• Steel and Composite Structures
• /
• v.32 no.1
• /
• pp.79-90
• /
• 2019

This study introduces new connections that connect the beam to the column with slit dampers. Plastic deformations and damages concentrate on slit dampers. The slit dampers prevent plastic damages of column, beam, welds and panel zone and act as fuses. The slit dampers were prepared with IPE profiles that had some holes in the webs. In this paper, two experimental specimens were made. In first specimen (SDC1), just one slit damper connected the beam to the column and one IPE profile with no holes connected the bottom flange of the beam to the column. The second specimen (SDC2) had two similar dampers which connected the top and bottom flange of the beam to the column. Cyclic loading was applied on Specimens. The cyclic displacements conditions continued until 0.06 radian rotation of connection. The experimental observations showed that the bending moment of specimen SDC2 increased until 0.04 story drift. In specimen SDC1, the bending moment decreases after 0.03 story drift. Test results indicate the high performance of the proposed connection. Based on the results, the specimen with two slit damper (SDC2) has higher seismic performance and dissipates more energy in loading process than specimen SDC1. Theoretical formulas were extended for the proposed connections. Numerical studies have been done by ABAQUS software. The theoretical and numerical results had good agreements with the experimental data. Based on the experimental and numerical investigations, the high ductility of connection is obtained from plastic damages of slit dampers. The most flexural moment of specimen SDC1 occurred at 3% story drift and this value was 1.4 times the plastic moment of the beam section. This parameter for SDC2 was 1.73 times the plastic moment of the beam section and occurred at 4% story drift. The dissipated energy ratio of SDC2 to SDC1 is equal to 1.51.

• Carbon letters
• /
• v.11 no.2
• /
• pp.127-130
• /
• 2010

Boron doped fullerene $C_{60}$ ($B:C_{60}$) films were prepared by the thermal evaporation of $C_{60}$ powder using argon plasma treatment. The morphology and structural characteristics of the thin films were investigated by scanning electron microscope (SEM), Fourier transform infra-red spectroscopy (FTIR) and x-ray photo electron spectroscopy (XPS). The electrochemical application of the boron doped fullerene film as a coating layer for silicon anodes in lithium ion batteries was also investigated. Cyclic voltammetry (CV) measurements were applied to the $B:C_{60}$ coated silicon electrodes at a scan rate of $0.05\;mVs^{-1}$. The CV results show that the $B:C_{60}$ coating layer act as a passivation layer with respect to the insertion and extraction of lithium ions into the silicon film electrode.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.699-704
• /
• 2002

We characterized nanoelectrode arrays prepared from self-assembled monolayers (SAMs) by adsorption from a solution containing thiolated $\beta$-cyclodextrin ($\beta$-CD) and n-alkanethiol on the gold electrode surface, using electrochemical methods. While the framework, the n-hexadecanethiol SAM, effectively blocked electron transfer between the electrode surface and solution-phase redox probe molecules, the $\beta$-CD cavities isolated in the forests of n-hexadecanethiol molecules were shown to act as an ultramicroelectrode array. The shapes of cyclic voltammograms of probe molecules were related to the number densities of $\beta$-CD molecules within the monolayer films. Probe molecules that have the correct combination of physical and chemical characteristics were shown to effectively penetrate the framework through the $\beta$-CD pores and exchange electrons with the electrode surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.137-137
• /
• 2013

The most stable adsorption structures and their corresponding energies of 4-pyridone, 4-hydroxypyridine, 2-pyridone and 2-hydroxypyridine have been investigated by Density Functional Theory (DFT) calculation method and high-resolution photoemission spectroscopy (HRPES). We confirmed that between the two reaction centers of 4- and 2-pyridone, only O atom of carbonyl functional group can act as a Lewis base and thus, O dative bonding structure is the most stable. On the other hand, we clarified that both the two reaction centers (the cyclic N atom and the O atom of hydroxyl functional group) of 4- and 2-hydroxypyridine (tautomers of 4- and 2-pyridone) can successfully function as a Lewis base. Through the interpretation of the N 1s and O 1s core level spectra obtained using HRPES, we could confirm the electronic structures and bonding configurations of these molecules with a coverage dependence on the Ge(100) surface.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.456-460
• /
• 1994

Catalytic effects of various cobalt phenylporphyrin compounds on the reduction of thionyl chloride at glassy carbon electrode have been evaluated by determining kinetic parameters with cyclic voltammetric techniques. The concentration of catalysts and the electrode immersion time have been found to affect the catalyst performance strongly, leading to a conclusion that the compounds are first adsorbed at the electrode surface and act as catalysts. Significant improvements in cell performance have been noted in terms of both exchange rate constants of up to 3 times and current densities of up to 150% at glassy carbon electrode.

• Communications of the Korean Mathematical Society
• /
• v.37 no.2
• /
• pp.347-358
• /
• 2022

In this paper, we first introduce the notions of superfluous and coessential subacts. Then hollow and co-uniform S-acts are defined as the acts that all proper subacts are superfluous and coessential, respectively. Also it is indicated that the class of hollow S-acts is properly between two classes of indecomposable and locally cyclic S-acts. Moreover, using the notion of radical of an S-act as the intersection of all maximal subacts, the relations between hollow and local S-acts are investigated. Ultimately, the notion of a supplement of a subact is defined to characterize the union of hollow S-acts.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.3
• /
• pp.220-228
• /
• 2018

This study introduced a carbon-free electrode for $Li-O_2$ cells with the aim of suppressing the side reactions activated by carbon material. Micro-particles of poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, were used as the base material for the air electrode of $Li-O_2$cells. The PEDOT micro-particles were treated with $H_2SO_4$ to improve their electronic conductivity, and LiBr and CsBr were used as the redox mediators to facilitate the dissociation of there action products in the electrode and reduce the over-potential of the $Li-O_2$ cells. The capacity of the electrode employing PEDOT micro-particles was significantly enhanced via $H_2SO_4$ treatment, which is attributed to the increased electronic conductivity. The considerable capacity enhancement and relatively low over-potential of the electrode employing $H_2SO_4$-treated PEDOT micro-particles indicate that the treated PEDOT micro-particles can act as reaction sites and provide storage space for the reaction products. The cyclic performance of the electrode employing $H_2SO_4$-treated PEDOT micro-particles was superior to that of a carbon electrode. The results of the Fourier-transform infrared spectroscopic analysis showed that the accumulation of residual reaction products during cycling was significantly reduced by introducing the carbon-free electrode based on $H_2SO_4$-treated PEDOT micro-particles, compared with that of the carbon electrode. The cycle life was improved owing to the effect of the redox mediators. The refore, the use of the carbon -free electrode combined with redox mediators could realize excellent cyclic performance and low over-potential simultaneously.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.4
• /
• pp.377-386
• /
• 2021

The Li-rich oxides are promising cathode materials due to their high energy density. However, characteristics such as low rate capability, unstable cyclic performance, and rapid capacity fading during cycling prevent their commercialization. These characteristics are mainly attributed to the phase instability of the host structure and undesirable side reactions at the cathode/electrolyte interface. To suppress the phase transition during cycling and interfacial side reactions with the reactive electrolyte, K (potassium) doping and Nb oxide coating were simultaneously introduced to a Li-rich oxide (Li_1.2Ni_0.13Co_0.13Mn_0.54O₂). The capacity and rate capability of the Li-rich oxide were significantly enhanced by K doping. Considering the X-ray diffraction (XRD) analysis, the interslab thickness of LiO₂ increased and cation mixing decreased due to K doping, which facilitated Li migration during cycling and resulted in enhanced capacity and rate capability. The K-doped Li-rich oxide also exhibited considerably improved cyclic performance, probably because the large K⁺ ions disturb the migration of the transition metals causing the phase transition and act as a pillar stabilizing the host structure during cycling. The Nb oxide coating also considerably enhanced the capacity and rate capability of the samples, indicating that the undesirable interfacial layer formed from the side reaction was a major resistance factor that reduced the capacity of the cathode. This result confirms that the introduction of K doping and Nb oxide coating is an effective approach to enhance the electrochemical performance of Li-rich oxides.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.2
• /
• pp.81-87
• /
• 2022

In this study, the effect of alkylamine on copper electroplating was analyzed using cyclic voltammetry. When water-soluble alkylamines were added to the plating solution, the reduction reaction of Cu²⁺ was inhibited. The inhibition effect of 1,12-diaminododecane has been investigated at various concentrations and conditions of the plating solution. 1,12-diaminododecane was protonated in the acidic plating solution, and therefore, it did not act as a complexing agent for Cu²⁺. Accordingly, it was confirmed that the inhibiton effect of 1,12-diaminododecane was attributed to adsorption on the Cu surface. The adsorption of 1,12-diaminododecane exhibits two characteristics: (i) protonation and subsequent electrostatic attraction with anions pre-adsorbed on Cu surface, and (ii) direct adsorption on Cu surface via amine functional group. The adsorbed 1,12-diaminododecane caused three-dimensional growth and grain refining, as well as the inhibition effect, during Cu electroplating.

• Animal cells and systems
• /
• v.3 no.2
• /
• pp.103-113
• /
• 1999

Many in-depth reviews related to regulations of prolactin secretion are available. We will, therefore, focus on controversial aspects using personal opinion in this review. The neuroendocrine control of prolactin secretion from the anterior pituitary gland involves multiple factors including prolactin-release inhibiting factor (PIF) and prolactin releasing factor (PRF). The PIF exerts a tonic inhibitory control in the physiological conditions. The PIF should be able to effectively inhibit prolactin release or a lifetime, but the inhibitory action of dopamine cannot be sustained for a long period of time. Perifusion of a high concentration of dopamine (l ,000 nM) could not sustain inhibitory action on prolactin release but when a small amount of ascorbic acid (0.1 mM) is added in a low concentration of dopamine (3 nM) solution, prolactin release was inhibited for a long period. Ascorbate is essential for dopamine action to inhibit prolactin release. We have, therefore, concluded that the PIF is dopamine plus ascorbate. The major transduction system for dopamine to inhibit prolactin release is the adenylyl cyclase system. Dopamine decreases cyclic AMP concentration by inhibiting adenylyl cyclase, and cyclic AMP stimulates prolactin release. However, the inhibitory mechanism of dopamine on prolactin release is much more complex than simple inhibition of CAMP production. The dopamine not only inhibits cyclic AMP synthesis but also inhibits prolactin release by acting on a link(s) after the CAMP event in a chain reaction for inhibiting prolactin release. Low concentrations of dopamine stimulate prolactin release. Lactotropes are made of several different subtypes of cells and several different dopamine receptors are found in pituitary. The inhibitory and stimulatory actions induced by dopamine can be generated by different subtype of receptors. The GH$_4$ZR$_7$ cells express only the short isoform (D$_{2s}$) of the dopamine receptor, as a result of transfecting the D$_{2s}$ receptors into GH$_4$C$_1$ cells which do not express any dopamine receptors. When dopamine stimulates or inhibits prolactin release in GH$_4$ZR$_7$ cells, it is clear that the dopamine should act on dopamine D$_{2s}$ receptors since there is no other dopamine receptor in the GH$_4$ZR$_7$. Dopamine is able to stimulate prolactin release in a relatively low concentration while it inhibits in a high concentration in GH$_4$ZR$_7$. These observations indicate that the dopamine D$_2$ receptor can activate stimulatory and/or inhibitory transduction system depending upon dopamine concentrations.