Browse > Article
http://dx.doi.org/10.9714/psac.2020.22.1.001

A parameter study on the pre-heat treatment for the fabrication of a large grain YBCO bulk superconductor without intermediate grinding step  

Hong, Yi-Seul (Korea Polytechnic University)
Kim, Chan-Joong (Korea Atomic Energy Research Institute)
Lee, Hee-Gyoun (Korea Polytechnic University)
Publication Information
Progress in Superconductivity and Cryogenics / v.22, no.1, 2020 , pp. 1-6 More about this Journal
Abstract
This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y2O3, BaCO3 and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.
Keywords
REBCO; bulk superconductors; carbon; Ostwald ripening; cracks;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 E.. Galystyan, R. Pratap, G. Majjkic, M. Mehdi. V.Mohan and V. Selvamanickam, "Correlation between microstructure and In-field performance of Zr-added REBCO coated conductor made by advanced MOCVD", IEEE. Trans. On Appl. Supercond., vol. 29, 5, 8001206(6 pp), 2019
2 D. Uglietti, "A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors", Supercond. Sci. Technol., vol. 32, p. 053001 (29 pp) 2019
3 S. Sathyamurthy, C. Thieme and M. W. Rupich "American Superconductor: Second Generation Superconductor Wire-From Research to Power Grid Applications", Springer Series in Materials Science 224, Springer International Publishing Switzerland. pp. 131-165, 2016
4 S. Hahn, K. Kim, K. Kim, X. Hu, T. Painter, I. Dixon, S. Kim, K. R. Bhattarai, S. Noguchi, J. Jaroszynski and D. C. Larbalestier, "45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnet", Nature, 570, pp. 496-500, 2019   DOI
5 J. B. Na, H. G. Sung, C. Y. Choi, Y. S. Jang, and Y. Hun "Design of 23kV 50MVA class HTS Cable in South Korea", IOP Conf. Series: Journal of Physics: Conf. Series 1054, p. 012073(9 pp), 2018
6 J. Liu, L. Wang, Y. Wang, Q. Wang, and Y. Dai "Design of a 30-T superconducting magnet for quantum oscillation application", IEEE. Trans. On Appl. Supercond., vol. 29, 5, 4301205(5 pp), 2019
7 Y. Shi, F. Liu, H. Liu, Y. Tan, X. Zhang, H. Jin, M. Yu, L. Lei, and L. Guo, "Quasi-Round HTS Conductor Using REBCO Tapes for Fusion Magnet Application", IEEE. Trans. On Appl. Supercond., vol. 30, 1, 4800104(5 pp), 2020
8 M. Murakami, "Processing and Applications of Bulk RE-Ba-Cu-O Superconductors", Int. J. Appl. Ceram. Technol., 4[3], pp. 225-241, 2007   DOI
9 J. H Durrell, M. D Ainslie, D. Zhou, P. Vanderbemden, T. Bradshaw, S. Speller, Filipenko and D. A Cardwell, "Bulk superconductors-a roadmap to applications", Supercond. Sci. Technol. 31, 103501 (17pp), 2018
10 M. Morita, S. Takebayashi, M. Tanaka, K. Kimura, K. Miyamoto, and K. Sawano "Quench and melt growth (QMG) process for large bulk superconductor fabrication, "Adv. Supercond. Vol. 3, pp. 733-736, 1991.
11 S. Meslin and J. G. Noudem, "Infiltration and top seeded grown mono-domain $YBa_2Cu_3O_{7-x}$ bulk superconductor," Supercond. Sci. Technol., vol.17, pp.1324-1328, 2004   DOI
12 C-J Kim, Jee YA Jee, SC Kwon, TH Sung and GW Hong " Control of YBCO growth at the compact/substrate interface by bottom seeding and $Yb_2O_3$ coating in seeded melt-growth processed YBCO oxides using a MgO substrate, " Physica C, vol. 315, pp. 263-270, 1999.   DOI
13 B. G. Marchionini, Y. Yamada, L. Martini and H. Ohsaki, "High-Temperature Superconductivity: A roadmap for electric power sector applications, 2015-2030", IEEE. Trans. On Appl. Supercond., vol. 27, 4, 0500907(7 pp), 2017
14 P. Schaetzle, G. Krabbes, G. Stover, G. Fuchs and D. Schlafer, "Multi-seeded melt crystallization of YBCO bulk material for cryogenic applications, " Supercond. Sci. Technol. vol. 12, pp. 69-76, 1999.   DOI
15 Y.A. Jee, C.-J. Kim, T.-H. Sung and G.-W. Hong, "Top-seeded melt growth of Y-Ba-Cu-O superconductor with multi-seeding, "Supercond. Sci. Technol. vol. 13, pp. 195-201, 2000   DOI
16 T. Nakamura, D. Tamada, Y. Yanagi, Y. Itoh, T. Nemoto, H. Utumi, and K. Kose, "Development of a superconducting bulk magnet for NMR and MRI", J. Magnetic Resonance. 258, pp. 68-75, 2015
17 J. Li, Y. Shi, A.R. Dennis, D.K. Namburi, J. H. Durrel, W. Yang and D. A. Cardwell, "A novel pre-sintering technique for the growth of Y-Ba-Cu-O superconducting single grains from raw metal oxides", Supercond. Sci. Technol. 30, 095001 (9pp), 2017
18 M. Wang, J. Ma, X. Wang. C. Hu and W. Yang, "A Low-Cost Fabrication Technique for the Growth of Single-Domain GdBCO Bulk Superconductor from Raw Metal Oxides", J. of Superconductivity and Novel Magnetism, 31, pp.3835-3840, 2018   DOI
19 Y.S. Hong, C.J. Kim and H.G. Lee, "Direct fabrication of a large grain YBCO bulk superconductor without intermediate grinding step", Progress in Supercond. and Cryoge., Vol.21, No.3, pp.27-31, 2019   DOI
20 T. M. Shaw, D. Dimos, P. E. Baston, A. G. Schrott, D. R. Clarke and P. R. Duncombe, "Carbon retention in $YBa_2Cu_3O_{7-{\delta}}$ and its effect on the superconducting transition ", J. Mater. Res. 5(6), pp. 1176-1184, 1990   DOI
21 P. Diko, A. Kasardova, J. Miskuf and K. Csach, "Analysis of $YBa_2Cu_3O_{7-{\delta}}$ crystal growth from $BaCO_3-CuO-Y_20_3$ charges", Journal of AUoys and Compounds, 186, pp. 361-367, 1992   DOI
22 H. Fjellvag, P. Karen, A. Kjekshus, P. Kofstad, T. Norby, "Carbonatization of $YBa_2Cu_3O_{6+x}$", Acta Chem. Scand., A 42, pp. 178-184, 1987
23 T. Aselage and Keith Keefer, "Liquidus relations in Y-Ba-Cu oxides", J. Mater. Res. 3 (6), pp. 1279-1291, 1988   DOI
24 L. S. Bru, "liquid-assisted ultra-fast growth of superconducting films derived from chemical solutions", Ph.D. thesis, University of Barcelona, 2019
25 U. Balachandran, R.B. Poeppel, J.E. Emerson, S.A. Johnson,1, M.T. Lanagan, C.A. Youngdahl, Donglu Shi, K.C. Goretta and N.G. Eror, "Synthesis of a phase-pure orthorhombic $YBa_2Cu_3O_x$ under low oxygen pressure", Materials Letters, 61, pp. 2859-2861, 2007   DOI
26 G. Selvaduray and C. Zhang, U. Balachandran, Y. Gao, K. L. Merkle, H. Shi, and R. B. Poeppel, "Effect of $CO_2$ on the processing of Y-Ba-Cu-0 superconductors", J. Mater. Res., Vol. 7, No. 2, pp. 283-291, 1992   DOI
27 L Vojtkova, P Diko and D Volochova, "Melting of SmBa2Cu3O7-y-seeds during preparation of YBCO Bulk Superconductors by Infiltration Growth Method", Journal of Physics: Conference Series, 695, p. 012011(6 pp), 2016
28 X. Chauda, S. Meslin, J. Noudem, C. Harnois, L. Porcar, D. Chateigner and R. Tournier, "Isothermal growth of large YBaCuO single domains through an artificial array of holes", Journal of Crystal Growth, 275, pp. e855-e860, 2005   DOI
29 T.Y. Li, L. Cheng, S.B. Yan, L.J. Sun, X. Yao, Y. Yoshida and H. Ikuta, "Growth and Superconductivity of REBCO bulk processed by a seed/buffer layer/precursor construction", Supercond. Sci. Tech., 23, p. 125002(4 pp) 2010
30 J. Qian, L. T. Ma, G. Hai Du, H. Xiang, Y. Liu, Y. Wan, S. M. Huang, X. Yao, J. Xiong and B. Tao "A novel seed/buffer-layer construction for enlarging c-directional growth sector in high performance $YBa_2Cu_3O_{7-d}$ bulk", Scripta Materialia, 150, pp. 31-35, 2018   DOI
31 Y.S. Hong, S.D. Park, C.J. Kim and H.G. Lee, "Fabrication of a high magnetization YBCO bulk superconductor by a bottom-seeded melt growth method", Progress in Supercond. and Cryoge., Vol.21, No.4, pp.19-23, 2019   DOI
32 Ch. Krauns, M. Sumita, M. Tagami, Y. Yamada and Y. Shiohara, "Solubility of RE elements into Ba-Cu-O melts and the enthalpy of dissolution", Z. Phys., B96, pp. 207-212, 1994
33 S. Nariki, M. Matsui, N. Sakai and M Murakami, "Refinement of RE211 particles in melt-textured RE-Ba-Cu-O bulk superconductors", Supercond. Sci. Technol., vol. 15, pp. 679-682, 2002   DOI
34 M. Kambara, Y. Watanabe, K. Miyake, A. Endo, K. Murata, Y. Shiohara and T. Umeda, "Effect of initial composition on distribution of RE211(422) particles in RE123 superconductors ", J. Mater. Res., Vol. 12, No. 11, pp. 2873-2879, 1997   DOI
35 A. Endo, H. S. Chauhan, T. Egi, and Y. Shiohara "Macrosegregation of $Y_2Ba_1Cu_1O_5$ particles in $Y_1Ba_2Cu_3O_{7-{\delta}}$ crystals grown by an undercooling method", J. Mater. Res., Vol. 11, No. 4, pp. 795-803 1996   DOI