• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.858-860
• /
• 2015

본 연구에서는 비대칭 이중게이트 MOSFET의 채널 내 도핑농도에 대한 드레인 유도 장벽 감소 현상에 대하여 분석하고자한다. 드레인 유도 장벽 감소 현상은 드레인 전압에 의하여 소스 측 전위장벽이 낮아지는 효과로서 중요한 단채널 효과이다. 이를 분석하기 위하여 포아송방정식을 이용하여 해석학적 전위분포를 구하였으며 전위분포에 영향을 미치는 채널도핑 농도뿐만이 아니라 상하단 산화막 두께, 하단 게이트 전압 등에 대하여 드레인 유도 장벽 감소 현상을 관찰하였다. 결과적으로 드레인 유도 장벽 감소 현상은 채널도핑 농도에 따라 큰 변화를 나타냈다. 단채널 효과 때문에 채널길이가 짧아지면 도핑농도에 따른 영향이 증가하였다. 도핑농도에 대한 드레인유도장벽감소 현상의 변화는 상하단 산화막 두께에 따라 큰 변화를 보였으며 산화막 두께가 증가할수록 도핑농도에 따른 변화가 증가하는 것을 알 수 있었다. 또한 하단게이트 전압은 그 크기에 따라 도핑농도의 영향이 변화하고 있다는 것을 알 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.863-865
• /
• 2015

본 연구에서는 비대칭 이중게이트 MOSFET의 채널 내 도핑농도분포에 대한 드레인유도장벽감소(Drain Induced Barrier Lowering; DIBL)에 대하여 분석하고자한다. DIBL은 드레인 전압에 의하여 소스 측 전위장벽이 낮아지는 효과로서 중요한 단채널 효과이다. 이를 분석하기 위하여 포아송방정식을 이용하여 해석학적 전위분포를 구하였으며 전위분포에 영향을 미치는 채널도핑농도의 분포함수변화에 대하여 DIBL을 관찰하였다. 채널길이, 채널두께, 상하단 게이트 산화막 두께, 하단 게이트 전압 등을 파라미터로 하여 DIBL을 관찰하였다. 결과적으로 DIBL은 채널도핑농도분포함수의 변수인 이온주입범위 및 분포편차에 변화를 나타냈다. 특히 두 변수에 대한 DIBL의 변화는 최대채널도핑농도가 $10^{18}/cm^3$ 정도로 고도핑 되었을 경우 더욱 현저히 나타나고 있었다. 채널길이가 감소할수록 그리고 채널두께가 증가할수록 DIBL은 증가하였으며 하단 게이트 전압과 상하단 게이트 산화막 두께가 증가할수록 DIBL은 증가하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.4
• /
• pp.324-330
• /
• 1990

In this paper, the hybrid ARQ system involving the single error correcting and double error detection (127, 119) cyclic Hamming codes and the SR(selective repeat) ARQ schemes with a finite receiver buffer has been designed and constructed. The system performance has been analyzed and simulated. As a result of the simulation, it has been shown that the transmitter retransmitted those data blocks that were detected in errors especially the request signal errors using two retransmission. The system performance was measured by throughput efficiency due to channel error effects.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.49-50
• /
• 2002

In micro-channels, the electro-viscous effect is caused by the electrical double layer on pressure-driven liquid flow. Velocity fields of flow inside micro-channels were measured using micro-PIV system for investigating the electro-viscous effect. De-ionized water and aqueous NaCl solutions with four different concentrations were used as working fluid in a PDMS micro-channel of $100{\mu}m$ width and $66{\mu}m$ height. The pressure gradient, dP/dx, was determined from the pre-determined input flow rate Q of syringe pump. The mean velocity $u_m$ used for calculating Reynolds number was obtained from the PIV velocity field data. These are used to plot the pressure gradient as a function of Reynolds numbers. The pressure gradient far lower concentration solution $(10^{-5}\;M)$ was higher than that for the higher concentration solution. The increase of flow resistance was about $30\%\;and\;37.5\%$ at Re=0.02 and 0.06, respectively.

• Annual Conference of KIPS
• /
• 2022.05a
• /
• pp.45-47
• /
• 2022

Mobile edge computing (MEC), which enables mobile terminals to offload computational tasks to a server located at the user's edge, is considered an effective way to reduce the heavy computational burden and achieve efficient computational offloading. In this paper, we study a multi-user MEC system in which multiple user devices (UEs) can offload computation to the MEC server via a wireless channel. To solve the resource allocation and task offloading problem, we take the total cost of latency and energy consumption of all UEs as our optimization objective. To minimize the total cost of the considered MEC system, we propose an DRL-based method to solve the resource allocation problem in wireless MEC. Specifically, we propose a Asynchronous Advantage Actor-Critic (A3C)-based scheme. Asynchronous Advantage Actor-Critic (A3C) is applied to this framework and compared with DQN, and Double Q-Learning simulation results show that this scheme significantly reduces the total cost compared to other resource allocation schemes

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.39.2-39.2
• /
• 2019

Diffuse radio emissions at the outskirt of merging galaxy clusters called radio relics provide a unique channel to understand the merger history. We present a recent discovery of double radio relics in the cluster merger ZwCL1447+2619 from our recent Giant Metrewave Radio Telescope observations. Both Band 3 (300-500 MHz) and Band 4 (550-850 MHz) data reveal a large (~1Mpc) and thin (~40kpc) radio relic ~1Mpc from the cluster X-ray center and a small radio relic (~0.3 Mpc) on the opposite side. These remarkable radio data together with Subaru weak-lensing analysis and Chandra X-ray observations enable us to reconstruct the merger scenario. Our preliminary analysis suggests that the cluster ZwCL J1447+2619 is a post-merger near its returning phase. In addition, using Keck DEIMOS spectroscopy, we find many "green" and "blue" member galaxies are located between the radio relics, a possible indication of merger shock-driven star formation activities.

• Clean Technology
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2022

Microfluidic paper-based analytical devices (μPADs) have recently been in the spotlight for their applicability in point-of-care diagnostics and environmental material detection. This study presents a double-sided printing method for fabricating 3D-μPADs, providing simple and cost effective metal ion detection. The design of the 3D-μPAD was made into an acryl stamp by laser cutting and then coating it with a thin layer of PDMS using the spin-coating method. This fabricated stamp was used to form the 3D structure of the hydrophobic barrier through a double-sided contact printing method. The fabrication of the 3D hydrophobic barrier within a single sheet was optimized by controlling the spin-coating rate, reagent ratio and contacting time. The optimal conditions were found by analyzing the area change of the PDMS hydrophobic barrier and hydrophilic channel using ink with chromatography paper. Using the fabricated 3D-μPAD under optimized conditions, Ni²⁺, Cu²⁺, Hg²⁺, and pH were detected at different concentrations and displayed with color intensity in grayscale for quantitative analysis using ImageJ. This study demonstrated that a 3D-μPAD biosensor can be applied to detect metal ions without special analysis equipment. This 3D-μPAD provides a highly portable and rapid on-site monitoring platform for detecting multiple heavy metal ions with extremely high repeatability, which is useful for resource-limited areas and developing countries.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.664-667
• /
• 2011

In this paper, threshold voltage characteristics have been analyzed as one of short channel effects occurred in double gate(DG)MOSFET to be next-generation devices. The Gaussian function to be nearly experimental distribution has been used as carrier distribution to solve Poisson's equation, and threshold voltage has been investigated according to projected range and standard projected deviation, variables of Gaussian function. The analytical potential distribution model has been derived from Poisson's equation, and threshold voltage has been obtained from this model. Since threshold voltage has been defined as gate voltage when surface potential is twice of Fermi potential, threshold voltage has been derived from analytical model of surface potential. Those results of this potential model are compared with those of numerical simulation to verify this model. As a result, since potential model presented in this paper is good agreement with numerical model, the threshold voltage characteristics have been considered according to the doping profile of DGMOSFET.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.576-581
• /
• 2005

In this paper. the a-Si:H TFT using ferroelectric of $SrTiO_3$ as a gate insulator is fabricated on glass. High k gate dielectric is required for on-current, threshold voltage and breakdown characteristics of TFT Dielectric characteristics of ferroelectric are superior to $SiO_2$ and $Si_3N_4$. Ferroelectric increases on-current and decreases threshold voltage of TFT and also ran improve breakdown characteristics.$SrTiO_4$ thin film is deposited by e-beam evaporation. Deposited films are annealed for 1 hour in N2 ambient at $150^{\circ}C\~600^{\circ}C$. Dielectric constant of ferroelectric is about 60-100 and breakdown field is about IMV/cm. In this paper, the TFT using ferroelectric consisted of double layer gate insulator to minimize the leakage current. a-SiN:H, a-Si:H (n-type a-Si:H) are deposited onto $SrTiO_3$ film to make MFNS(Metal/ferroelectric/a-SiN:H/a-Si:H) by PECVD. In this paper, TFR using ferroelectric has channel length of$8~20{\mu}m$ and channel width of $80~200{\mu}m$. And it shows that drain current is $3.4{\mu}A$at 20 gate voltage, $I_{on}/I_{off}$ is a ratio of $10^5\~10^8,\;and\;V_{th}$ is$4\~5\;volts$, respectively. In the case of TFT without having ferroelectric, it indicates that the drain current is $1.5{\mu}A$ at 20gate voltage and $V_{th}$ is $5\~6$ volts. If properties of the ferroelectric thin film are improved, the performance of TFT using this ferroelectric thin film can be advanced.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.127-153
• /
• 2010

This study explores the locomotives of the growth in the Korean online shopping industry upon the theoretical basis based on the last 10 years' rapid changing environment. This attempt reveals the counter-arguments against preemtive effects based on the observation of reintermediation process in the online industry. We reviewed the NEBIC model proposed by Wheeler(2002) and propose the growth model, double helix framework based on the dynamic capability view. Furthermore the relevance of the proposed framework was validated with the review of last 10 years' sales and market share data in the online shopping industry. Meanwhile we found the limits of online market growth with the open market domination. So future of the online shopping retailers is depending on the development of the channel functions and merchandising on the basis of self-capability. Based on the tentative conclusion, we also suggest implications for the policy makers. Firstly policy facilitating the specialization of the power sellers incubased in the open market is necessary for the sustainable online market growth. And the establishment of the control tower is suggested to coordinate the consistency of the policies and regulations. And the device of the incentive is also proposed to strengthen the open markets' function to facilitate the small and medium online merchants.