• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.399-406
• /
• 1996

This paper presents a method of hierarchical state estimation of the time-varying linear systems via Block-pulse function(BPF). When we estimate the state of the systems where noise is considered, it is very difficult to obtain the solutions because minimum error variance matrix having a form of matrix nonlinear differential equations is included in the filter gain calculation. Therefore, hierarchical approach is adapted to transpose matrix nonlinear differential equations to a sum of low order state space equation from and Block-pulse functions are used for solving each low order state space equation in the form of simple and recursive algebraic equation. We believe that presented methods are very attractive nd proper for state estimation of time-varying linear systems on account of its simplicity and computational convenience. (author). 13 refs., 10 figs.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.667-669
• /
• 1995

This paper presents a method to design Kalman filter on continuous stochastic dynamical systems via BPFT(block pulse functions transformation). When we design Kalman filter, minimum error valiance matrix is appeared as a form of nonlinear matrix differential equations. Such equations are very difficult to obtain the solutions. Therefore, in this paper, we simply obtain the solutions of nonlinear matrix differential equations from recursive algebraic equations using BPFT. We believe that the presented method is very attractive and proper for the evaluation of Kalman gain on continuous stochastic dynamical systems.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.251-257
• /
• 2015

This work presents modelling and simulation of a readout integrated circuit (ROIC) design considering pair-wise serial configuration along with thermal modeling of an uncooled microbolometer array. A fully differential approach is used at the input stage in order to reduce fixed pattern noise due to the process variation and self-heating-related issues. Each pair of microbolometers is pulse-biased such that they both fall under the same self-heating point along the self-heating trend line. A ${\pm}10%$ process variation is considered. The proposed design is simulated with a reference input image consisting of an array of $127{\times}92$ pixels. This configuration uses only one unity gain differential amplifier along with a single 14-bit analog-to-digital converter in order to minimize the dynamic range requirement of the ROIC.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.1
• /
• pp.59-64
• /
• 2011

A low noise and low power RF front-end for 5.8 GHz DSRC (Dedicated Short Range Communication) receiver is presented. The RF front-end is composed of a single-to-differential two-stage LNA and a Gilbert down-conversion mixer. In order to remove an external balun and 5.8 GHz LC load tuning circuit, a single-to-differential LNA with capacitive cross coupled pair is proposed. The RF front-end is fabricated in a 0.13 ${\mu}m$ CMOS process and draws 7.3 mA from a 1.2 V supply voltage. It shows a voltage gain of 40 dB and a noise figure (NF) lower than 4.5 dB over the entire DSRC band.

• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.233-241
• /
• 1991

Structures, fabrication, and characteristics of top-surface-emitting GaAs four quantum well microlaser are described. The microlasers have good room-temperautre CW characteristivs. The maximum CW laser output is >3mW from a 30 $\mu\textrm{m}$ diameter microlaser and the maximum differential quantum efficiency is >70% from a 10 $\mu\textrm{m}$ diameter microlaser. Active surface emitting laser logic devices are designed and fabricated as a discrete version of a top-surface-emitting laser and heterojunction phototransistor. The active surface emitting laser logic device have high optical gain (>20 overall, >200 differential) and very high on/off ratio. Two-dimensional arrays of top-surface-emitting microlasers and active surface emitting laser logic devices will be critical elements for optical computing, photonic switching and neural network applications.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.107-111
• /
• 2000

We extend numerical analysis investigating the waveguide parameter dependency of the two resonant frequencies at the small-signal gain regime in a waveguide free-electron laser to the case that there exists a nonlinear coupling. The properties of the nonlinear interaction between the two resonant waves, one with higher frequency and positive slippage and the another one with lower frequency and negative slippage, are numerically investigated in the high gain regime. The results of numerical work with a set of partial differential equations describing the space and time interaction of the two resonant waves are analyzed.

• Journal of electromagnetic engineering and science
• /
• v.8 no.3
• /
• pp.91-95
• /
• 2008

This paper presents a direct-conversion I/Q up-mixer block, which supports $3{\sim}5$ GHz ultra-wideband(UWB) applications. It consists of a VI converter, a double-balanced mixer, a RF amplifier, and a differential-to-single signal converter. To achieve wideband characteristics over $3{\sim}5$ GHz frequency range, the double-balanced mixer adopts a shunt-peaking load. The proposed RF amplifier can suppress unwanted common-mode input signals with high linearity. The proposed direct-conversion I/Q up-mixer block is implemented using $0.18-{\mu}m$ CMOS technology. The measured results for three channels show a power gain of $-2{\sim}-9$ dB with a gain flatness of 1dB, a maximum output power level of $-7{\sim}-14.5$ dBm, and a output return loss of more than - 8.8 dB. The current consumption of the fabricated chip is 25.2 mA from a 1.8 V power supply.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.260-264
• /
• 2005

This paper describes the ultra precise position control of servo motor using sinusoidal encoder based on 'Arcsine Interpolation Method'. First, the paper theoretically analyzes and verify throughout experiments, the relationship between A/D converter input ripple and the total resolution to measure the precise position. Second, this paper presents a way to compensate the total gain and offset error by utilizing a low cost programmable differential amp, by which without any special expensive equipments they are easily on-line tuned and effectively compensated. Lastly, it was compared to servomotor position control characteristics using digital incremental 50,000ppr encoder. The test results show that, with much cheaper sinusoidal encoder, the proposed method exhibits better performance both in position control and ASD applications than the 50,000ppr optical encoder.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.73-83
• /
• 1993

The temporal differential equation describing the build-up of the space-charge field in the presence of square and sinusoidal alternating field in photorefractive materials is solved analytically. We also measured the average two-wave mixing gain and the full temopral gain variations in a B$i_{12}$Si$O_{20}$ crystal with applied fields of up to 7 KV/cm amplitude and 1 KHz repetition rate. It has been found that the experimental measurements agree well with the theoretical results.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.221-224
• /
• 2012

We propose a Readout Integrated Circuit (ROIC), which applies a fixed current bias sensing method to the input stage in order to simplify the circuit structure and the infrared sensor characteristic control. For the sample-and-hold stage to display and control a signal detected by the infrared sensor using a two-dimensional (2D) focal plane array, a differential delta sampling (DDS) circuit is proposed, which effectively removes the FPN. In addition, the output characteristic is improved to have wider bandwidth and higher gain by applying a two-stage variable gain amplifier (VGA). The output characteristic of the proposed device was 23.91 mV/$^{\circ}C$, and the linearity error rate was less than 0.22%. After checking the performance of the ROIC using HSPICE simulation, the chip was manufactured and measured using the SMIC 0.35 um standard CMOS process to confirm that the simulation results from the actual design are in good agreement with the measurement results.