• The Journal of the Acoustical Society of Korea
• /
• v.30 no.6
• /
• pp.303-307
• /
• 2011

This paper describes an audio watermarking using Quantization Index Modulation (QIM) on significant peaks in frequency domain. The audio signal is broken up into L samples length frames with non-overlapping and rectangular window. The zero-crossing rate of each frame is calculated for decision whether it is proper to be watermarked or not. If the frame is legitimate, frequency magnitude response is computed by discrete Fourier transform. For the QIM, we set the quantization step size based on maximum value of frequency magnitude response and select n significant peaks with w samples around them in frequency domain, totally $n{\times}(w+1)$ samples. Finally, watermark embedding is performed. Decoder extract watermarks based on Euclidean distance, that is a blind detection. The proposed method is robust against many attacks of watermark benchmark.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.5
• /
• pp.461-470
• /
• 2018

In this study, the leak signal was measured by using an accelerometer to analyze the basic data and methodology for the development of the leak point estimation method in the water supply pipe. The measured results were analyzed by frequency analysis and cross-correlation analysis for leakage signals, and the error range was compared and analyzed with the actual leak point distance. As a result, it was confirmed that the vibration intensity due to leakage from the water leakage point was attenuated according to the distance. In the case of the ductile iron casting used in the experiment, the intensity of the signal at the 945 Hz, 1,500 Hz, 2,300 Hz band was increased with the change of the pressure in the pipe at 4mm of leakage hole. Also, it was confirmed that as the water pressure increases, the intensity of the leak signal increases but the similarity of the signal decreases. The results of this study confirm that the accelerometer sensor can be used efficiently for leak detection and it can be used as a basic data for the analysis for the development of leak point estimation method in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.827-829
• /
• 2016

In this paper, in order to achieve the user's convenience in golf putting during practice, to provide a method of tracking the golf ball using a high speed camera. This is recently, it is to analyze so that you can hit a golf putting part of the leisure sport to enjoy a lot of people accurately. The proposed method, the pixel when using a common USB camera is blurred, since the golf ball detection rate is low and using a high-speed camera capable of measuring up to per second 380 frames. First, by using the Hough transform after pretreatment, to detect a golf ball. Movement path by using the information subsequently detected golf ball, calculating the moving distance and angle. The proposed method result of applying, improved travel route detection rate of the golf ball is improved, the accuracy of the moving distance and angle.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2677-2684
• /
• 2009

In this paper, we study a watermarking method based on the informed coding and embedding by means of trellis code and entropy masking. An image is divided as $8{\times}8$ block with no overlapping and the discrete cosine transform(DCT) is applied to each block. Then the 16 medium-frequency AC terms of each block are extracted. Next it is compared with gaussian random vectors having zero mean and unit variance. As these processing, the embedding vectors with minimum value of linear combination between linear correlation and Watson distance can be obtained by Viterbi algorithm at each stage of trellis coding. For considering the image characteristics, we apply different weight value between the linear correlation and the Watson distance using the entropy masking. To evaluate the performance of proposed method, the average bit error rate of watermark message is calculated from different several images. By the experiments the proposed method is improved in terms of the average bit error rate.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.5
• /
• pp.649-654
• /
• 2005

In this paper, we describe an implementation of real-time face recognition system under ubiquitous computing environments. First, face image is captured by PDA with CMOS camera and then this image with user n and name is transmitted via WLAN(Wireless LAN) to the server and finally PDA receives verification result from the server The proposed system consists of server and client parts. Server uses PCA and LDA algorithm which calculates eigenvector and eigenvalue matrices using the face images from the PDA at enrollment process. And then, it sends recognition result using Euclidean distance at verification process. Here, captured image is first compressed by the wave- let transform and sent as JPG format for real-time processing. Implemented system makes an improvement of the speed and performance by comparing Euclidean distance with previously calculated eigenvector and eignevalue matrices in the learning process.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.28-35
• /
• 2023

Moiré patterns emerge due to the interference between the non-emission area of the LED screen and the grid line in an image sensor of a video recording device when taking a video in the presence of the LED screen. To reduce the moiré intensity, we have fabricated an anti-moiré filter using hollow glass microspheres (HGMs) by slot-die coating. The LED screen has a large non-emission area because of a large pitch (distance between LED chips), causing more severe moiré phenomenon, compared with a display panel having a very narrow black matrix (BM). It is shown that HGMs diffuse light in such a way that the periodicity of the screen is broken and thus the moiré intensity weakens. To quantitatively analyze its moiré suppression capability, we have calculated the spatial frequencies of the moiré fringes using fast Fourier transform. It is addressed that the moiré phenomenon is suppressed and thus the amplitude of each discrete spatial frequency term is reduced as the HGM concentration is increased. Using the filter with the HGM concentration of 9 wt%, the moiré fringes appeared depending sensitively on the distance between the LED screen and the camera are almost completely removed and the visibility of a nature image is enhanced at a sacrifice of luminance.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.158-168
• /
• 2024

There is hardly any person in modern times who has not taken soft drinks instead of drinking water. The rate of people taking soft drinks being surprisingly high, researchers around the world have cautioned from time to time that these drinks lead to weight gain, raise the risk of non-communicable diseases and so on. Therefore, in this work an image-based tool is developed to monitor the nutritional information of soft drinks by using deep convolutional neural network with transfer learning. At first, visual saliency, mean shift segmentation, thresholding and noise reduction technique, collectively known as 'pre-processing' are adopted to extract the location of drinks region. After removing backgrounds and segment out only the desired area from image, we impose Discrete Wavelength Transform (DWT) based resolution enhancement technique is applied to improve the quality of image. After that, transfer learning model is employed for the classification of drinks. Finally, nutrition value of each drink is estimated using Bag-of-Feature (BoF) based classification and Euclidean distance-based ratio calculation technique. To achieve this, a dataset is built with ten most consumed soft drinks in Bangladesh. These images were collected from imageNet dataset as well as internet and proposed method confirms that it has the ability to detect and recognize different types of drinks with an accuracy of 98.51%.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.29-35
• /
• 2009

In this paper by using the image taken from the rear of the vehicle to effectively extract the license plate and how to recognize the characters appearing in the offer. How to existing research on the entire video by following the pre-edge (edge) images to obtain yijinhwa. Qualified heopeu in a binary image (Hough) to convert the horizontal and vertical lines to obtain, using the characteristics of the plates to extract the license plate area. The problem with this method, the processing time is so difficult to handle real-time status of irregular points, and visual contrast with yagangwan border does not appear in the plates to extract the license plate area is that it is not. In addition, the rear of the vehicle license plate area from images taken using the characteristics of the plates myeongamgap changes sutjapok in the area, background area and the number number area of the region confirmed the contrast of the car and identified the number and the number of 42 of distance to extract the license plate area. How to research, the existing damage to the border of the plate to fail to extract the license plate area, a matter of hours to resolve problems in real-time, practical application is processed. Chapter 100 as the results of the experiment the sample video image in a car that far experiment results automatically read license plates have been able to extract the license plate and failing to represent 13% of images, character recognition result of failing to represent the image was 0.4%

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.97-107
• /
• 2009

In image-based gait recognition systems, physical factors, such as the camera angle and the lens distortion, and environmental factors such as illumination determines the performance of recognition. In this paper we present a robust gait recognition method by compensating various types of image distortions. The proposed method is compared with existing gait recognition algorithm with consideration of both physical and environmental distortion factors in the input image. More specifically, we first present an efficient compensation algorithm of image distortion by using the projective transform, and test the feasibility of the proposed algorithm by comparing the recognition performances with and without the compensation process. Proposed method gives universal gait data which is invariant to both distance and environment. Gained data improved gait recognition rate about 41.5% in indoor image and about 55.5% in outdoor image. Proposed method can be used effectively in database(DB) construction, searching and tracking of specific objects.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.642-651
• /
• 2015

A vanishing point is a point where parallel lines converge, and they become evident when a camera's lenses are used to project 3D space onto a 2D image plane. Vanishing point detection is the use of the information contained within an image to detect the vanishing point, and can be utilized to infer the relative distance between certain points in the image or for understanding the geometry of a 3D scene. Since parallel lines generally exist for the artificial structures within images, line-detection-based vanishing point-detection techniques aim to find the point where the parallel lines of artificial structures converge. To detect parallel lines in an image, we detect edge pixels through edge detection and then find the lines by using the Hough transform. However, the various textures and noise in an image can hamper the line-detection process so that not all of the lines converging toward the vanishing point are obvious. To overcome this difficulty, it is necessary to assign a different weight to each line according to the degree of possibility that the line passes through the vanishing point. While previous research studies assigned equal weight or adopted a simple weighting calculation, in this paper, we are proposing a new method of assigning weights to lines after noticing that the lines that pass through vanishing points typically belong to artificial structures. Experimental results show that our proposed method reduces the vanishing point-estimation error rate by 65% when compared to existing methods.