• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

• 대한전자공학회논문지SD
• /
• 제46권4호
• /
• pp.1-9
• /
• 2009

본 논문에서는 디스플레이 시스템을 위한 소면적 12-bit 300MSPS의 D/A 변화기(DAC)를 제안한다. 최근 SoC(System-On-Chip) 경향에 맞는 소면적 DAC를 구현하기 위한 전체적인 구조는 6-MSB(Most Significant Bit) + 6-LSB(Least Significant Bit)의 full matrix 구조로 설계 하였다. 고해상도 동작에 요구되는 output impedance을 만족하는 monitoring bias 구조, 고속 동작 및 소면적 디지털 회로 구성을 위하여 logic과 latch 및 deglitching 역할을 동시에 할 수 있는 self-clocked switching logic을 각각 제안하였다. 설계된 DAC는 Samsung $0.13{\mu}m$ thick gate 1-poly 6-metal N-well CMOS 공정으로 제작되었다. 제작된 DAC의 측정결과 INL (Integrated Non Linearity) / DNL (Differential Non Linearity)은 ${\pm}3LSB$ / ${\pm}1LSB$ 이하로 나타났으며, 300MHz 샘플링 속도와 15MHz의 출력신호에서 SFDR은 약 70dB로 측정되었다. DAC의 유효면적은 $0.26mm^2$ ($510{\mu}m{\times}510{\mu}m$)로 기존의 DAC에 비하여 최대 40% 감소된 초소면적으로 구현되었으며, 최대 전력 소모는 100mW로 측정되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권2호
• /
• pp.108-113
• /
• 2013

This paper describes a low power asynchronous successive approximation register (SAR) type 12b analog-to-digital converter (ADC) for biomedical applications in a 0.35 ${\mu}m$ CMOS technology. The digital-to-analog converter (DAC) uses a capacitive split-arrays consisting of 6-b main array, an attenuation capacitor C and a 5-b sub array for low power consumption and small die area. Moreover, splitting the MSB capacitor into sub-capacitors and an asynchronous SAR reduce power consumption. The measurement results show that the proposed ADC achieved the SNDR of 68.32 dB, the SFDR of 79 dB, and the ENOB (effective number of bits) of 11.05 bits. The measured INL and DNL were 1.9LSB and 1.5LSB, respectively. The power consumption including all the digital circuits is 6.7 ${\mu}W$ at the sampling frequency of 100 KHz under 3.3 V supply voltage and the FoM (figure of merit) is 49 fJ/conversion-step.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.48-55
• /
• 2006

This paper describes the antenna based GPS anti-jamming technology called CRPA(Controlled Reception Pattern Antenna), which used $2{\times}2$ array elements. In this system, the main functions are the antenna complex weight control and the GPS digital I/Q VM(Vector Modulator). To update the VM's I/Q complex weights, the PC based DAC(Digital to Analog Converter) module was also used and the two analog output voltages were applied to the $2{\times}2$ array elements to synthesize the null pattern. In the study, we also simulated the $2{\times}2$ GPS array null patterns to compare the null depth with experimental results. The VM was also modified at the frequency of 1.575GHz for the GPS L1 and controlled by the PC based VM software.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.713-718
• /
• 2016

Predicting precise specifications of differential mixed-signal circuits is a difficult problem, because analytically derived correlation between process variations and conventional specifications exhibits the limited prediction accuracy due to the phase unbalance, for most self-tests. This paper proposes an efficient prediction technique to provide accurate specifications of differential mixed-signal circuits in a system-on-chip (SoC) based on a nonlinear statistical nonlinear regression technique. A spectrally pure sinusoidal signal is applied to a differential DUT, and its output is fed into another differential DUT through a weighting circuitry in the loopback configuration. The weighting circuitry, which is employed from the previous work [3], efficiently produces different weights on the harmonics of the loopback responses, i.e., the signatures. The correlation models, which map the signatures to the conventional specifications, are built based on the statistical nonlinear regression technique, in order to predict accurate nonlinearities of individual DUTs. In production testing, once the efficient signatures are measured, and plugged into the obtained correlation models, the harmonic coefficients of DUTs are readily identified. This work provides a practical test solution to overcome the serious test issue of differential mixed-signal circuits; the low accuracy of analytically derived model is much lower by the errors from the unbalance. Hardware measurement results showed less than 1.0 dB of the prediction error, validating that this approach can be used as production test.

• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1627-1634
• /
• 2021

본 논문은 저전력 뉴럴 네트워크 가속기 SOC를 위한 아날로그 Convolution Filter용 저전력 초소형 ADC 회로 및 칩 설계 기술을 소개한다. 대부분의 딥러닝의 학습과 추론을 할 수 있는 Convolution neural network accelerator는 디지털회로로 구현되고 있다. 이들은 수많은 곱셈기 및 덧셈기를 병렬 구조로 구현하며, 기존의 복잡한 곱셉기와 덧셈기의 디지털 구현 방식은 높은 전력소모와 큰 면적을 요구하는 문제점을 가지고 있다. 이 한계점을 극복하고자 본 연구는 디지털 Convolution filter circuit을 Analog multiplier와 Accumulator, ADC로 구성된 Analog Convolution Filter로 대체한다. 본 논문에서는 최소의 칩면적와 전력소모로 Analog Accumulator의 아날로그 결과 신호를 디지털 Feature 데이터로 변환하는 8-bit SAR ADC를 제안한다. 제안하는 ADC는 Capacitor Array의 모든 Capacitor branch에 Split capacitor를 삽입하여 모든 branch의 Capacitor 크기가 균등하게 Unit capacitor가 되도록 설계하여 칩면적을 최소화 한다. 또한 초소형 unit capacitor의 Voltage-dependent capacitance variation 문제점을 제거하기 Flipped Dual-Capacitor 회로를 제안한다. 제안하는 ADC를 TSMC CMOS 65nm 공정을 이용하여 설계하였으며, 전체 chip size는 1355.7㎛², Power consumption은 2.6㎼, SNDR은 44.19dB, ENOB는 7.04bit의 성능을 달성하였다.

• 한국통신학회논문지
• /
• 제36권1A호
• /
• pp.28-34
• /
• 2011

본 논문에서는 소출력 우선 통신 기기(SRD : Short Range Device)에 적용 기능한 광대역 하이브리드 직교 폴라 송신(Wideband Hybrid Quadrature Polar transmitter) 구조를 제시하였다. 먼저 시스템 성능 분석을 위한 시뮬레이션 환경을 구축한 후 송신기 성능 파라미터들에 의한 성능 열화 분석을 실시하였다. 주요 성능 열화 요인으로 VVA(Voltage Variable Attenuator)의 슬루율(Slewrate), 크기 및 위상 신호의 시간 지연 그리고 DAC(Digital-to-Analog Converter) 비트수를 고려하였으며, 성능 열화 분석 시뮬레이션을 통해서 송신기 요구 규격을 만족하는 최소 요구 파라미터 값을 확인하였다. 또한 성능 분석 결과를 바탕으로 광대역 하이브리드 직교 폴라 송신기 플랫폼을 구현하였고 3GPP 표준 규격을 참조하여 송신기 성능 측정 및 분석을 실시하였으며 그 결과를 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.518-521
• /
• 1998

This paper describes a 3.3V-65MHz 12BIT CMOS current-mode DAC designed with a 8 MSB current matirx stage and a 4 LSB binary weighting stage. The linearity errors caused by a voltage drop of the ground line and a threshold voltage mismatch of transistors have been reduced by the symmetrical routing method with ground line and the tree structure bias circuit, respectively. In order to realize a low glitch energy, a cascode current switch ahs been employed. The simulation results of the designed DAC show a coversion rate of 65MHz, a powr dissipation of 71.7mW, a DNL of .+-.0.2LSB and an INL of .+-.0.8LSB with a single powr supply of 3.3V for a CMOS 0.6.mu.m n-well technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.504-510
• /
• 2015

This paper presents a power and area efficient SAR ADC for multi-channel near threshold-voltage (NTV) applications such as neural recording systems. This work proposes a split dual-capacitive-array (S-DCA) structure with shifted input range for ultra low-switching energy and architecture of multi-channel single-ended SAR ADC which employs only one comparator. In addition, the proposed ADC has the same amount of equivalent capacitance at two comparator inputs, which minimizes the kickback noise. Compared with conventional SAR ADC, this work reduces the total capacitance and switching energy by 84.8% and 91.3%, respectively.

• 한국정보통신학회논문지
• /
• 제12권4호
• /
• pp.691-698
• /
• 2008

본 논문은 상위 7-비트와 하위3-비트의 binary-thermal decoding 방식과 segmented 전류원 구조로서 전력소모, 선형성 및 글리치 에너지 등 주요 사양을 고려하여, 3.3V 10비트 CMOS D/A 변환기를 제안한다. 동적 성능을 향상 시키기위해 출력단에 return-to-zero 회로를 사용하였고, segmented 전류원 구조와 최적화 된 binary-thermal decoding 방식으로 D/A 변환기가 가질 수 있는 장점은 디코딩 논리 회로의 복잡성을 단순화함으로 칩면적을 줄일 수 있다. 제안된 변환기는 $0.35{\mu}m$ CMOS n-well 표준공정을 이용한다. 설계된 회로의 상승/하강시간, 정착시간, 및 INL/DNL은 각각 1.90/2.0ns, 12.79ns, ${\pm}2.5/{\pm}0.7\;LSB$로 나타난다. 또한 설계된 D/A 변환기는 3.3V의 공급전원에서는 250mW의 전력소모가 측정된다.