• 전기학회논문지
• /
• 제58권7호
• /
• pp.1255-1262
• /
• 2009

The present study explained the phenomenon that low frequency oscillation is synchronized with discrete data obtained from a wide area system, and a sync search method. When a disturbance occurs in an power system, various controllers operate in order to maintain synchronization. If the system's damping is poor, low frequency oscillations continue for a long time and the oscillations are synchronized with one another at specific frequency. The present study estimated dominant modes, magnitude and phase of signals by applying parameter estimation methods to discrete signals obtained from an power system, and performed sync search among wide area signals by comparing the estimated data. Sync search was performed by selecting those with the same frequency and damping constant from dominant oscillation modes included in a large number of signals, and comparing their magnitude and phase. In addition, we defined sync indexes in order to indicate the degree of sync between areas in a wide area system. Furthermore, we proposed a wide area sync search method by normalizing mode magnitude in discrete data obtained from critical generator of the wide area. By applying the sync search method and sync indexes proposed in this study to two area systems, we demonstrated that sync scanning can be performed for discrete signals obtained from power systems.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.156-164
• /
• 2000

In this study, a discrete time model for a simplified front wheel suspension system which has nonlinear dampling and stiffness property is introduced. The model is estimated from the discrete data which are generated based on the real car parameter. The performance of the proposed method is evaluated through numerical simulation, and the simulation results show that the proposed method can estimate the nonlinear behavior of the suspension system very well.

• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.70-77
• /
• 1984

This paper represents a fast computational algorithm for the discrete sine transform defined by Kekre and Solanki. Techniques are developed to factor the discrete sine trans form matrix into M=log2 2N matrices, where the number(N) of sampled data points is a power of two. Each factorial matrix contains not more than two non-zero real elem tints in any row or column. As a result of this method, the exact a배orithm for the fast discrete sine transform is accomplished. The algorithm is illustiated by a signal flow graph, which may be readily translated to hardware or software implementation.

• 한국멀티미디어학회논문지
• /
• 제19권1호
• /
• pp.22-29
• /
• 2016

Hidden Markov Model is one of the most successful and popular tools for modeling real world sequential data. Real world signals come in a variety of shapes and variabilities, among which temporal and spectral ones are the prime targets that the HMM aims at. A new problem that is gaining increasing attention is characterizing missing observations in incomplete data sequences. They are incomplete in that there are holes or omitted measurements. The standard HMM algorithms have been developed for complete data with a measurements at each regular point in time. This paper presents a modified algorithm for a discrete HMM that allows substantial amount of omissions in the input sequence. Basically it is a variant of Baum-Welch which explicitly considers the case of isolated or a number of omissions in succession. The algorithm has been tested on online handwriting samples expressed in direction codes. An extensive set of experiments show that the HMM so modeled are highly flexible showing a consistent and robust performance regardless of the amount of omissions.

• 한국CDE학회논문집
• /
• 제6권1호
• /
• pp.40-47
• /
• 2001

In reverse engineering, existing products are digitized fur the computer modeling. Using the digitized data, surfaces are modeled for new products. However, in the digitizing process measuring errors or deviations can be happened often in practice. Thus, it is important to adjust such errors or deviations during the computer modeling. To adjust the errors, fairing of the modeled surfaces is performed. In this paper, we present a surface fairing algorithm based on various fairness metrics. Fairness metrics can be discrete. We adopt discrete metrics for fairing given 3D point set. The fairness metrics include discrete principal curvatures. In this paper, automatic fairing process is proposed for fairing given 3D point sets for surfaces. The process uses various fairness criteria so that it is adequate to adopt designers'intents.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.169-173
• /
• 2001

This study presents the results of decoupling of free decay roll test data by discrete wavelet transform. Free roll decay test was performed to decide the coefficients of damping terms in equation of motion. During the experiment, a slight yaw motion was found while the model was in the free roll decay motion. Discrete wavelet transform was applied to the signal to extract the pure roll motion. The results were compared to those of the Fourier transform. DWT was able to decouple the two signals efficiently while the Fourier transform was not.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.852-856
• /
• 2005

This paper proposes a new design of the ECG simulator with high resolution by using small amount of memories based on discrete least square estimation equations instead of reading the stored data inside the look-up table. The experimental results have shown that the ECG simulator using discrete least square estimation equations can display the bipolar limb leads ECG signals with low PRD (percent root-mean-square difference) while taking the less amount of memories than the previous method which used the look-up table to store ECG data for ECG simulation.

• 한국멀티미디어학회논문지
• /
• 제21권1호
• /
• pp.61-68
• /
• 2018

In this paper, we present an effective encryption algorithm for 3D printing models in the frequency domain of discrete cosine transform to prevent illegal copying, access in the secured storage and transmission. Facet data of 3D printing model is extracted to construct a three by three matrix that is then transformed to the frequency domain of discrete cosine transform. The proposed algorithm is based on encrypting the DC coefficients of matrixes of facets in the frequency domain of discrete cosine transform in order to generate the encrypted 3D printing model. Experimental results verified that the proposed algorithm is very effective for 3D printing models. The entire 3D printing model is altered after the encryption process. The proposed algorithm is provide a better method and more security than previous methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.340-340
• /
• 2000

This paper aims at deriving an equivalent finite dimensional discrete-time system for H$_{\infty}$ type problem for sampled-data control systems. A widely used ph is based on the lifting technique, but it needs somewhat complicate computation. Instead this paper derives an equivalent finite-dimensional discrete-time system directly from a description of the sampled-data system which is achieved via a closed-loop expression of the worst-case intersample disturbance.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.324-329
• /
• 2003

Spectral analysis is an important signal processing tool for time series data. The transformation of a time series into the frequency domain is the basis for a significant number of processing algorithms and interpretive methods. Recently developed transforms based on the new mathematical field of wavelet analysis bypass the resolution limitation and offer superior spectral decomposition. The discrete wavelet transform of Sonar data provides spectral localization of noises, hence noises can be filtered out successfully.