• 한국약용작물학회지
• /
• 제5권3호
• /
• pp.237-242
• /
• 1997

작약(芍藥) 분주묘(分株苗)의 활착불량(活着不良) 실태(實態)와 원인(原因)을 구명하기 위하여 시험 연구한 결과는 다음과 같다. 1. 작약 분주묘의 농가 포장 활착 실태 조사 결과 활착불량 피해율은 32%에 이르고 외형적 피해 실태는 무출현(無出現) 5.6%, 출현후(出現後) 고사(桔死) 20.7%, 출현후(出現後) 위조가 5.7%였다. 2. 활착불량 피해 정도별 농가 실태는 71%이상 피해를 본 필지가 4%, $70{\sim}41%$ 피해는 13%, $40{\sim}11%$ 피해는 45%로 많은 면적이 활착불량으로 인하여 결주가 된 것으로 나타났다. 3. 농가포장에서 정식시기에 따른 활착불량(活着不良) 피해율(被害率)은 가을 정식의 경우 18.2%인데 비하여 봄정식은 42.9%로 매우 높았고 실생묘(實生苗)보다는 분주묘(分株苗)에서 피해가 더 많았다. 4. 분주후 정식까지의 경과 일수가 길수록 생육과 수량이 크게 떨어졌고 봄정식시는 활착율이 66.7%로서 매우 낮았으며 종근소독과 토양살충제 혼용처리시 생육과 활착이 양호하였으나 무처리는 불량하였다. 5. 작약 분주묘의 활착불량(活着不良) 주원인(主原因)은 뿌리썩음병(Cylindrocarpon sp.)과 불량종(不良種) 묘(苗)로 나타났다.

• 대한치과보철학회지
• /
• 제49권2호
• /
• pp.152-160
• /
• 2011

연구 목적: 상악 중절치에 여러 가지 수복물 설계와 변연부 위치를 설정하여 치아 삭제를 하였을 때 나타나는 치아 삭제량의 변화를 평가하기 위함이다. 연구 재료 및 방법: 36개의 상악 중절치 레진 인공치가 실험에 사용되었다. 수복물의 디자인에 따라 이들은 4개의 군으로 나뉘었다. 그리고 각각의 군은 다시 변연부의 위치에 따라 3개의 세부 군으로 나뉘었다. 삭제되지 않은 치아의 부피가 미세단층촬영을 이용해 측정되었고 같은 방법으로 삭제 후의 치아의 부피가 측정되었다. 이 측정된 영상들을 서로 겹쳐서 비교함으로 삭제 전과 후의 부피 변화를 알아보았다. 결과: 수복물 설계에 따른 삭제 전과 후의 부피 변화량은 다음과 같은 순서로 변화량의 차이를 보였다: traditional laminate veneer < full laminate veneer < all ceramic crown < metal ceramic crown. One-Way ANOVA와 다중비교 Tukey로 유의수준5%에서 통계 분석한 결과 각각의 군에서는 다음과 같은 순서로 변화량의 차이를 보였다: CEJ 1 mm 상방 < CEJ < CEJ 1 mm 하방 (P<.05). 부피 변화를 백분율로 나타낸 수치를 보면 all ceramic crown과 metal ceramic crown 에서는 31 - 48% 로 나타났고 laminate veneer에서는 14 - 30%로나타났다. Laminate veneer에서 나타난 부피 변화량은 metal ceramic crown의 1/3로 나타났다. The full laminate (CEJ 1 mm 하방)와 all ceramic crown (CEJ 1 mm 상방)는 유사한 부피 변화를 보였다. Metal ceramic crown은 all ceramic crown과 비교하였을 때 13.7% 더 많은 부피 변화를 보였다. 결론: 수복물의 설계와 변연부 위치의 변화에 따라 부피 변화의 차이가 존재한다.

• 한국약용작물학회지
• /
• 제6권3호
• /
• pp.198-203
• /
• 1998

작약 분주묘의 크기에 따른 생육과 품질을 조사하여 재배법 개선의 기초자료로 활용코자 1994년 10월부터 3개년간 의성에서 의성작약을 공시하여 수행한 시험 연구 결과는 다음과 같다. 1. 작약의 분주묘 크기가 클수록 출현을 및 활착율은 높은 경향이 었으며 지상부 생육도 양호하었다. 2. 소묘$(30{\sim}50g)$재배의 지하부 수량은 1,921kg/10a이었으나 중묘$(60{\sim}80g)$는 2,304kg, 대 묘$(60{\sim}80g)$는 2,674kg으로서 각각 30%, 39% 증수되어 재식종묘 크기가 클수록 증수 되었다. 3. 분주묘 크기별 뿌리 굵기 10mm이상의 상품량은 소묘재배가 1,406kg/10a인데 비하여 중묘는 1,554kg/10a, 대묘는 1,769kg/10a으로 중묘와 대묘 재배시 상품율은 각각 11%, 26%높았다. 4. 분주묘 크기별 소득은 소묘가 1,133천원/10a인 데 비하여 중묘나 대묘는 각각 28%, 48% 증가 되었고 노두 생산량도 분주묘가 클수록 증수되었다.

• 대한치과기공학회지
• /
• 제13권1호
• /
• pp.9-13
• /
• 1991

The purpose of this study was to determine the marginal fit of recasting by used nickel-chromium metal alloys, Hi-Crown, New-Crown and CB-80. Ninety crown prosthetics were divided into eighteen groups according to new to old metal ratios. Each crown was seated on its master die and then the marginal gaps were measured under optical microscope($\times$50). All groups were showed good marginal fit, except group 3 of Hi-Crown(156$\mu$m). The results suggest that the marginal fit of Ni-Cr metal alloy casting bodies were good as without concerned to mixed ratios and metals.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.139-151
• /
• 2003

This study was to evaluate and to compare the compressive strength and the displacement effecting the abutment or the residual ridge which are transformed by the angle and the heights of the konus denture inner crown when restorating the unilateral konus denture by using the mandibular canine and the 1st premolar as an abutment. The author made 9 different models for different inner crown heights and konus angles. The inner crown height were divided to 5mm, 6mm, and 7mm and konus angles was divided to $4^{\circ}$, $6^{\circ}$, and $8^{\circ}$. And then in each model, 5kg of $15^{\circ}$ mesial load was stressed on the central fossa of the 1st premolar and the 1st molar. The stresses and displacement were measured using the finite element analysis. The results were as follows 1. The maximum compressive strength was shown on the connective area of the abutment and the denture base. 2. As the angle of the inner crown becomes increased, the compressive strength was shown smaller. 3. As the height of the inner crown becomes increased, the maximum compressive strength was shown smaller while the compressive strength of the root apex and the residual ridge showed larger. 4. When the stress was loaded only on the 1st premolar, the more compressive strength was concentrated on the root apex area of the 1st premolar. 5. When the stress was loaded only on the 1st premolar, the compressive strength was concentrated uniformly on the abutment and the residual ridge. 6. When the stress was loaded only on the 1st molar, the maximum displacement was shown on the distal part of the residual ridge.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.204-220
• /
• 2007

The background of Korean Ethnical Costume was originated from those northern mounted nomadic groups, which was Scythe style Costume Culture. Through the antique records and paintings of tombs bequests hereby describe the forms of Scythian Cotume (1) Headgear : There was Conical Cap(or Pointed Cap), Feathered Cap, and Crown. (2) Clothes : Both Men and Women wore Jacket as upper garment with leftsided collars, narrow sleeves to the length of the hip line. As lower garment, they wore the tight Trousers and Kungo(:窮袴)that was attached with gusset. (3) Belts and Boots : On the upper garment bound the leather Belts that was hanged a hook that was shaped of animal form at the end. Scythian Buckles was divided into six groups, animal-shaped, animal's head shaped, animal fight-shaped, rectangle-shaped, rectangle openwork-shaped, genre scene shaped Buckle. To the Boots, they wore leather boots. (4) Ornaments : Ornaments divided into Dress Trimming(:Gold plaques), Earrings, Necklaces(;Torques), Bracelets, Rings. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Earrings consisted of a plain ring and pendant ring was a middle ornament hung from it to a pendants which hung was made of heart shaped leaves of the tree, beads-linked. Scythian Torques were divided into several types according to the shape, Torque with Terminal style, Spiral style, Layers style, Crescent-shaped pectoral style, Crown style. Scythian Bracelet were divided into 4 styles according to the shape, Bracelets with ends shaped like beasts style, Spiral style, Layers style, Crown with openwork style. Rings were rhomb-shaped and animal shaped styleRings (5) Animal motifs used in Scythian ornaments appears that in some cases the work was intended to be purely ornamental, while many times the motifs had symbolic meaning (such as the successful dominance of the aggressor over the victim portrayed in the attack scenes). Magical use of symbols may have been inten-ded to guarantee the power of the aggressor.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.338-343
• /
• 2020

PURPOSE. The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet. MATERIALS AND METHODS. Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms. RESULTS. The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square. CONCLUSION. Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.53-59
• /
• 1982

An in vitro study was performed in order to evaluate the restoring methods in the endodontically treated molar teeth. 68 extracted teeth were divided into 4 groups according to the restoring techniques. The teeth of first group were restored by amalgam. Those of second group were restored by the stainless steel post and amalgam. The teeth of the third group were restored by the amalgam with crown. The teeth of the fourth group were restored by the stainless steel post and amalgam core with crown. All the specimens were tested and measured for the fracture load by means of the Instron (UTM-111-500 Toyo Baldwin Co., LTD. Japan) and the Pressure Instrument (Yonsei University, Department of Metal Engineering.) The results were as follows; 1. There were no statistical differences in the fracture loads between the amalgam restoration and post-amalgam core restorative techniques. 2. The techniques of amalgam core with crown showed lower fracture loads those of post and amalgam core with crown. 3. In the crowned teeth, they presented higher fracture loads than those without crown.

• Journal of Oral Medicine and Pain
• /
• 제13권1호
• /
• pp.13-21
• /
• 1988

The author studied the vertical height of tooth crown and the amounts of alveolar bone resorption with age. All 84 subjects(44 male, 40female) who visited Dental hospital of Wonkwang University with no history of sever periodontal disease and no experience of periodontal surgery. 84 subject were divided into 3 groups by age, that is, group I(28-32yrs), group II(38-42yrs), and group III(48-52yrs). Informal radiogram with bite wing film(horizontal angulation : $0^{\circ}$, vertical angulation : $+5^{\circ}~+10^{\circ}$) were taken on premolar and molar area. The distances from cusp tip to cementoenamel junction (vertical height of tooth crown) and from cementoenamel junction alveolar crest(amount of alveolar bone resorption) were measured, and then recorded data from 946 teeth were statistically analysed. This study was undertaken to obtain the data for age estimation by the changes of tooth crown height and alveolar bone resorption in the point of forensic odontology. The obtained results were as follows : 1. The average crown height of mandibular right 1st. molar was 7.1mm in group I, 6.7mm in group II, and 6.6mm group III, and the average amount of alveolar bone resorption on mandibular right 1st. molar were 1.8mm in group I, 2.5mm in group II, and 3.0mm in group III. Ratio of tooth crown height to amount of alveolar bone resorption was 4.0:1 in groupI, 2.7:1 in group II, and 2.2:1 in group III, the ratio was decreased with age. 2. In comparison with upper teeth and lower teeth in ipsilateral side, the average value of tooth crown height and amount of alveolar bone resorption were slightly higher in upper arch than those in lower arch, but there was not a statistically significant difference. 3. The ratio of height of tooth crown to amount of alveolar bone resorption was decreased with age, and which depended mainly upon the change of amount of alveolar bone resorption rather than the change of tooth crown height.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.334-340
• /
• 2020

Purpose: This study aimed to compare three-dimensional adaptation with the rinsing time of the temporary crown produced using the digital light processing method. Methods: The maxillary right first molar abutment was scanned with a dental scanner. A temporary crown was designed with the scanned abutment. The designed crown was made of 10 temporary crowns using a digital light processing printer. The crowns were divided into the 5-minute and 10-minute rinsing groups; 5 temporary crown washes were performed for each group. In order to obtain the internal data, each group was scanned for a temporary crown. The three-dimensional fit was measured by superimposing the scanned internal surface data and the abutment data. The average comparison of three-dimensional adaptation was analyzed using the Mann-Whitney U test. Results: The 5-minute rinsing group showed a significantly higher adaptation of 71.42±3.08 ㎛ as compared to the 10-minute rinsing group (67.52±0.92 ㎛) (p<0.05). Conclusion: When making a temporary crown with a digital light processing method, a rinsing time of 10 minutes is appropriate.