• ETRI Journal
• /
• v.33 no.3
• /
• pp.366-373
• /
• 2011

In this paper, we propose a low-power all-digital phase-locked loop (ADPLL) with a wide input range and a high resolution time-to-digital converter (TDC). The resolution of the proposed TDC is improved by using a phase-interpolator and the time amplifier. The phase noise of the proposed ADPLL is improved by using a fine resolution digitally controlled oscillator (DCO) with an active inductor. In order to control the frequency of the DCO, the transconductance of the active inductor is tuned digitally. The die area of the ADPLL is 0.8 $mm^2$ using 0.13 ${\mu}m$ CMOS technology. The frequency resolution of the TDC is 1 ps. The DCO tuning range is 58% at 2.4 GHz and the effective DCO frequency resolution is 0.14 kHz. The phase noise of the ADPLL output at 2.4 GHz is -120.5 dBc/Hz with a 1 MHz offset. The total power consumption of the ADPLL is 12 mW from a 1.2 V supply voltage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.64-72
• /
• 2010

This paper presents a wide range VCO with fine coarse tuning step using a sigma-delta modulation technique for UWB frequency synthesizer. The proposed coarse tuning scheme provides the low effective frequency resolution without any degradation of phase noise performance. With three steps coarse tuning, the VCO has wide tuning range and fine tuning step simultaneously. The frequency synthesizer with VCO was implemented with 0.13 ${\mu}m$ CMOS technology. The tuning range of the VCO is 5.8 GHz~6.8 GHz with the effective frequency resolution of 3.9 kHz. It achieves the measured phase noise of -108 dBc/Hz at 1 MHz offset and a tuning range 16.8 % with 5.9 mW power. The figure-of-merit with the tuning range is -181.5 dBc/Hz.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.719-726
• /
• 2000

A real-time precise positioning is possible with GPS carrier phase measurements with efficient integer ambiguity resolution techniques. It is known that more reliable and fast integer ambiguity resolution is possi-ble as the number of measurements increases. Most precise positioning systems use dual frequency measurements and the wide-lnae technique to resolve integer ambiguity. The wide-lane technique magnifies the measurement noise while it reduces the number of candidates to be examined. In this paper a new integer ambiguity resolution method using dual frequency is proposed The proposed method utilizes the relationship between the wide-lane single frequency and the narrow-lane ambiguities to resolve narrow-lane integer ambiguity after fixing the wide-lane integer ambiguity. Experiments with real data show that the proposed method gives fast and reliable results.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.39-45
• /
• 2006

This paper describes an effective and fast algorithm for GPS carrier-phase ambiguity resolution (AR) which can apply for structure monitoring, and a series of simulation analyses have been carried out to demonstrate the performance of the algorithm. The results show that single-frequency AR performance is significantly improved In term of Time-To-Fix-First (TTFF) ambiguity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.5
• /
• pp.499-504
• /
• 2011

In this paper, we suggest a method for discretized frequency modulations of ultrasonic signals. A continuous sweep of frequency modulation signals can be modelled with fine levels of discretization. If the ultrasound signals are modulated with monotonically decreasing frequencies, then the cross-correlation between an emitted signal and received signal can be used to identify the distance of multiple target objects. For the discretized frequency synthesis, CF ultrasounds with different frequencies are serially ordered. The auto-correlation test with the signal shows effective results for distance estimation. The discretized frequency syntheses have better distance resolution than CF ultrasound signals and the resolution depends on the number of the combined ultrasound frequencies.

• Journal of Arbitration Studies
• /
• v.25 no.3
• /
• pp.155-184
• /
• 2015

This paper addresses the question of what kinds of dispute resolution choices can effectively handle complex intellectual property disputes, given the rising importance of IP, the increasing frequency and complexity of IP disputes, and the lack of research on dispute resolution strategies. For this analysis, the study adopted the analytic hierarchy process approach, which covers complex, multi-criteria decision problems, to quantify the expert's judgments on IP dispute resolution choice. Its results show that the effectiveness of resolution methods differs, depending on the type of IP dispute classified into seven issues, which are (i) requirement for validity of IP right, (ii) range and duration of IP right, (iii) transfer of IP right, (iv) licensing, (v) use of IP right, (vi) declaration of IP infringement, and (vii) estimation of damage. The disputes over IPR ownership and IP infringement remain challenging issues in due to strong requirement of the cross-border enforcement. Alternative dispute resolution (ADR), especially arbitration, is determined to be a more effective method to deal with international IP disputes, but various advanced types of ADR techniques should be further developed to deal with the increasing complexity of IP disputes.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.271-274
• /
• 2014

Bayesian based Multi-Frame Super-Resolution (MF-SR) has been used as a popular and effective SR model. On the other hand, the texture region is not reconstructed sufficiently because it works on the spatial domain. In this study, the MF-SR method was extended to operate on the frequency domain to improve HF information as much as possible. For this, a spatially weighted bilateral total variation model was proposed as a regularization term for a Bayesian estimation. The experimental results showed that the proposed method can recover the texture region more realistically with reduced noise, compared to conventional methods.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.201-209
• /
• 2011

This paper presents a wide-band fine-resolution digitally controlled oscillator (DCO) with an active inductor using an automatic three-step coarse and gain tuning loop. To control the frequency of the DCO, the transconductance of the active inductor is tuned digitally. To cover the wide tuning range, a three-step coarse tuning scheme is used. In addition, the DCO gain needs to be calibrated digitally to compensate for gain variations. The DCO tuning range is 58% at 2.4 GHz, and the power consumption is 6.6 mW from a 1.2 V supply voltage. An effective frequency resolution is 0.14 kHz. The phase noise of the DCO output at 2.4 GHz is -120.67 dBc/Hz at 1 MHz offset.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.240-248
• /
• 2013

In this paper, we propose a super-resolution algorithm using an adaptive weighted interpolation(AWI) and discrete wavelet transform(DWT). In general, super-resolution algorithms for single-image, probability based operations have been used for searching high-frequency components. Consequently, the complexity of the algorithm is increased and it causes the increase of processing time. In the proposed algorithm, we first find high-frequency sub-bands by using DWT. Then we apply an AWI to the obtained high-frequency sub-bands to make them have the same size as the input image. Now, the interpolated high-frequency sub-bands and input image are properly combined and perform the inverse DWT. For the experiments, we use the down-sampled version of the original image($512{\times}512$) as a test image($256{\times}256$). Through experiment, we confirm the improved efficiency of the proposed algorithm comparing with interpolation algorithms and also save the processing time comparing with the probability based algorithms even with the similar performance.

• ETRI Journal
• /
• v.44 no.6
• /
• pp.885-902
• /
• 2022

The mmWave cell-free massive MIMO (CFmMIMO), combining the advantages of wide bandwidth in the mmWave frequency band and the high- and uniform-spectral efficiency of CFmMIMO, has recently emerged as one of the enabling technologies for 6G. In this paper, we propose a novel framework for energy-efficient mmWave CFmMIMO systems that uses low-resolution digital-analog converters (DACs) and phase shifters (PSs) to introduce lowcomplexity hybrid precoding. Additionally, we propose a heuristic pilot allocation scheme that makes the best effort to slash some interference from copilot users. The simulation results show that the proposed hybrid precoding and pilot allocation scheme outperforms the existing schemes. Furthermore, we reveal the relationship between the energy and spectral efficiencies for the proposed mmWave CFmMIMO system by modeling the whole network power consumption and observe that the introduction of low-resolution DACs and PSs is effective in increasing the energy efficiency by compromising the spectral efficiency and the network power consumption.