• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.21-25
• /
• 2014

In order to develop 2nd generation (2G) high-temperature superconducting (HTS) wires as commercial products, it is necessary to perform a high speed investigation of their superconducting performance. Room-temperature and non-contact optical scanning tools are necessary to verify the microstructure of the superconducting materials, the current flow below the critical temperature, and the critical current density. In this paper, we report our results of an inspection of the electrical transport properties of coated conductors. The samples that we used in our study were highly qualified rare-earth based coated conductors produced via co-evaporation, and $SmBa_2Cu_3O_{7-y}$ (SmBCO) was the superconducting materials used in our studies. A film grown on IBAD-MgO templates shows larger than 400 A/cm at 77 K and a self-field. The local transport properties of the films were investigated by room-temperature imaging by thermal heating. The room-temperature images show structural inhomogeneities on the surface of the films. Bolometric response imaging via low-temperature bolometric microscopy was used to construct the local current mapping at the surface. These results indicate that the non-uniform regions on the surface disturb the current flow, and laser scanning images at room-temperature and at a low-temperature suggest a correlation between the structural properties and transport properties. Thus this method can be effective to evaluate the quality of the coated conductors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.639-640
• /
• 2006

We investigated fault current limitation characteristics of the resistive superconducting fault current limiter(SFCL) which consisted of a Bi-2212 bulk coil and a shunt coil. The Bi-2212 bulk coil and the shunt coil were connected in parallel. The Bi-2212 bulk coil was placed inside the shunt coil to induce field-assisted quench. The fault test was conducted at an input voltage of 200 $V_{rms}$ and fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$. The fault conditions were asymmetric and symmetric, and the fault period was 5 cycles. The test results show that the SFCL successfully limited the fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$ to below $5.5{\sim}6.9kA_{peak}$ within $0.64{\sim}2.17$ msec after the fault occurred. Limitation was faster under symmetric fault test condition due to the larger change rate of current. We concluded that the speed of fault current limitation was determined by the speed of current rise rather than the amplitude of a short circuit current. These results show that the Bi-2212 bulk coil is suitable for distribution-class SFCLs.

• 지구물리와물리탐사
• /
• 제1권2호
• /
• pp.110-115
• /
• 1998

전도성 황화광체의 탐사에는 현장작업의 편이성과 저렴한 조사 경비 및 성과의 신뢰성으로 자연전위탐사, VLF 전자탐사 및 전기비저항 쌍극자탐사법이 많이 사용되어 왔다. 금번 탐사는 전라북도 진안군 부귀면에 소재 하는 장금 광산의 맥상의 노두 광체를 대상으로 맥상 황화광체에 대한 물리탐사 탐사 반응을 검토하고 이를 시추탐사 결과와 대비, 고찰하여 보았다. 조사지역 부근의 지질은 유천층군의 퇴적 암류와 산성 화산암류로 구성되며 광상은 광염상 또는 맥상으로 황철석, 자류철석 및 방연석 등의 황화광물이 배태된다. 이들 맥상 광체에 의한 전형적인 이상대가 각각 포착되었는데, 자연전위탐사 결과 광체는 등전위선 분포가 조밀하고 전위 경도가 큰 쪽으로 경사지며, VLF 전자탐사 결과 광체의 부존 범위와 잘 일치되며 서쪽으로 경사지는 광체에 의한 반응임이 확인되었다. 쌍극자 전기비저항탐사 결과 역시 서쪽으로 경사지는 광체에 의한 반응이 확인되었다. 이에 대한 시추탐사 결과 광체는 주향 방향으로 약 50 m 연장되며 약 $70^{\circ}W$경사를 가진 맥상 광체임이 밝혀졌다.

• 한국산학기술학회논문지
• /
• 제10권5호
• /
• pp.935-941
• /
• 2009

본 논문에서는 철도의 운영효율을 향상시킬 수 있는 무선통신에 기반을 둔 열차제어기술에 대해 연구하였다. 현재 국내에서 사용되고 있는 신호시스템은 궤도회로 기반의 열차제어시스템으로서 열차의 이동성과 안정성을 고려하여 사용한 기술이다. 최근의 세계적 추세는 열차간격을 고밀도로 제어하기 위해 새로운 패러다임으로 떠오르고 있는 무선통신기반 열차제어시스템이다. 국내에서도 이에 대한 기술 확보가 요구되며, 이에 따른 무선통신기반 열차제어시스템의 연구개발을 추진하였다. 본 논문에서는 열차제어시스템의 구성 중 핵심적인 요소인 차상제어장치를 개발하였고, 이를 수도권 광역전철중의 하나인 분당선의 전동차에 설치하여 시험한 결과를 설명하고 있다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.48-52
• /
• 2017

In this study, we used I-V spectroscopy, photoconductivity (PC) yield and internal photoemission (IPE) yield using IPE spectroscopy to characterize the Schottky barrier heights (SBH) at insulator-semiconductor interfaces of Pt/$HfO_2$/p-type Si metal-insulator-semiconductor (MIS) capacitors. The leakage current characteristics of the MIS capacitor were analyzed according to the J-V and C-V curves. The leakage current behavior of the capacitors, which depends on the applied electric field, can be described using the Poole-Frenkel (P-F) emission, trap assisted tunneling (TAT), and direct tunneling (DT) models. The leakage current transport mechanism is controlled by the trap level energy depth of $HfO_2$. In order to further study the SBH and the electronic tunneling mechanism, the internal photoemission (IPE) yield was measured and analyzed. We obtained the SBH values of the Pt/$HfO_2$/p-type Si for use in Fowler plots in the square and cubic root IPE yield spectra curves. At the Pt/$HfO_2$/p-type Si interface, the SBH difference, which depends on the electrical potential, is related to (1) the work function (WF) difference and between the Pt and p-type Si and (2) the sub-gap defect state features (density and energy) in the given dielectric.

• 폴리머
• /
• 제30권6호
• /
• pp.572-575
• /
• 2006

사회적 관심이 되고 있는 전력선과 휴대폰의 전자파 영향에 의한 인체 유해성 문제에 대한 상대적 개념으로 암 치료에 있어서 보조요법의 일환으로 제시될 수 있는 전자파를 이용한 온열치료법 개발을 위한 기초연구로서 고분자계의 젤리팬텀을 제작하였다. 폴리에틸렌을 비롯한 다양한 구성비를 가지는 팬텀 재료의 조합을 통해 CDMA와 PCS 대역에 적용되는 인체 두뇌의 젤리팬텀을 제작한 후 전기적 특성을 분석하였다. 본 연구는 향후 제조된 젤리팬텀을 비롯한 각종 장기의 모의인체에 대한 전기적 특성 값을 분석한 다음, 자성유체를 젤리팬텀에 주입시킨 후 실제 온도상승을 온도감지 적외선 카메라로 촬영하여 확인, 젤리팬텀의 전자기적 특성 분석을 통한 암 치료에 있어서의 새로운 방법론을 제시할 수 있을 것으로 기대된다.

• 한방비만학회지
• /
• 제4권1호
• /
• pp.67-80
• /
• 2004

Objectives: Obesity is a growing epidemic with subsequent health consequences leading not only to reduced quality of life but also to increased medical costs. Recently nutritional balances are emphasized in the field of obesity, and especially maintaining proper equilibriums of minerals. The correlation of minerals obtained from the method of HTMA(Hair Tissue Mineral Analysis) with obese degree has not been studied in Korea yet. We studied any significant difference of mineral concentrations and components according to the obese degree. Methods: 78 subjects were analyzed who visited Garosero clinic of oriental medicine to lose their weight from June to November 2004. We used BMI(Body Mass Index), PBF(Percent Body Fat), WHR(Waist-Hip Ratio) and abdominal circumference obtained by bio-electrical impedance analysis as an obese degree. And we analyzed correlation with mineral concentrations and ratios obtained from HTMA. Results & Conclusion: 1. Na, K, Zn, Se had significant correlation with obese degree in case of nutritional minerals from HTMA. Especially, K had high significance. 2. Toxic minerals from HTMA had no significance with obese degree. 3. Rb had significant correlation with obese degree in case of additional minerals from HTMA. 4. Among important ratios from HTMA, Na/K had significant correlation with obese degree, but Ca/K had correlation except PBF, and Na/Mg had correlation except WHR. 5. Among toxic ratios from HTMA, Se/Hg had significant correlation with obese degree, but S/Hg had correlation except BMI. 6. Na, K, Zn, Rb, Na/K, Ca/K had significant differences between obesity groups classfied by BMI. Ob II group had sinificant difference from NW group in cases of K, Zn, Rb, Na/K, and Ob II group had sinificant difference from OW group in case of Ca/K.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.34-39
• /
• 2011

Screen printing method is a common way to fabricate the crystalline silicon solar cell with low-cost and high-efficiency. The screen printing metallization use silver paste and aluminum paste for front and rear contact, respectively. Especially the rear contact between aluminum and silicon is important to form the back surface filed (Al-BSF) after firing process. BSF plays an important role to reduces the surface recombination due to $p^+$ doping of back surface. However, Al electrode on back surface leads to bow occurring by differences in coefficient of thermal expansion of the aluminum and silicon. In this paper, we studied the properties of mono crystalline silicon solar cell for rear electrode with aluminum and aluminum-boron in order to characterize bow and BSF of each paste. The 156*156 $m^2$ p-type silicon wafers with $200{\mu}m$ thickness and 0.5-3 ${\Omega}\;cm$ resistivity were used after texturing, diffusion, and antireflection coating. The characteristics of solar cells was obtained by measuring vernier callipers, scanning electron microscope and light current-voltage. Solar cells with aluminum paste on the back surface were achieved with $V_{OC}$ = 0.618V, JSC = 35.49$mA/cm^2$, FF(Fill factor) = 78%, Efficiency = 17.13%.

• 한국자기학회지
• /
• 제25권1호
• /
• pp.16-21
• /
• 2015

광 리소그래피 공정을 이용하여 GMR-SV(Giant magnetoresistance-Spin valve) 다층박막 위에 마이크로 크기의 바이오센서용 소자와 코일-채널을 적층으로 각각 제작하였다. 직경 $1{\mu}m$ 크기인 여러 개의 자성비드가 결합된 적혈구가 마이크로 채널로 지나갈 때 코일에 인가하는 AC 신호로 정지 또는 통과하는 적혈구 움직임을 조절하였다. GMR-SV 소자 위에 포획된 적혈구-자성비드가 갖는 미세자기장은 자기저항비를 변화시켜 검출용 출력신호 특성으로 나타났다. 이것을 이용하여 자성비드를 결합한 적혈구의 막 변형에 따른 운동 특성을 분석하는 바이오센서로 활용할 수 있음을 보여주었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.208-208
• /
• 2013

Graphene has emerged as a fascinating material for next-generation nanoelectronics due to its outstanding electronic properties. In particular, graphene-based field effect transistors (GFETs) have been a promising research subject due to their superior response times, which are due to extremely high electron mobility at room temperature. The biggest challenges in GFET applications are control of carrier concentration and opening the bandgap of graphene. To overcome these problems, three approaches to doping graphene have been developed. Here we demonstrate the decoration of Ni nanoparticles (NPs) on graphene films by simple annealing for p-type doping of graphene. Ni NPs/graphene films were fabricated by coating a $NiCl2{\cdot}6H2O$ solution onto graphene followedby annealing. Scanning electron microscopy and atomic force microscopy revealed that high-density, uniformly sized Ni NPs were formed on the graphene films and the density of the Ni NPs increased gradually with increasing $NiCl2{\cdot}6H2O$ concentration. The formation of Ni NPs on graphene films was explained by heat-driven dechlorination and subsequent particlization, as investigated by X-ray photoelectron spectroscopy. The doping effect of Ni NPs onto graphene films was verified by Raman spectroscopy and electrical transport measurements.