• Title/Summary/Keyword: current driving

Search Result 1,389, Processing Time 0.032 seconds

Evaluation of Electrohydraulic Left Ventricular Assist Device through Animal Experiment (동물실험을 통한 전기유압식 좌심실 보조장치의 성능 평가)

  • Choi, J.S.;Chung, C.I.;Choi, W.W.;Park, S.K.;Jo, Y.H.;Om, K.S.;Lee, J.J.;Won, Y.S.;Kim, H.C.;Kim, W.G.;Min, B.G.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1996 no.05
    • /
    • pp.84-87
    • /
    • 1996
  • We have been developed electrohydraulic left ventricular assist device and done various in vivo evaluation on the device. Through the in vivo experiment conducted from Jan. 23, 1996 to Feb. 8, we could have experience of long-term evaluation fur the first time. The sheep used in this experiment had survived for 16 days. We used new actuator with reduced size and linear motion guide replacing oil box and ball bearings. Also, we used improved blood chamber with reduced size, reduced weight facilitating fixing the chamber to animal's body, and polymer sac having improved folding pattern. Against suction problem, we used absolute pressure limiter only. Motor current for driving this new actuator was not much higher than older one. Effective stroke volume was about 48 cc. Thrombosis was found around top area and peripheral boundary of the sac and valves. There was no sign of damage from suction problem in the atrium observed at autopsy. Main cause of death was presumed to be progressive formation of thrombosis in the cannulae. In this paper, the results of this experiment are documented.

  • PDF

Transport Demand Management in Developing Countries and Climate Change (개발도상국의 교통수요관리와 기후변화)

  • Lee, Shin
    • Journal of the Society of Disaster Information
    • /
    • v.14 no.3
    • /
    • pp.288-295
    • /
    • 2018
  • Purpose: The paper aims to compare the effectiveness of the two types of transport demand management measures, namely pull measures and push measures. Method: Case studies of two metropolitan areas in the developing world assess the extent to which increases in fuel prices can contribute to reducing automobile use and increasing the public transport use and the potential of urban rail transit to cause mode shift from automobiles. Within the case studies, a stated response survey of current car users has been conducted for Cairo and an on-line survey of rail transit users in Algiers. Results: There was a major proportion of car drivers who intend to switch to public transport, depending on the range of fuel prices in Cairo and a considerable proportion of rail users who have switched from automobiles resulting in a measurable reduction in CO2 emissions in Algiers. Conclusion: Investments in urban rail can be highly effective where there are demands for better public transport, but this type of pull measures can be much more effective if combined with push measures which significantly raise driving costs.

The Development of a beam profile monitoring system for improving the beam output characteristics (빔 출력 특성 개선을 위한 빔 프로파일 모니터링 시스템 개발)

  • An, Young-jun;Hur, Min-goo;Yang, Seung-dae;Shin, Dae-seob;Lee, Dong-hoon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.11
    • /
    • pp.2689-2696
    • /
    • 2015
  • Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.

Comprehensive Evaluation of Freeway Surface Conditions based on User's Satisfaction (이용자 만족도를 고려한 고속도로 노면상태 종합평가에 관한 연구)

  • Son, Young-Tae;Lee, Jin-Kak;Lee, Shin-Ra;Jung, Chul-Gie
    • International Journal of Highway Engineering
    • /
    • v.12 no.3
    • /
    • pp.37-47
    • /
    • 2010
  • This research is aimed at comprehensively evaluating the condition of a road surface of a highway in satisfaction of its users. This research conducted an overall evaluation of a road surface condition by adding qualitative data, or a driver's satisfaction to the existing quantitative elements, whereas the existing research put its focus on a correlation analysis with quantitative factors and qualitative factors through a statistical method. As for an evaluation method, this research conducted an overall evaluation by using Grey System Theory which makes possible an integrated evaluation. The analyzed results make it possible to diagnose the current conditions of each section of object roads and to predict the potentially changeable conditions for the time to come. In addition, these analyzed results could hopefully be applied to the maintenance of freeways through diverse methods. It is hoped that the evaluation of a road surface condition of a highway in satisfaction of its user could be helpful to keeping up the satisfaction of a driver and passenger on the highway by more than a certain level. In addition, the analyzed data on the influence of data value observed by comprehensively evaluating a variety of elements could be used as a secondary means of the decision-making process in relation to road maintenance. On top of that, it could be used as a means of improving road maintenance system and offering the improved driving environment of the highway.

Arguments and Some Issues to be Considered for Building the New Administration Capital City in Korea (신 행정수도 건설의 논거와 과제)

  • 안성호
    • Journal of the Korean Geographical Society
    • /
    • v.38 no.2
    • /
    • pp.298-311
    • /
    • 2003
  • Building the new administration capital city, one of presidential candidate Moo-Hyun Rho's election pledges, is now listed as a priority national policy agenda of the Participation Government. However, so many people's negative attitudes ranging from cynical skepticism to firm objections against the national policy agenda may threaten its smooth policy actualization. At this juncture, this paper attempts to present persuasive arguments and discuss some critical issues to be considered for building the new administration capital city successfully. The paper begins with taking a look at the current state of hyper-concentration of Seoul agglomeration area and its harmful effects, paints a vision of 'an evenly developed country as a whole' via illustrating the vision from the Swiss case, and reviews the performance of the precedent governments' reform measures for rectifying the hyper-concentration of Seoul agglomeration area. And then, the paper argues for building the new administration capital city as a potent solution to the problem of excessive concentration of activities in Seoul agglomeration area, as well as a driving force to spur the government to realize the Participation Government' enthusiastic vision: 'a decentralized and evenly developed country as a whole' and 'the hub country in the Northeast Asia'. In addition, the paper discusses the location of the new administration capital city in connection with the forthcoming national unification. Lastly, the paper deals with the important issues such as the procedure of people's approval, the population size and legal status of the new administration capital city, the relationship between building the new administration capital city and decentralization reform, etc.

A Charge Pump Design with Internal Pumping Capacitor for TFT-LCD Driver IC (내장형 펌핑 커패시터를 사용한 TFT-LCD 구동 IC용 전하펌프 설계)

  • Lim, Gyu-Ho;Song, Sung-Young;Park, Jeong-Hun;Li, Long-Zhen;Lee, Cheon-Hyo;Lee, Tae-Yeong;Cho, Gyu-Sam;Park, Mu-Hun;Ha, Pan-Bong;Kim, Young-Hee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.11 no.10
    • /
    • pp.1899-1909
    • /
    • 2007
  • A cross-coupled charge pump with internal pumping capacitor, witch is advantages from a point of minimizing TFT-LCD driver IC module, is newly proposed in this paper. By using a NMOS and a PMOS diode connected to boosting node from VIN node, the pumping node is precharged to the same value each pumping node at start pumping operation. Since the lust-stage charge pump is designed differently from the other stage pumps, a back current of pumped charge from charge pumping node to input stage is prevented. As a pumping clock driver is located the font side of pumping capacitor, the driving capacity is improved by reducing a voltage drop of the pumping clock line from parasitic resistor. Finally, a layout area is decreased more compared with conventional cross-coupled charge pump by using a stack-MIM capacitors. A proposed charge pump for TFT-LCD driver IC is designed with $0.13{\mu}m$ triple-well DDI process, fabricated, and tested.

Review of Safety Measures through Analysis of Accidents on the Vehicle-mounted MEWP(mobile elevated work platforms) (차량 탑재형 고소작업대의 사고분석을 통한 안전대책 고찰)

  • Lee, Junho
    • Journal of the Korea Institute of Construction Safety
    • /
    • v.1 no.1
    • /
    • pp.47-56
    • /
    • 2018
  • In this paper, we analyze various cases of accidents caused by vehicle-mounted MEWPs(mobile elevated work platforms) which are most widely used for the high position level works, review the safety improvement measures for each of them, and propose basic data for the revision of related laws. The accidents by MEWPs were caused by the high level of works, which lead to fatal personnel accidents, so the measures for safety must be thoroughly carried out and the obligatory regulations by the related laws must be strictly observed. In this paper, we classify the cases of accidents at the workshop as 4 representative types and propose measures and remedies for them. According to the current regulations, it is possible to prepare for the accidents such as the wire rope breakage by switching to the all-chain drive method which does not have a daily use time limit instead of the wire rope drive method which is widely used at present. Also, it is suggested to add the daily use timetable to the nameplate attachment duty item according to the driving class.

A Study on the Characteristics and Policy Demand of the Unmanned Vehicle Industry in Gyeonggi-do (경기도 무인이동체 산업 특성과 정책수요)

  • Kim, Myung Jin
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.24 no.3
    • /
    • pp.283-299
    • /
    • 2021
  • As the intelligent revolution triggered by digital technology, unmanned vehicles such as self-driving cars, robots, and drones appeared, which brought about innovative changes in the industry. Gyeonggi Local government has established both an ordinance and a basic plan regarding unmanned vehicles. It is time to prepare a data-based policy by understanding the current state of the unmanned vehicle industry in the province. As a result of the survey, the unmanned vehicle industry in Gyeonggi Province is 25% of the nationwide, and more than 88% is concentrated in the southern part of Gyeonggi Province. The land sector such as the robot and autonomous vehicles are focused on 71.4% and the aviation sector such as drones are 26.7%. However, unmanned vehicle companies in Gyeonggi-do are mostly small-sized businesses with less than 10 years of experience and are in the stage of introduction and growth level. They have a plan to improve technology through continuous R&D by hiring human resources. Therefore, Gyeonggi-do needs to consider policy support for sustainable growth of start-up and small enterprises and for fostering professional manpower and technical skills as well as for establishing an unmanned vehicle industry network to create, share, and spread knowledge.

ICT Trend Analysis Based on Research Papers and Patents (논문 및 특허 기반의 ICT 동향 분석 연구)

  • Son, Yeonbin;Kim, Solha;Choi, Yerim
    • Journal of the Korea Convergence Society
    • /
    • v.12 no.12
    • /
    • pp.1-18
    • /
    • 2021
  • ICT is the main driving force of Korea's economic growth. Korea has the world's best ICT competitiveness, and several policies are being implemented to maintain it. However, for successful policy implementation, it is crucial to understand ICT trends accurately. Therefore, this study analyzes the trends of 18 core technologies in the ICT field. In particular, the degree of scientific development and commercialization by technology are investigated through research paper analysis and patent analysis, respectively. Then, the trends shown by document type are compared based on the two analysis results. As a result, artificial intelligence and virtual reality are at the stage where commercialization is actively taking place after scientific development, and at the same time, since research is being conducted, it is expected to develop continuously. On the other hand, quantum computer and implantable device are in the basic research stage. It is necessary to understand the current research status and determine the direction of future support. The results of the ICT trend analysis conducted in this study can be used as a criterion for determining the future direction of Korean policy.

Analysis of Elderly Driver's Visual Function (고령 운전자의 시각적 기능 분석에 관한 연구)

  • Kim, Jung Bok;Hwang, Jeong Hee;Chu, Byoung Sun
    • The Korean Journal of Vision Science
    • /
    • v.20 no.4
    • /
    • pp.505-511
    • /
    • 2018
  • Purpose : This study investigated the visual functions of drivers aged over 65 year olds and drivers aged 50~65 year olds. In addition, difference of visual functions between professional drivers and normal drivers were investigated. Methods : Forty Driver aged over 65 year olds and 67 drivers aged less than 67 year olds were participated. All participants had more than 5 years of driving experiences and had no ocular pathology. Demographic data(gender, job, age, body condition) and visual functions such as contrast sensitivity(CS), stereopsis, glare recovery time and discomfort glare index were measured. Results : Constrast sensivity under photopic condition was higher with bus driver group. In addition, difference of CS at 12cpd and 18cpd were signifcantly different between normal drivers(1.57) and bus drivers(1.70) (p<0.05). There was no significant difference for glare recovery time, despite of trend of longer recovery time with age. Discomfort glare index was significantly different that normal drivers with more than 65 year olds had 3, taxi and truck driver presented almost 5 index score (p<0.05). Conclusion : Analysis of visual function of elderly drivers, it was confirmed that their visual functions decreased with age. Therefore, visual function tests such as CS, discomfort glare index and stereopsis in addition to current available test may need to be considered for drivers aged over 65.