• KSTLE International Journal
• /
• 제8권1호
• /
• pp.1-6
• /
• 2007

Chromatic device was developed using light emitting diodes, optic fibers and photodiodes. Chromatic ratio and total contamination parameters based on transmitted light intensity in Red, Green, and Blue wavelengths were used for oil chemical and particulate contamination assessment. Chromatic ratio criterion was found independent of the particulate contamination of oil; but depended on chemical degradation, being more sensitive for synthetic than mineral hydraulic oil. Total contamination index of the sensor depended on both the chemical degradation and particulate contamination of the oil; being most sensitive in blue wavelength, and least in the red. Test results for synthetic hydraulic oils monitored corroborated with results of other tests such as viscosity, total acid number, elemental optical emission spectroscopy, particulate counts and UV-VIS photospectrometry. Chromatic ratio showed a clearer indication of oil degradation, compared to key monitoring parameters such as total acid number, viscosity and particle counts. The results showed that these parameters are effective criteria for the condition monitoring of synthetic hydraulic oils.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.23-27
• /
• 2015

Recently, the use of ion-exchange strengthened glass has increased sharply, as it is now used as the cover glass for smart phone devices. Therefore, many researchers are focusing on methods that can be used to strengthen ion-exchange glass. However, research on how the improved strength can be maintained under thermal environment of device manufacturing is still insufficient. We tested the degradation of the characteristics of ion-exchange soda-lime glass samples, including their surface compressive stress characteristics, the depth of the ion-exchange layer (DOL), flexural strength, hardness, and modulus of rupture (MOR) values. Degradation of the characteristics of the ion-exchange glass samples occurred when they were heat-treated at a temperature that exceeded $350^{\circ}C$.

• 전자공학회논문지 IE
• /
• 제47권1호
• /
• pp.1-5
• /
• 2010

본 논문은 SOI 저장음 종폭기에서 게이트구조가 핫캐리어에 의한 성능저하에 미치는 영향융 조사하였다. 회로 시뮬레이션은 H-게이트와 T-게이트를 가지는 SOI MOSFET에서 측정된 S-파라미터와 Agilent사의 ADS를 사용하여 스트레스 전후의 H-게이트와 T-게이트 저잡음 증폭기의 성능을 비교하였다. 또한 저잡음 증폭기의 장치 열화와 성능 열화 사이의 관계뿐만 아니라 임피던스 매칭(S11), 잡음 지수와 이득에 관한 저잡음 증폭기의 성능 지수 등을 논의하였다.

• 한국전기전자재료학회논문지
• /
• 제37권3호
• /
• pp.309-313
• /
• 2024

The key to determining the lifetime of OLED device is how much brightness can be maintained. It can be said that there are internal and external causes for the degradation of OLED devices. The most important cause of internal degradation is bonding and degradation in the excited state due to the electrochemical instability of organic materials. The structure of OLED modeled in this paper consists of a cathode layer, electron injection layer (EIL), electron transport layer (ETL), light emission layer, hole transport layer (HTL), hole injection layer (HIL), and anode layer on a glass substrate from top to bottom. It was confirmed that the temperature generated in OLED was distributed around the maximum of 343.15 K centered on the emission layer. It can be seen that the heat distribution generated in the presented OLED structure has an asymmetrically high temperature distribution toward the cathode, which is believed to be because the sizes of the cathode and positive electrode are asymmetric. Therefore, when designing OLED, it is believed that designing the structures of the cathode and anode electrodes as symmetrically as possible can ensure uniform heat distribution, maintain uniform luminance of OLED, and extend the lifetime. The thermal distribution of OLED was analyzed using the finite element method according to Comsol 5.2.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3626-3631
• /
• 2009

본 논문에서는 아날로그 회로에 사용되는 NMOSFET에 대한 Hot-Carrier 열화특성을 조사하였다. 여러 값을 갖는 게이트 전압으로 스트레스를 인가한 후, 소자의 파라미터 열화를 포화 영역에서 측정하였다. 스트레스 게이트 전압의 범위에 따라 계면 상태(interface state) 뿐 아니라 전자와 정공의 포획이 드레인 근처 게이트 산화막에서 확인되었다. 그리고 특히 낮은 게이트 전압의 포화영역에서는 정공의 포획이 많이 발생하였다. 이러한 전하들의 포획은 전달 컨덕턴스 ($g_m$) 및 출력 컨덕턴스 ($g_{ds}$)의 열화의 원인이 된다. 아날로그 동작 범위의 소자에서 파라미터 열화는 소자의 채널 길이에 매우 민감하게 반응한다. 채널길이가 짧을수록 정공 포획이 채널 전도도에 미치는 영향이 증가하게 되어 열화가 증가되었다. 이와 같이 아날로그 동작 조건 및 아날로그 소자의 구조에 따라 $g_m$ 및 $g_{ds}$의 변화가 발생하므로 원하는 전압 이득($A_V=g_m/g_{ds}$)을 얻기 위해서는 회로 설계시 이러한 요소들에 대한 고려가 필요하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.58-61
• /
• 2001

Metal-insulator-semiconductor (MIS) C-V properties with high dielectric AIN thin films showed no hysteresis and good interface properties. The dielectric constant of the AIN film calculated from the capacitance at the accumulation region in the capacitance-voltage(C-V) characteristics was about 8. The C-V characteristics of MFIS capacitor showed a hysteresis loop due to the ferroelectric nature of the LiNbO$_3$ thin films. Typical dielectric constant value of LiNbO$_3$ film of MFIS device was about 23. The memory window width was about 1.2V at the gate voltage of $\pm$5 V ranges. Typical gate leakage current density of the MFIS structure was the order of 10$^{-9}$ A/cm$^2$ at the range of within $\pm$500 kV/cm. The ferroelectric capacitors showed no polarization degradation up to about 10$^{11}$ switching cycles when subjected to symmetric bipolar voltage pulse(peak-to-peak 8V, 50% duty cycle) in the 500kHz.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2335-2340
• /
• 2012

비냉각 방식의 검출기는 검출기 내부에 냉각기 기능을 하는 열전소자(TEC : Thermal Electric Cooler)를 탑재하여 냉각기의 기능을 대신하고 있다. 이 열전소자의 기능은 검출기의 기준온도를 제어하여 온도변화에 따른 영상화질의 저하를 방지하는 역할을 수행한다. 최근에는 이 열전소자를 삭제하여 크기, 가격을 줄일 수 있는 노력이 많이 연구되고 있다. 본 논문에서는 비냉각 형태의 적외선 검출기는 내부에 열전소자가 없는 검출기를 보다 효과적으로 제어하여 영상의 화질저하를 최소화 하면서 크기를 최소화 하고 가격경쟁력을 높일 수 있는 효율적인 제어기법에 대해 실제 챔버를 활용한 시험결과를 제시하고자 한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.34-39
• /
• 2014

This paper discusses the 3-level charge pumping (CP) method in planar-type Silicon-Oxide-High-k-Oxide-Silicon (SOHOS) and Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) devices to find out the reason of the degradation of data retention properties. In the CP technique, pulses are applied to the gate of the MOSFET which alternately fill the traps with electrons and holes, thereby causing a recombination current Icp to flow in the substrate. The 3-level charge pumping method may be used to determine not only interface trap densities but also capture cross sections as a function of trap energy. By applying this method, SOHOS device found to have a higher interface trap density than SONOS device. Therefore, degradation of data retention characteristics is attributed to the many interface trap sites.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.15-19
• /
• 2010

In this paper, we discuss design considerations for an n-channel metal-oxide-semiconductor field-effect transistor (MOSFET) with a lateral asymmetric channel (LAC) doping profile. We employed a $0.35\;{\mu}m$ standard complementary MOSFET process for fabrication of the devices. The gates to the LAC doping overlap lengths were 0.5, 1.0, and $1.5\;{\mu}m$. The drain current ($I_{ON}$), transconductance ($g_m$), substrate current ($i_{SUB}$), drain to source leakage current ($i_{OFF}$), and channel-hot-electron (CHE) reliability characteristics were taken into account for optimum device design. The LAC devices with shorter overlap lengths demonstrated improved $I_{ON}$ and $g_m$ characteristics. On the other hand, the LAC devices with longer overlap lengths demonstrated improved CHE degradation and $I_{OFF}$ characteristics.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.569-574
• /
• 2007

In this paper, the reliability (NBTI degradation: ${\Delta}V_{th}$) and device characteristic of nano-scale PMOSFET with plasma nitrided oxide (PNO) is characterized in depth by comparing those with thermally nitrided oxide (TNO). PNO case shows the reduction of gate leakage current and interface state density compared to TNO with no change of the $I_{D.sat}\;vs.\;I_{OFF}$ characteristics. Gate oxide capacitance (Cox) of PNO is larger than TNO and it increases as the N concentration increases in PNO. PNO also shows the improvement of NBTI characteristics because the nitrogen peak layer is located near the $Poly/SiO_2$ interface. However, if the nitrogen concentration in PNO oxide increases, threshold voltage degradation $({\Delta}V_{th})$ becomes more degraded by NBT stress due to the enhanced generation of the fixed oxide charges.