• Journal of Pharmaceutical Investigation
• /
• v.37 no.2
• /
• pp.95-99
• /
• 2007

To develop topical nitroglycerin (NTG) preparation far chronic anal fissure treatment, the release rate of NTG should be controlled carefully. For this, microemulsion was prepared from the phase diagram construction with Cremophor ELP, ethanol and Labrafil $M1944CS^{(R)}$ and the topical gel was prepared by dispersing NTG containing microemulsion into hydrophilic polymers. in viかo release characteristics were evaluated with Franz diffusion cell using cellulose membrane and compared with control hydrogels. The release rate of NTG was followed $1^{st}$ order kinetics and, when comparing the NTG release from control hydrogel with that from the microemulsion-based hydrogel, the NTG release rate was controlled by the content of polymers within continuous phase and the concentration of dispersed phase.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.4
• /
• pp.252-260
• /
• 1996

A study was conducted to examine the precipitation phenomena of Al-2.1Li-2.9Cu alloy by differential scanning calorimetry and transmission electron microscopy. DSC curves were measured over the temperature range of $25{\sim}550^{\circ}C$ at a heating rate of $2{\sim}20^{\circ}C$/min.. Three heat evolution peaks and three heat absorption peaks were observed in the DSC curve for the as-quenched specimen. From DSC results and TEM analysis, it was proved that the precipitation sequence in the as-quenched specimen is supersaturated solid solution ${\rightarrow}$ GP zone ${\rightarrow}{\delta}^{\prime}{\rightarrow}T_1{\rightarrow}T_2$ and ${\theta}^{\prime}$ was detected in the peak aged specimen at $160^{\circ}C$. The major phase formed at peak hardeness in the aging at $160^{\circ}C$ was ${\delta}^{\prime}$ phase. The activation energies for the formation of ${\delta}^{\prime}$ and $T_1$ phases were 22.3kcal/mole and 24.3kcal/mole, respectively. These lower activation energies than those for diffusion of Cu and Li in Al are ascribed to the quenched-in excess vacancies.

• Journal of East-West Nursing Research
• /
• v.20 no.2
• /
• pp.73-80
• /
• 2014

Purpose: This research aims to identify the physio-psychological effects of applying a qi massage program as an independent complementary intervention for employees with hypertension in a workplace. Methods: A quasi-experimental design was employed using a nonequivalent control group with pre- and post-tests. The study was performed from August 18 to October 10, 2008 on hypertensive employees being treated with a qi massage program in a company. The control group was recruited first to prevent treatment diffusion. The experimental group was subsequently recruited and received individual treatment for 30 minutes. Collected data was analyzed using SPSS16.0 version. ${\chi}^2$-test, Mann-Whitney U test, Wilcoxon signed ranks test, Fisher's exact test and paired t-test were implemented in order to examine the effects of individual intervention on patients who are treated with the qi massage program. Results: The experimental group showed a greater improvement in systolic blood pressure, diastolic pressure, stress, and quality of life than did the control group. Conclusion: A qi massage program may be implemented as a complementary intervention to effectively treat hypertensive persons.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.179-184
• /
• 1995

Phosphorous was deped in silicon thin films by Ion Mass Doping and Changes in the electrical resistance with respect tko heat treatments were investigated. SOI(Silicon On Insulator) thin films which contain few grain boundaries prepared by ZMR(Zone Melting Recrystallization) of polysilicon films, polysilicon films which have about 1500 $A^{\rarw}$ of grain size prepared by LPCVD at 625.deg. C, and amorphous silicon thin films prepared by LPCVD at low temperature were used as substrates and thermal behavior of phosphorous after RTA(Rapid Thermal Annealing) and furnace annealing was carefully studied. Amorphous thin films showed about 10$^{6}$ .OMEGA./ㅁbefore any heat treatment, while polycrystalline and SOI films about 10$^{3}$.OMEGA./¤. All these films, however, showed about 10.OMEGA./ㅁafter furnace annealing at 700.deg. C for 3hrs and RTA showed about the same trend. Films with grain boundaries showed a certain range of heat treatment which rendered increase of the electrical resistance upon annealing, which could not be observed in amorphous films and segregation of doped phosphorous by diffusion with annealing was thought to be responsible for this abnormal behavior.

• Korean Journal of Ecology and Environment
• /
• v.49 no.2
• /
• pp.124-129
• /
• 2016

This study was conducted to suggest the cause analysis and mitigation measures of foaming generated in the effluent of wastewater treatment plant. The foam generated in the outlet connected with the tidal river system was identified as structural problems. And the main cause of foaming was air entrainment by an impinging jet and the internal accumulation by the diffusion barrier. In consideration of these conditions, it present the effective ways such as micro-screen and submerged outlet, to mitigate the foaming generated in the water channel and outlet end.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2020

This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y₂O₃, BaCO₃ and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.324-329
• /
• 2004

Oxygen diffuses through the cation-specific membrane, reducing the coulomb yield of the fuel cell. In the present study, attempts were made to enhance current generation from the fuel cell by lowering the oxygen diffusion, including the uses of ferricyanide as a cathode mediator and of a platinum-coated graphite electrode. Ferricyanide did not act as a mediator as expected, but as an oxidant in the cathode compartment of the microbial fuel cell. The microbial fuel cell with platinum-coated graphite cathode generated a maximum current 3-4 times higher than the control fuel cell with graphite cathode, and the critical oxygen concentration of the former was 2.0 mg $1^{-1}$, whilst that of the latter was 6.6 mg $1^{-1}$. Based on these results, it was concluded that inexpensive electrodes are adequate for the construction of an economically feasible microbial fuel cell with better performance as a novel wastewater treatment process.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.219-227
• /
• 1996

The purpose of this research is to develop the technology for the synthesis of (Ti,Al)N powder, which shows simultaneously the excellent properties of TiN and AlN, from the Ti-Al intermetallic compounds by the direct nitriding method. The effects of variables such as temperature, Ti-Al intermetallic compounds ($TiAl_3$, TiAl and $Ti_3Al$) were investigated by TG, XRD and SEM. The (Ti,Al)N powder can be easily synthesized from the intermetallic compounds by the direct nitriding method. Among the intermetallic compounds, the nitriding behavior increased with TiAl> $Ti_3Al$ > $TiAl_3$, as the difference of diffusion coefficient for nitrogen in each materials. The ternary nitride such as $Ti_2AlN$ and $Ti_3Al_2N_2$ can be synthesized by the direct nitriding method, although the ternary nitride coexist with TiN and AlN. The ternary nitrides are stable below $1400^{\circ}C$, but these are gradually decomposed into TiN and AlN above $1400^{\circ}C$.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.262-264
• /
• 2005

$Bi_{2}Sr_{2}CaCu_{2}O_{x}$(Bi-2212) and $Bi_{2}Sr_{2}Ca_{2}Cu_{3}O_{y}$(Bi-2223) high-$T_{c}$ superconductor(HTS) coating have been prepared by plasma spraying and heaat treatment. The Bi-2212 HTS coating later is synthesized through the peritectic reaction between Sr-Ca-Cu oxide coating layer and Bi-Cu oxide coating later, and $Bi_{2}Sr_{2}CaCu_{2}O_{y}$(Bi-2212) superconducting phase grow by partial melting process. The superconducting characteristic depends strongly on the conditions of the partial melting process. the Bi-2212 HTS layer consists of the whiskers grown in the diffusion direction. Above the 2212 layer, Bi-2223 phase and secondary phase was observed. The secondary phase is distributed uniformly over the whole surface. This is caused to the microcrack on the coatings surface. Despite everything, the film shows superconducting with an onset $T_{c}$ of about 115K. There are two changes steps. One changes (1step) at 115K is due to the diamagnetism of the Bi-2223 phase and the other changes (2step) at 78K is due to the diamagnetism of the Bi-2212 phase.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.394-399
• /
• 2008

Growth and electronic structure of pentacene film on silicon oxide before and after octadecyltrichlorosilane (OTS) treatment have been studied by photoelectron spectroscopy and photoelectron emission microscopy. On the OTS-treated surface, due to the weak interaction between the substrate and pentacene, the diffusion of pentacene is enhanced and domain size gradually grows, leading to a gradual change of the HOMO offset position. On the bare silicon oxide, the change of the HOMO position is marginal because of relatively strong interaction between the substrate and pentacene from the beginning.