• 방사성폐기물학회지
• /
• 제15권2호
• /
• pp.151-159
• /
• 2017

고준위 방사성폐기물로 분류되는 사용후핵연료를 현재 기술로 가장 안전한 격리 방법으로는 500 m 심도의 안정한 암반에 심지층 처분하는 방법으로, 가장 중요한 요건은 공학적방벽인 완충재의 온도가 $100^{\circ}C$를 초과하지 않도록 시스템을 설계하는 것이다. 국내의 경우 전체 전력 소요량의 약 30% 정도를 차지하고 있는 원자력발전으로 발생되는 사용후핵연료의 양은 지속적으로 증가하여 누적되고 있어, 이들을 처분하기 위한 소요면적도 증가하고 있다. 따라서, 본 연구에서는 처분면적을 감소시킴으로써 처분효율을 향상시키기 위한 목적으로 다양한 복층처분 개념을 도출하였다. 이를 바탕으로 중요한 처분시스템 요건 만족여부를 확인하기 위하여 열해석을 수행하고 그 결과를 분석하여 처분시스템 열적 안정성을 평가하였다. 평가결과, 기준시스템 위치인 500 m 심도로부터 상부 또는 하부로 75 m를 이격한 심도에 복층으로 처분시스템 구축이 가능하였으며, 실제 부지특성자료에 따른 상세 분석이 요구된다. 본 연구결과는 사용후핵연료 관리정책 수립 및 실제 처분시스템 설계에 활용될 것으로 사료된다.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.217-222
• /
• 2011

This study was carried out in order to reduce the amount of underground water which is used in the double layered single span plastic greenhouse for retaining heat. For this research, two plastic green houses of the double layered single span plastic greenhouse were installed. There was equipped of internal small tunnel for keeping warm air in the interior of the house. Then the internal small tunnel for keeping warm air was fitted with PVC duct of 50 cm in diameter filled with subsurface water. The surplus solar energy in the greenhouse was stored in the water in the PVC duct. Four FCUs (Fan Coil Unit), which has the capacity of 8,000 kcal per hour, were installed in the middle of the house, and a circulation motor in heat storage water tank was operated from 10:30 a.m. to 16:00 p.m. in order to circulate water between the water tank and the FCUs. Consequently about 5 degrees celsius could be maintained in the interior of the internal small tunnel for keeping warm air with the external temperature of lower than minus 5 degrees celsius. It appeared that the alteration of an internal temperature of the house was flexible depending on the sunlight during daytime. To prevent the water freezing, mixing antifreezing liquid in the water or operating FCU continuously was needed. Also, in order to use the surplus solar thermal energy on plastic green house of water curtain system efficiently, storing the surplus heat during daytime simultaneously finding a method of using water curtain systematic underground water happened to be important. As a result of this research, when the house's interior temperature is below zero the operation of FCU appeared to be impossible. Considering the amount of water used in the house with water-curtain-heating system is 150~200 ton per day, using the system mentioned in this research showed that reducing the underground water more than 80% in order to maintain the internal temperature as the level of 5 degree celsius at the extreme temperature of minus 5 degrees celsius.

• Journal of Pharmaceutical Investigation
• /
• 제38권3호
• /
• pp.177-182
• /
• 2008

The purposes of this study were to prepare dual-layered coated compact pellets containing three nutrients Glucose, Chromium picolinate, Vitamin C) for rumen bypass. The core compact pellets were prepared by an extrusionspheronization method and then double layered coated with pH independent EC (ethyl cellulose) and pH-dependent polymers ($Eudragit^{(R)}$ E100) using a fluid-bed spray coater. Depending on the coating levels of EC and $Eudragit^{(R)}$ E100, release profiles were variable in simulated rumen (pH 6.8) and abomasums (pH 2.0) fluid using USP apparatus I (basket method). When compact pellets were coated with EC (about 10% level in inner layer) and then $Eudragit^{(R)}$ E100 (20% level in outer layer) in a dual-layered manner, rumen-bypass delivery resisting rumen fluid followed by release in abomasums fluid could possible. The friability was also satisfactory based on chewing behavior of ruminants. The dual-layered coated compact pellets showed smooth surface and distinct inner/outer layers using scanning electron microscopy (SEM). The current rumen bypass delivery system can be also applicable to deliver other nutrients in ruminants.

• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.49-56
• /
• 2021

This study aims to develop a form-finding algorithm for a single-layered pneumatic membrane. The initial shape of this pneumatic membrane, which is an air-supported type pneumatic membrane, is to find a state in which a given initial tension and internal pneumatic pressure are in equilibrium. The algorithm developed to satisfy these conditions is that a nonlinear optimization problem based on the force method considering the deformed shape is formulated, and, it's able to find the shape by iteratively repeating the process of obtaining a solution of the governing equations. An computational technique based on the Gauss-Newton method was used as a method for obtaining solutions of nonlinear equations. In order to verify the validity of the proposed form-finding algorithm, a single-curvature pneumatic membrane example and a double-curvature air pneumatic membrane example were adopted, respectively. In the results of these examples, it was possible to well observe the step-by-step convergence process of the shape of the pneumatic membrane, and it was also possible to confirm the change in shape according to the air pressure. In addition, the calculation results of the shape and internal force after deformation due to initial tension, air pressure, and self-weight were obtained.

• 대한수학회논문집
• /
• 제14권2호
• /
• pp.441-447
• /
• 1999

A free boundary problem is derived from a singular limit system of a reaction diffusion equation whose reaction terms are bistable type. In this paper, we shall consider a free boundary problem with two layers satisfying the zero flux boundary condition and shall show that the Hopf bifurcation can not occur as a parameter varies.

• 한국건축시공학회지
• /
• 제21권1호
• /
• pp.21-29
• /
• 2021

본 연구는 한중 환경에서 가열 보온양생을 실시한 벽식구조 아파트의 슬래브 상부 및 벽체를 대상으로 2중 버블시트 포설에 따른 온도이력 및 강도발현 특성을 저자 등에 의해 이전 연구에서 개발된 무선센서 네트워크인 Concrete IoT Management System(CIMS)를 이용하여 실시간 모니터링 및 추정하고자 하였다. 분석결과 버블시트의 단열성능에 기인하여 구조체 콘크리트의 온도가 높게 나타났다. 또한, CIMS의 경우는 콘크리트 내부온도를 30 m까지 양호하게 무선센서 네트워크로 스마트폰에 전송되어 적산온도 및 실시간 압축강도 측정으로 효율적인 초기 품질관리가 가능할 수 있음을 알 수 있었다. 초기 품질관리 결과로서 압축강도는 7일 이내에서 약 2 MPa 이내의 오차로 추정될 수 있음에 따라 버블시트의 단열효과까지 포함하여 실무에서는 거푸집 존치기간을 1사이클 당 1일 정도 단축하는 공정관리 측면에서 효과도 얻을 수 있었다.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.599-608
• /
• 2009

This manuscript covers the results of field investigation and lab-scale experiments to design a double-layered biofilter system to control urban storm runoff. The biofilter system consisted of a coarse soil layer (CSL) for filtration and fine soil layer (FSL) for adsorption and biological degradation. The variations of flow rate and water quality of runoff from a local expressway were monitored for seven storm events. Laboratory column experiments were performed using seven kinds of soil and mulch to maximize pollutants removal. The site mean concentration (SMC) of storm runoff from the drainage area (runoff coefficient: 0.92) was measured to be 203 mg/L for SS, 307 mg/L for $TCOD_{Cr}$, 12.3 mg/L for TN, 7.3 mg/L for ${NH_4}^+-N$, and 0.79 mg/L for TP, respectively. This study employed a new design concept, to cover the maximum rainfall intensity with one month recurrence interval. Effective storms for last ten years (1998-2007) in seoul suggested the design rainfull intensity to be 8.8 mm/hr Single layer soil column showed the maximum removal rate of pollutants load when the uniformity coefficient of CSL was 1.58 and the silt/clay contents of FSL was virtually 7%. The removal efficiency during operation of double layer soil column was 98% for SS and turbidity, 75% for TCODCr, 56% for ${NH_4}^+-N$, 87% for TP, and 73-91% for heavy metals. The hydraulic conductivity of the soil column, 0.023 cm/sec, suggested that the surface area of the biofilter system should be about 1% of the drainage area to treat the rainfall intensity of one month recurrence interval.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.843-847
• /
• 1999

The dc resistivity dc magnetization and thermopower of layered perovskite La1.6Ca1.4Mn2O7.07 have been studied. The ceramic sample of La1.6Ca1.4Mn2O7.07 undergoes the metal-insulator transition at 120K while a first-order phase transition from a ferromagnetic phase to a paramagnetic phae is observed at 260 K=TC This behavior is quite different from that of the well-known double exchange ferromagnets such as La1-xCaxMnO3 This phenomenon could be understood by considering the effects of the anisotropic double exchange interaction caused by two dimensional Mn-O-Mn networks in this materials. The dc magnetization between 120K and 250K is nearly constant and decreases rapidly with increasing temperature above 250K The measurements of dc resistivity and thermopower indicate that Zener polaron hopping conduction takes place above 260 K.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.113-118
• /
• 2006

최근에 무선랜은 편리함과 용도의 다양성으로 인해 가정이나 사무실 등에서 사용이 증대되고 있다. 이 무선랜의 주파수는 IEEE802.11b에 명시되어 있는 바와 같이 2.4 GHz대역을 사용하고 있지만 많은 전자기기들이 무선랜과 동일 주파수 대역을 사용하고 있으며, 특히 블루투스, 전자레인지, PDA 등과 같은 전자기기들을 같은 곳에서 사용할 경우 상호 간섭 문제가 발생할 수 있다. 그러나 이러한 문제는 전파흡수체를 사용하여 제거할 수 있다. 따라서 본 논문에서는 2.4 GHz 무선랜용 전파흡수체 개발을 위한 연구를 수행하였으며, 측정된 재료정수를 이용 시뮬레이션을 하고 그 값을 토대로 Sendust, $Al(OH)_3$, 그리고 CPE를 이용해서 2층형 전파흡수체를 두께 1.5 mm로 제작한 결과 무선랜 사용 주파수인 2.4 GHz에서 전파흡수능 10 dB 이상을 얻었다.

• 한국공간구조학회논문집
• /
• 제5권2호
• /
• pp.81-87
• /
• 2005

The Space structures may have large freedom in scale and form. And especially Hybrid structures are received much attention from the view points of their light weight and aesthetics. Hybrid systems are stable structures which are reticulated spatial structures composed of compressive straight members, struts and cables and Membranes. In this paper, The Hybrid Unit System are suggested using the Membrane and Cable elements based on the Tensegrity Unit system. Also, The Hybrid System of double-layered single curvature is presented. We analyze the force density method allowing form-finding for Tensegrity systems. And We analyze the shape analysis by the LARSH which is the program for nonlinear analysis.