• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.57-62
• /
• 1997

Two psychoacoustic models used in MPEG-1 employ different masking patterns, different masking indexes, and different computational procedures. As a result, Model 1 is inferior to Model 2 due to its worst case approach in computing the SMR even though it determines tonality and masking levels accurately. In this study, we investigate the performances of psychoacoustic models when we modify the MPEG-1 audio coder for variable bitrates. Simulation results show that Model 2 has a gain of 30 kbps in the dual channel mode and 20 kbps in the joint stereo mode. It is generally known that the joint stereo mode has a gain in bitrate compare to the dual channel mode. For signals with frequent attacks, this gain becomes larger in Model 1 than in Model 2. This is due to the fact that Model 1 uses the worst case approach in computing the SMR to reduce pre-echo

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.261-266
• /
• 1998

This paper describes the fabrication and characterization of dual-polysilicon gated surface channel 0.1$\mu\textrm{m}$ CMOSFETs using BF2 and arsenic as channel dopants. We have used and LDD structure and 40${\AA}$ gate oxide as an insulator. To suppress short channel effects down to 0.1$\mu\textrm{m}$ channel length, shallow source/drain extensions implemented by low energy implantation and SSR(Super Steep Retrograde) channel structure were used. The threshold voltages of fabricated CMOSFETs are 0.6V. The maximum transconductance of nMOSFET is 315${\mu}$S/$\mu\textrm{m}$, and that of pMOSFET is 156 ${\mu}$S/$\mu\textrm{m}$. The drain saturation current of 418 ${\mu}$A/$\mu\textrm{m}$, 187${\mu}$A/$\mu\textrm{m}$ are obtained. Subthreshold swing is 85mV/dec and 88mV/dec, respectively. DIBL(Drain Induced Barrier Lowering) is below 100mV. In the device with 2000${\AA}$ thick gate polysilicon, depletion in polysilicon near the gate oxide results in an increase of equivalent gate oxide thickness and degradation of device characteristics. The gate delay time is measured to be 336psec at operation voltage of 2V.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.67-71
• /
• 2010

In this paper, channel capacity analysis is investigated for design of convergence system of broadcasting and telecommunication. To do this, we derive and analyze channel capacity of the proposed system with dual-branch MRC diversity technique in correlated Hoyt fading channel. Spread spectrum watermarking scheme which is known as a robust promising technique in noisy environment can be applied to transmit additional data sequence. From numerical results, we confirm that the channel capacity of the proposed system can be determined by channel parameters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.839-844
• /
• 2003

For mass and volume reduction, input demultiplxer and output multiplexer of satellite transponder widely adopt dual-mode waveguide filters fer channel filters. Generally, channel filters of the input demultiplexer are doubly terminated and channel filters of manifold output multiplexer should be singly terminated fur correct operation. This paper gives a tuning method using short-ended dummy cavity for dual-mode cavity filters. Tuning is based on the match of the computed and measured phase response of reflection coefficient. This proposed method is applied to 4-pole dual-mode doubly terminated elliptic response filter and 6-pole dual-mode singly terminated elliptic response filter for demonstration of this new tuning method. It is shown that this method shows good agreement between the experimental and computed results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.153-158
• /
• 2009

Stable and tunable dual-wavelength erbium-doped fiber ring laser(EDFL) using a single fiber Bragg grating(FBG) and two coil heaters is proposed and demonstrated. Installing two identical coils into a single FBG, the FBG is symmetrically divided into two different portions. While a current supply to the coil, the refractive index of the FBG under the coil is changed. The FBG can operate as a joint of two different FBGs. Due to the thermo-optic effect of a fiber, the resonance wavelength split into two peaks. The spacing between two adjacent channels was changed as much as the difference of heating power. It was tuned up to 3 nm of wavelength under the electrical power with a 1000 mW. Moreover, the lasing wavelength can be individually tuned without influencing to the adjacent channel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.488-493
• /
• 2008

This paper represents a dual-mode type transmission technique for a high reliable narrow-band power line communication(PLC) modem, and its design and implementation of a system-on-chip(SoC). The proposed transmission technique is based on a Chirp modulation for the purpose of overcoming time variations of power line channel environments in the narrow-bandwidth of the frequency range of 95-145.5 kHz. The designed modem is fabricated utilizing a mixed 0.18 ${\mu}m$ CMOS technology. Especially, according to the power line channel environments the data transmission rate can be selectively changed into 2.5 kbps and 480 bps. The total hardware complexity of the implemented chip is about 50,000 gates, the power consumption is about 26mW, and the operating frequency is up to 5.12 MHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.3
• /
• pp.233-237
• /
• 2002

A giga-bit DRAM(dynamic random access memory) technology with W/WNx/poly-Si dual gate electrode is presented in 7his papers. We fabricated $0.16\mu\textrm{m}$ CMOS using this technology and succeeded in suppressing short-channel effects. The saturation current of nMOS and surface-channel pMOS(SC-pMOS) with a $0.16\mu\textrm{m}$ gate was observed 330 $\mu\A/\mu\textrm{m}$ and 100 $\mu\A/\mu\textrm{m}$ respectively. The lower salutation current of SC-pMOS is due to the p-doped poly gate depletion. SC-pMOS shows good DIBL(dram-induced harrier lowering) and sub-threshold characteristics, and there was no boron penetration.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1713-1716
• /
• 2002

In this paper, we analyzed the performance of SDR-based dual-band CDMA system in wideband multipath channel employing RAKE receiver with MRC diversity. For the simulation of SDR-based dual-band CDMA system, we used digital If techniques, polyphase analysis filter bank as channelizer, where Remez exchange algorithm is employed in the realization of the digital filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.10
• /
• pp.2620-2633
• /
• 1996

In this paper, a new high-speed local area network using a dual mode switching access (DMSA) protocol implemented on a dual unidirectional bus is described. By utilizing the implicit positionalordering of stations on a unidirectional bus, the proposed system switches between random access mode and the token access model withoug unnecessary delay. Therefore, unlike other hybrid systems such as Buzz-net and Z-net, DMSA does not show a rapid degradation in performance as the load increases. We obtain the average channel utilization and the average access delay by using a simplified analytic model. The numerical results obtained via analysis are compared to the simulation resuls for a partial validation of the approximate model. The performance characteristics of DMSA are superior delay-throughput characteristics at light and medium loads, compared to compared to other LAN systems, and the capability of providing a single active station with full capabity of the channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1074-1081
• /
• 2000

In this paper, in order to speed up the convergence process and improve the steady mean square error simultaneously, we propose the Stop-and-Go Dual Mode Modified Constant Modulus Algorithm(SAG DM MCMA) for adaptive blind channel equalization of high order QAM. The proposed algorithm is a hybrid scheme of the Modified CMA that treat error signals with real and imaginary components of the equalizer output, the concept of dual mode CMA, and Stop-and-Go algorithm. As a result it can prevent blind equalization from converging to incorrect direction and simultaneously operates reliably for tap weight adaptation. We demonstrate via simulation that the proposed algorithm achieves lower steady state mean square error and residual ISI than the conventional algorithms under high order QAM signals and severe channel environment.