익한 특성을 역으로 제공하는 방법에 착상하여 생체에 유익한 것으로 알려진 원적외선이 방사되도록 특수세라믹스를 브라운관에서 적용하고 이를 이용하여 생체실험을 한 결과, 일반 TV와 모니터에서보다 국화는 약 1.5배, 초파리와 올챙이는 약 2배 향상된 생명력이 나타났다. 결과적으로 원적외선이 방사되는 특수처리한 브라운관이 생체유익효과를 제공한다는 사실이 입증되었다.

• 항공우주시스템공학회지
• /
• 제4권3호
• /
• pp.24-28
• /
• 2010

The purpose of this study is to define available microwave absorbing structure for aircraft from in the X-band(8.2~12.4GHz) frequencies. The electromagnetic wave absorption or shielding techniques is an important issue not only for military purpose but also for commercial purposes. Aircraft Radar Absorbing Structure(RAS) is absorbed or scattered propagation waves from the enemy radar. There are absorbing technologies at shaping design techniques and using Radar Absorbing Materials(RAM). RAM is more important because shaping design can't include perfect radar absorbing performance. In this study, based on material properties was introduced RAM and to analyze the each characteristics. Finally, we comparison appropriate RAM for aircraft.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.89-90
• /
• 2022

Arc metal spraying is a widely used method for improving the performance of construction structures such as corrosion resistance and electromagnetic wave shielding. However, when arc metal spraying is applied to a concrete structure, adhesion performance may deteriorate. Therefore, the effect of each surface treatment method on the physical properties between the arc metal spray coating and concrete was reviewed by evaluating the deposition efficiency and adhesion performance according to the arc metal spray surface treatment method (surface reinforcing agent, roughening agent, and sealing agent). As a result, it is suggested as an optimal surface treatment condition to induce non-interface failure by using a roughening agent and to improve the properties of concrete and metal coatings by applying a surface reinforcing agent and sealing agent.

• 한국정보통신학회논문지
• /
• 제21권12호
• /
• pp.2221-2231
• /
• 2017

본 논문에서는 원전용 계측 제어기기를 진단하고 유지 보수하기 위한 무선통신기술의 국내외 적용 사례, 프로토콜(Wi-Fi, Zigbee, Z-wave, WirelessHart 등) 및 그에 따른 전파특성을 조사하였다. 또한, 원전 내 무선통신기술 적용시 우려되는 전자파 간섭(EMI/RFI)과 관련하여 국내 규제지침 KINS/RG-N03.09(개정 2판)에서 승인한 RG. 1.180(Regulatory Guide 1.180 rev.1), MIL-STD 461E, 및 IEC 61000-4의 차이를 분석하였다. 추가적으로 기존의 EMC 관련 규제에 포함되어 있지 않았던, 실내 환경에서의 구조적 특징, 전파산란 및 차폐효과, 실내 감쇄모델을 고려한 전자파 영향성 평가요소에 대해서도 연구하였다.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.644-653
• /
• 2013

본 논문에서는 지하 다층 구조물로 경사 입사하는 고고도 전자기파의 투과 현상을 위한 전자기적 모델링 기법과 편파 및 임계각을 고려한 모델링 기법을 제안하였다. 고고도 전자기파의 전송 채널인 지하 다층 구조물은 측정된 복소 유전율을 바탕으로 지하 터널층으로 투과된 고고도 전자기파를 정량적으로 계산하였으며, 입사파의 편파와 임계각을 고려하여 투과 현상을 분석하여, 평행 편파를 갖는 고고도 전자기파가 수직 편파를 갖는 경우보다 더욱 큰 투과 현상이 발생함을 확인하였다. 또한, 수직 입사의 경우, 편파에 상관없이 약 5.6 kV/m의 전기장이 투과함을 확인하였으며, 지하 다층 구조물에서의 임계각인 38도 근처에서 매우 급격한 전기장의 감쇠를 확인하였다. 이를 바탕으로, 지하 다층 구조물을 구성하는 토양층의 수분 함유량 변화 및 각 층의 깊이에 따른 고고도 전자기파의 투과 현상을 정량적으로 분석하여, 지하 터널층의 방호 설계 시 물리적인 깊이에 대한 고려뿐만이 아닌 추가적인 방호 설계에 대한 고려가 불가피함을 소개하였다.

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.122-127
• /
• 2006

무전해 도금법을 이용하여 고분자섬유의 형태를 가진 전도성 필러를 제조하였다. 나일론 6과 레이온 섬유 분체에 니켈과 구리를 도금한 복합 전도성 필러를 제조하였다. 입도 분석기를 이용하여 필러의 입자크기분포를 측정하였으며, 전도성 필러의 전도성을 측정하기 위해 전도성 분석기를 이용하였으며, 본 연구의 전도성 필러와 유사한 용도로 사용되는 탄소섬유의 전도성을 측정하여 전도성의 차이점을 비교하였다. ABS 수지에 제조된 전도성 필러를 주입하여 필름을 만들어서 1MHz$\sim$1GHz 주파수 대역에서 전자파 차폐 특성을 측정하였다. 제조된 전도성 필러가 첨가된 필름의 전자기파 차폐 특성을 측정하기 위하여 ASTM(D4935-89) 규격의 플랜지형 동축전송선 측정기구를 사용하였다. 제조된 전도성 필러는 기존의 탄소계 필러에 비해 전도성이 커서 전자파 차폐용 재료로 적합하였다.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.728-732
• /
• 2010

GIS(Gas insulated switching gear) is power equipment with excellent dielectric strength and is economy merit in high confidence and stability. Recently, because equipment of GIS was occurring problem of confidence used for a long time, partial discharge on-line diagnosis systems have been importantly recognized. Partial discharge (PD) detection is an effective means for monitoring and evaluation of dielectric condition of gas insulated system (GIS). The ultra-high-frequency (UHF) PD detection technique can detect and locate the PD sources inside GIS by detecting electromagnetic wave emitted from PD source. Therefore, real-time diagnostic system using UHF detection method has been developed for this application is being expanded gradually. However, the signal of partial discharge occurring in SF6 gas is very weak and susceptible to external noises which mainly consist of PD in air. Thus, it is important to distinguish the PD in SF6 gas more sensitively from the external noises. Unfortunately, these external noise signals and the partial discharge signals have very similar characteristics. Therefore, to solve this problem, we need the signal processing method for distinguish partial discharge signals with external noise signals for improvement of SNR(signal to noise ratio) and sensitivity. In this paper, we proposed internal signal processing method for removing external noise signals with built-in pre.amplifier and frequency conversion circuit.

• 마이크로전자및패키징학회지
• /
• 제12권3호
• /
• pp.267-274
• /
• 2005

This paper presents the fabrication of surface acoustic wave (SAW)-based pressure sensor for long-term stable mechanical compression force measurement. SAW pressure sensor has many attractive features for practical pressure measurement: no battery requirement, wireless pressure detection especially at hazardous environments, and easy other functionality integrations such as temperature, humidity, and RFID. A $41^{\circ}$ YX $LiNbO_3$ piezoelectric substrate was used because of its high SAW propagation velocity and large values of electromechanical coupling factors $K^2$. A silicon substrate with $\~200{\mu}m$ deep cavity was bonded to the diaphragm with epoxy, in which gold was covered all over the inner cavity in order to confine electromagnetic energy inside the sensor, and provide good isolation of the device from its environment. The reflection coefficient $S_{11}$ was measured using network analyzer. High S/N ratio, sharp reflected peaks, and clear separation between the peaks were observed. As a mechanical compression force was applied to the diaphragm from top with extremely sharp object, the diaphragm was bended, resulting in the phase shifts of the reflected peaks. The phase shifts were modulated depending on the amount of applied mechanical compression force. The measured $S_{11}$ results showed a good agreement with simulated results obtained from equivalent admittance circuit modeling.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.729-735
• /
• 2021

Recently Artificial Intelligence(AI) has been developed and used in various fields. Especially AI recognition technology can perceive and distinguish images so it should plays a significant role in quality inspection process. For stability of autonomous driving technology, semiconductors inside automobiles must be protected from external electromagnetic wave(EM wave). As a shield film, a thin polymeric material with hole shaped micro-patterns created by a laser processing could be used for the protection. The shielding efficiency of the film can be increased by the hole structure with appropriate pitch and size. However, since the sensitivity of micro-machining for some parameters, the shape of every single hole can not be same, even it is possible to make defective patterns during process. And it is absolutely time consuming way to inspect all patterns by just using optical microscope. In this paper, we introduce a AI inspection system which is based on web site AI tool. And we evaluate the usefulness of AI model by calculate Area Under ROC curve(Receiver Operating Characteristics). The AI system can classify the micro-patterns into normal or abnormal ones displaying the text of the result on real-time images and save them as image files respectively. Furthermore, pressing the running button, the Hardware of robot arm with two Arduino motors move the film on the optical microscopy stage in order for raster scanning. So this AI system can inspect the entire micro-patterns of a film automatically. If our system could collect much more identified data, it is believed that this system should be a more precise and accurate process for the efficiency of the AI inspection. Also this one could be applied to image-based inspection process of other products.