• Journal of fish pathology
• /
• v.19 no.2
• /
• pp.155-164
• /
• 2006

Tissue distribution and residue depletion of oxytetracycline (OTC) and tetracycline (TC) following dipping administration were evaluated in olive flounder (Paralichthys olivaceus), rockfish (Sebastes schlegeli), and red sea bream (Pagrus major) under field conditions. Fishes were held in floating cages placed in sea water and fed a commercial diet for 15 days to acclimate to a new surrounding. Fishes were dipped in OTC 50 g/ton water for 30min and TC 18 g/ton water for 5 hours. Blood and muscle were sampled from fishes on 0th, 1th, 2th, 3th, and 5th day after administration. After solid-phase extraction, OTC and TC analyses were carried out by HPLC. The recovery rate of OTC in serum and muscle samples was 71-77% and 78-84%, respectively. Also, the recovery rate of TC in serum and muscle samples was 70-79% and 73-78%, respectively. The results of recovery rate were similar to previous studies reported. At the termination of dipping administration of OTC and TC, residue concentration in muscle samples of rockfish was significantly higher than those of olive flounder and red sea bream. At day 5, residue concentrations of all samples were believed to decrease to lower than 0.05 mg/kg, the detection limit. The present study showed that residue concentrations of OTC and TC decreased to below 0.05 mg/kg after treatment 5th day, faster than the established withdrawal period. The tissue reside depletion time of dipping administration of OTC and TC seems to be shorter than those of oral or parenteral administration.

• Research in Plant Disease
• /
• v.23 no.2
• /
• pp.168-176
• /
• 2017

Root-dipping inoculation method has been widely used to determine the resistance of watermelon to Fusarium oxysporum f. sp. niveum causing Fusarium wilt. Although this method leads to the precise results of plant disease responses, more rapid and efficient assay methods have been still required because the root-dipping inoculation method is labor-intensive and time-consuming. In this study, we established a simple and effective bioassay method based on the comparison of various inoculation methods and growth conditions. To develop the system, the occurrence of Fusarium wilt on four resistant and susceptible cultivars was investigated by four different inoculation methods, root-dipping, scalpel, tip and soil-drenching methods. Of these inoculation methods, scalpel method resulted in clear plant disease resistance responses with the simplicity. With the use of scalpel method, we also explored the disease development of the cultivars depending on inoculum concentration, growth stage of seedlings, and incubation temperature after inoculation. Furthermore, we found that the resistance degrees of 23 cultivars derived by scalpel inoculation method were similar to the results by root-dipping method established previously.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.151-162
• /
• 2011

Methanol and hexane extracts from 35 species in 27 families of herbal plants were evaluated for their acaricidal activities against two-spotted spider mite, Tetranychus urticae by leaf-dipping and spraying methods in laboratory, pot and field, respectively. Acaricidal activities were different depending on herbal plants. When T. urticae was released on leaves of Phaseolus vulgaris var. humilis that were dipped in the 1,000 ppm hexane extracts from fruits of Torreya nucifer and Daphan genkwa, seeds of Xanthium strumarium and Pharbitis nil at one minute they experienced 56.8, 47.8, 47.7, and 47.7% mortalities, respectively. Dipping time influenced acaricidal activity, that is, one minute dipping was more effective than 30 second dipping of Phaseolus vulgaris var. humilis leaves. However, extracts of X. strumarium and P. nil seeds had comparatively high activities. Concentration of hexane extract of X. strumarium and P. nil seeds revealing LC50 were 1,824 and 1,899 ppm, respectively. Extracts of both plants from hot and cold water were not effective representing <20% mortality at 1,000 ppm. However, hexane extracts of X. strumarium and P. nil seeds were effective against T. urticae on P. vulgaris var. humilis representing 76.3 and 71.3% mortalities in pot, respectively. Control effects of hexane extract of P. nil seed were 50.8 and 35.1% at 2,000 and 1,000 ppm against T. urticae on Chrysanthemum morifolium in greenhouse, respectively.

• Journal of the Korean Ceramic Society
• /
• v.30 no.7
• /
• pp.589-597
• /
• 1993

The optimum sol solution for making alumina membrane was synthesized by using sol-gel method with aluminium isopropoxide. Two types of supports were made from the $\alpha$-Al2O3 powder. The porosities of supports could be controlled by the forming methods and the heat treatment conditions. After the support was coated with optimum sol solution and heat-treated at 50$0^{\circ}C$ for 1hour, the thickness of crack-free membrane could be controlled reproductively with dipping time.

• Journal of the Korean Ceramic Society
• /
• v.31 no.4
• /
• pp.359-366
• /
• 1994

Tow types of supports were made using $\alpha$-Al2O3 powder and optimum conditions to prepare for supports were provided. Sol solution for coating was synthesized by sol-gel method with aluminum isopropoxide. Supports were coated and heat-treatemented, where the thickness of coating layer was controlled by dipping time. Flux and permeability of alumina membrane were measured by liquid and gas filtration apparatus and these were compared with the provided model. It was confirmed that the coating was done very well without micro~crack and defect.

• Research in Plant Disease
• /
• v.21 no.3
• /
• pp.201-207
• /
• 2015

This study was conducted to establish a simple mass-screening method for resistant melon to Fusarium wilt caused by Fusarium oxysporum f. sp. melonis (FOM). Root-dipping inoculation method has been used to investigate resistance of melon plants to Fusarium wilt. However, the inoculation method requires a lot of labor and time because of complicate procedure. To develop a simple screening method on melon Fusarium wilt, occurrence of Fusarium wilt on susceptible and resistant cultivars of melon according to inoculation method including root-dipping, soil-drenching, tip, and scalpel methods was investigated. Scalpel and tip methods showed more clear resistant and susceptible responses in the melon cultivars than root-dipping inoculation method, but tip method represented slightly variable disease severity. In contrast, in the case of soil-drenching inoculation method, disease severity of the susceptible cultivars was very low. Thus we selected scalpel method as inoculation method of a simple screening method for melon Fusarium wilt. By using the scalpel inoculation method, resistance degrees of the cultivars according to incubation temperature after inoculation (25 and $30^{\circ}C$) and inoculum concentration ($1{\times}10^6$ and $1{\times}10^7conidia/ml$) were measured. The resistance or susceptibility of the cultivars was hardly affected by all the tested conditions. To look into the effectiveness of scalpel inoculation methods, resistance of 22 commercial melon cultivars to FOM was compare with root-dipping inoculation method. When the melon cultivars were inoculated by scalpel method, resistance responses of all the tested cultivars were clearly distinguished as by root-dipping method. Taken together, we suggest that an efficient simple mass-screening method for resistant melon plant to Fusarium wilt is to sow the seeds of melon in a pot (70 ml of soil) and to grow the seedlings in a greenhouse ($25{\pm}5^{\circ}C$) for 7 days, to cut the root of seedlings with a scalpel and then pour a 10 ml-aliquot of the spore suspension of $1{\times}10^6conidia/ml$ on soil. The infected plants were cultivated in a growth room at 25 to $30^{\circ}C$ for about 3 weeks with 12-hr light a day.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.1
• /
• pp.36-47
• /
• 2023

This study was conducted to develop a mass production for a commercial use by germination of 4 kinds of Veronica glabrifolia Kitag., V. pusanensis Y.N.Lee, V. glabrifolia Kitag. × V. Spicata 'Alba' and V. spicata 'Ulster Blue Dwarf × V. longifolia. Veronica L. Effects of dipping time to a disinfecting fluid, light quality, temperature or vermiculite depth on the germination of Veronica L. were examined. Germination percentage in a disinfecting fluid for 120 minutes dipping was the 75.1% for V. pusanensis Y.N.Lee, and was some higher in 60 minutes dipping for all the species, but there was no significant difference according to the dipping time. The germination of the light quality was the best in complex light (red light + blue light) as the germination 92.8%, uniformity 2.3 in Veronica glabrifolia Kitag., or the germination 85.9%, uniformity 3.5 in V. pusanensis Y.N.Lee. And the germination percentage of red light was ranged from 79.1% to 95,5%, the blue light was 83.1% to 100% in the all species. However the germination in the dark condition significantly lowered as a 40.0% to 56.3% or uniformity from 5.2 to 6.5. Like this, the germination of blue light was better compare to the red light. The germination rate according to temperature was higher at 25℃ day/20℃ night ranged from 92.1% to 100%, or at 20℃ day/15℃ night as a 85.5% to 98.9% in the all species, compare to constant temperature 25℃ as a 80.9% in V. pusanensis Y.N.Lee. The germination rate of vermiculite depth was higher in 1 to 2mm ranged from 83.4% to 100%, however when the vermiculite was covered with 4mm, the germination rate significantly decreased from 45.2% to 72.1% and the hypocotyl length became longer above 3cm than that of others.

• Membrane Journal
• /
• v.4 no.1
• /
• pp.38-45
• /
• 1994

The experiment was conducted to evaluate the effects of variables in preparing TFC membrane by interfacial polymerization. Obtained results are as follow: As the concentration of MPD increses, the rejection rate incresed, the total volume flux was decresed. As the dipping time in MPD solution increases, the rejection rate increased, the total volume flux was increased until reach optimum point. As the dipping time in TMC solution increses, the total volume flux increased, the rejection rate was increased until reach optimum point. As the curing temperature increases, the total volume flux increased was an optimum point in the rejection rate. Since the quantity of generating hydrochloric acid was small, the required quantity of NaOH for neutriliztion was small. The post-treatment with ethanol, isopropanol and water in the temprerature ranging of $5~7^{\circ}C$ brought an increment of the rejection and the total volume flux, For water temperature ranging of $5~7^{\circ}C$was the optimum temperature in the post treatment.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.1
• /
• pp.67-73
• /
• 2017

PURPOSE. The aims of the study were to evaluate the fracture load of zirconia core material after dipping in coloring liquid at different time intervals and to compare the color of dipped blocks with that of prefabricated shaded blocks. MATERIALS AND METHODS. 3-unit bridge frameworks were designed digitally. Sixty frameworks were fabricated using uncolored zirconia blocks by CAD/CAM and divided into 4 groups randomly (n = 15). Group 2 (G2) was subjected to coloring liquids for 2 minutes, Group 4 (G4) for 4 minutes, and Group 6 (G6) for 6 minutes. CFS group was not subjected to any coloring procedure. After coloring, color differences between the test groups and a prefabricated shaded zirconia group (CPZ, n = 15) were evaluated by using a spectrophotometer. Fracture test was conducted immediately after shade evaluation with a Testometric test device at a cross-head speed of 1 mm/sec. Statistical analysis for evaluating color and fracture load was performed by using one way ANOVA followed by Tukey HSD test ($P{\leq}.05$). Weibull analysis was conducted for distribution of fracture load. RESULTS. There was no difference in terms of fracture load and color between CFS (1176.681 N) and G2 (985.638 N) group and between CPZ (81.340) and G2 (81.140) group, respectively. Fracture load values of G4 (779.340 N) and G6 (935.491 N) groups were statistically significantly lower than that of CFS group ($P{\leq}.005$). The color values of G4 (79.340) and G6 (79.673) groups were statistically different than that of CPZ group ($P{\leq}.005$). CONCLUSION. Prolonged immersion of zirconia in coloring liquid not only negatively affected the fracture load of the zirconia being tested in the current study but also deteriorated the desired shade of the restoration.

• Membrane Journal
• /
• v.8 no.1
• /
• pp.29-41
• /
• 1998

Thin-film composite reverse osmosis membranes of aromatic polyamides were prepared by the interfacial polymerization. Aromatic polyamides as active skin layer were made from the interfacial polymerization of MPD(m-phenylene diamine) in the aqueous and TMC(trimesoyl chloride) in HCFC(1,1-dichloro-1-fluoroethane) organic solvent. The performances of the various reverse osmosis composite membranes prepared by changing processing variables were examined. The performance of membrane manufactured by batch system was varied with organic solvent, monomer concentration, dipping time, heat treatment temperature, acid acceptor, ethanol post treatment, and acid post treatment. Ethanol post treatment was the most dominant factors in increasing permeate amount, while the monomer concentration and dipping time were the main factors in increasing selectivity. The spiral-wound module was produced with the membrane prepared at optimum condition of the continuous process. Comparing the performance of this membrane module made here with that of commercial membrane module, the permeate flux was increased by 33% while the rejection was decreased by 5%.