• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1037-1040
• /
• 1998

In this paper, current conveyor building block is introduced and CMOS realization of this block is given. The input-impedance characteristics, current-transfer characteristics and voltage-transfer characteristics of this proposed current conveyor circuit are given. This characteristics of the CMOS current conveyor circuit is useful of the various applications which require a wideband. Using the Spice tool, the circuit is designed and the characteristics of CMOS current conveyor circuit is considered. Finally, refer to the simple applications.

• ETRI Journal
• /
• 제28권4호
• /
• pp.495-501
• /
• 2006

This paper presents a new CMOS fully-differential second-generation current conveyor (FDCCII). The proposed FDCCII is based on a fully-differential difference transconductor as an input stage and two class AB output stages. Besides the proposed FDCCII circuit operating at a supply voltage of ${\pm}1.5\;V$, it has a total standby current of $380\;{\mu}A$. The applications of the FDCCII to realize a variable gain amplifier, fully-differential integrator, and fully-differential second-order bandpass filter are given. The proposed FDCII and its applications are simulated using CMOS $0.35\;{\mu}m$ technology.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.566-569
• /
• 2010

This paper describes the sinusoidal, pulse, triangular oscillator using second generation current conveyor. To obtain the sinusoidal waveform the circuit blocks are constructed by using all pass filter and integrator. The pulse and the triangular waveforms are obtained from the output of sinusoidal oscillator. The peak-to-peak voltages of sinusoidal and triangular waveforms can be easily controlled by the dc offset voltage. Also the output frequency of the oscillator can be controlled by varying passive elements. The designed circuit is verified by HSPICE simulation.

• 한국정보통신학회논문지
• /
• 제15권5호
• /
• pp.1119-1124
• /
• 2011

전류 컨베이어 회로의 동작은 연산증폭기와 유사하며, 우수한 선형성과 안정성을 가지고 있다. 이 논문에서는 전류 컨베이어 회로를 이용하여 주파수 신호를 아날로그 전압 신호로 변환하는 회로를 설계하였다. 회로는 공급전압 5volts에서 동작하도록 설계하였으며, HSPICE 시뮬레이션을 통하여 결과를 분석하였다. 회로의 동작 범위는 4kHz 이상 200kHz 이하의 주파수에서 출력 전압의 에러는 +2.5% ~ -1.3% 이내 이었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.80.1-80
• /
• 2002

In this article, an alternative analog multiplier circuit, using the translinear second-generation current conveyors with the external resistors. The realization method makes use of the inherited translinear loop of the current conveyor offering the positive-supply current that provides in the quartersquare algebraic identity. The proposed circuit operates in voltage mode and it achieves a high accuracy. The PSPICE simulation results confirm that the performances of the proposed multiplier circuit, such as dynamic range and accuracy, are agreed with the theoretical results.

• 한국정보통신학회논문지
• /
• 제15권4호
• /
• pp.891-896
• /
• 2011

이 논문에서는 전류 컨베이어 회로를 이용하여 입력 전압의 차에 비례하는 주파수 신호를 생성하는 회로를 설계하였다. 설계된 회로는 HSPICE를 이용하여 회로의 동작을 분석하였으며, 입력 전압 차는 수V에서 수mV 단위까지 변화시키면서 출력 주파수를 시뮬레이션하였다. 회로의 시뮬레이션 결과 이론적인 계산값과 비교하였을 때 에러는 -1.9%에서 +1.8% 이내였다.

• ETRI Journal
• /
• 제27권4호
• /
• pp.427-432
• /
• 2005

In this study, we present a new topology for realizing a grounded inductor employing only a single current conveyor, called a negative-type modified inverting second-generation current conveyor (MICCII-), and a minimum number of passive components, two resistors, and one capacitor. The non-ideality effects of the MICCII- on a simulated inductor are investigated. To demonstrate the performance of the presented inductance simulator, we use it to construct a third order Butterworth high-pass filter and a parallel resonant circuit. Simulation results are given to confirm the theoretical analysis.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.971-974
• /
• 1999

A offset compensated class A bipolar second-generation current conveyor (CCII) for high-accuracy current-mode signal processing was proposed. The CCII adopts two diode-connection transistor between voltage input and voltage output to reduce offset voltage. Experiments show that the proposed CCII has offset voltage of 0.05 ㎷, input impedance of 2 Ω and the 3-㏈ cutoff frequency of 30 MHz when used a voltage amplifier. The power dissipation is 6 ㎷.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.677-688
• /
• 2012

The vibratory conveyors with electromagnetic drive are used for performing gravimetric flow of granular materials in processing industry. By realizing free vibrations of variable intensity and frequency over a wide range through application of the electromagnetic actuator, suitable power converter, and the corresponding controller, continuous conveyance of granular materials have been provided for various operating conditions. Standard power output stages intended for control of vibratory conveyance using thyristors and triacs. Phase angle control can only accomplish tuning of amplitude oscillations, but oscillation frequency cannot be adjusted by these converters. Application of current controlled transistor converters enables accomplishing the amplitude and/or frequency control. Their use implies the excitation of a vibratory conveyor independent of the supply network frequency. In addition, the frequency control ensures operation in the region of mechanical resonance. Operation in this region is favourable from the energy point of view, since it requires minimal energy consumption. The paper presents a possible solution and advantages of the amplitude-frequency control of vibratory conveyors by means of a current controlled power converter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.237-240
• /
• 2005

A novel current mode high Q bandpass filter with electronically tuable values of Q based on second generation current controlled conveyor CCCIIs is presented. The circuit offers the advantages of using a few passive elements. The center frequency and pole-Q can be independently adjusted by via dc bias current of CCCIIs, It is shown from SPICE simulation that the results agree well with theoretical analysis