• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.327-332
• /
• 2006

In airborne gravimetry, there are two data streams. One is the specific force measured by an air/sea gravimeter or accelerometers, the other is kinematic acceleration measured by DGPS. And the difference of them provides the gravity disturbance information. To satisfy the requirement of most applications, an accuracy of 1mGal $(1mCal=10^{-5}m/s^{2})$ with a spatial resolution of 1km is the aim of current airborne gravimetry. There are two different methods to derive the kinematic acceleration. The generally used method is to differentiate the position twice, and the position can be calculated by commercial DGPS software. The main defect of this method is that integer ambiguities need to be fixed to get the precise position solution, but it's not a trivial thing for long base line. And to fix integer ambiguities, the noisier iono-free measurement is used. When differentiation is applied, noise is amplified and will influence the accuracy of acceleration. The other method is to get carrier phase acceleration by differentiate the carrier phase first, and then using the acceleration of GPS satellite to derive the vehicle acceleration. The main advantages include that fixing integer ambiguities is not needed anymore, position can be relaxed to about 10 meters, and smoother acceleration can be got since iono-free measurement is not needed. In some literatures, it's considered that the dynamic performance of the second method is inferior to that of the first. Through analysis, it is found that the performance degradation in dynamic environment results from the simplification of the GPS carrier phase observable model. And an iterative algorithm is presented to compensate the model error. Using a dynamic GPS data from an aeromagnetic survey, the importance of this compensation is showed at last.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.319-327
• /
• 2008

The demand of a three phase PWM inverter for the purpose of power control or grid-connecting is increasing. This inverter is connected to a grid through an L-filter or LCL-filter to reduce the harmonics caused by switching. An LCL-filter can reduce the harmonic of a low switching frequency and generate a satisfactory level of grid side current with a relatively low-inductance than an L-filter. But the additional poles caused by the LC part affects a stability problem due to induced resonance of the system. This paper presents a compensation method using a power theory to improve performance, the designed LCL-filter system and to reduce the stability problems caused by resonance. The effectiveness of the proposed algorithm is verified by simulations and experiments.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.104-113
• /
• 2008

Due to the increasing needs of land supply, green space has been continuously encroached and resulted considerable naturality deterioration in Korea. In order to overcome the problem, it is necessary to introduce a integrated system for managing the quantitative and qualitative aspects of green space. With this regard, this study is to derive the feasibility for the adoption of the 'no net loss of green' policy to Korea from German and Japanese experiences. In Germany, natural resources are protected and inevitable damages were compensated through the adoption of 'interference regulation'. In Japanese case, future green space and artificial green foundation should be specified on the green basic plan which pursuit the improvement of naturality. In order to introduce the 'no net loss of green' policy to Korea, not only awareness raising on integrated green management system but also amendment of related regulations are needed. In detail, restoration and recovery on the damaged nature should be clearly elucidated and indicators to evaluate the current naturality and calculation methods for the restoration should be developed. Should this integrated green management system introduced, deterioration of naturality by development activities could be minimized thorough the adoption of land development permission criteria and green space management methodologies.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.357-362
• /
• 2017

Among the lithium metal oxides for asymmetric hybrid supercapacitor, $Li_4Ti_5O_{12}(LTO)$ is an emerging electrode material as zero-stain material in volume change during the with the charging and discharging processes. The pulverized LTO powder was observed to show the enhanced capacity from 120 mAh/g to 156 mAh/g at C-rate (10, 100 C). Hybrid supercapacitor module(48V, 416F) was fabricated using an asymmetric hybrid capacitor with a capacitance of 7500F. As a result of the measurement of C-rate characteristics, the module shows that the discharge time is drastically reduced at more than 50C, and the ESR and voltage drop characteristics are increased. The energy density and power density were reduced under high C-rate conditions. When designing asymmetric hybrid supercapacitor module, the C-rate and ESR should be considered As a result of measuring the 5 kw UPS, it was discharged at the current of 116A~170A during the discharge in the voltage range of 48V~30V, and the compensation time at discharge was measured to be about 33.2s. Experimental results show that it can be applied to applications related to stabilization of power quality by applying hybrid supercapacitor module.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.5
• /
• pp.1189-1199
• /
• 2017

With the rapid increase in mobile device users, there are many cyber attacks using SMS messages to infect the mobile device. The monetary demage from those attacks are also increasing. Since those demage are generally related to mobile micropayement systems, we study the details of the incidents on smishing and mobile micropayment. We have identified several limitations of current regulations and laws of them. Thus, we propose new regulations and laws to reduce the financial demage from simishing and to strengthen the security and responsibility of the mobile network operator, payment gateway, and content providers who are participating in the structure of a mobile micropayment systems, such as a regulation for information security evaluation system, several laws for compensation of financial demage within mobile micropayement system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.81-86
• /
• 2006

In this paper, a new process detection circuit is proposed. The proposed process detection circuit compares a long channel MOS transistor (L > 0.4um) to a short channel MOS transistor which uses lowest feature size of the process. The circuit generates the differential current proportional to the deviation of carrier mobilities according to the process variation. This method keep the two transistor's drain voltage same by implementing the feedback using a high gain OPAMP. This paper also shows the new design of the simple high gam self-biased rail-to-rail OPAMP using a proposed self-biased super MOS composite circuit. The gain of designed OPAMP is measured over 100dB with $0.2{\sim}1.6V$ wide range CMR in single stage. Finally, the proposed process detection circuit is applied to a differential VCO and the VCO showed that the proposed process detection circuit compensates the process corners successfully and ensures the wide rage operation.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.7-14
• /
• 2003

Statistics shows that 80% of freeway users travel less than 50km, and only 8% of them do over 100km. It means that the freeway is used for commuting. As a result, the freeway is not used efficiently and social cost is high. The current toll system aims for the efficient usage of the freeway by restraining short-distance trips and inducing long-distance ones. Thus, policies such as minimum toll system and discount for long-distance trips have been carried out. However. these two policies take no account of demand management between the freeway and alternative roads. They merely consider the compensation for charge on users, so the assessment of discount rate and distinction of distance are not reasonable. Consequently, not only the effective demand management but also the evaluation of those policies has been difficult to be achieved. The objective of this paper is to analyze those problematic policies and to establish a reasonable and improved toll system. In addition, this study presents the methodology to minimize social cost, which can be achieved by reducing short trips and encouraging long ones on the freeway. A new methodology of freeway toll system is applied and the results are presented.

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.71-79
• /
• 2011

Since 2008 Korea's fire administration has recognized the importance of human resources by introducing a mentoring system for new employees. This mentoring program is helping new employees adapt to the organization quickly and effectively. In addition, prevention inspectors are improving their job ability and expertise by ensuring the mentoring system has been introduced and operated. However, the current operating and fire officials mentoring system has a variety of problems including lack of expertise on the part of the mentors, deficiency of the legal system, lack of mentoring for information and materials, and lack of compensation, and formal mentoring training for mentors. In this study, the fire officials' mentoring system analysis and previous studies on the fire officials' mentoring functions will be analyzed to determine its effect on job performance. Results of this study of fire officials' job ability show that the variables that affect the mentoring program include the role model, business achievement, teaching method, attitude, interest, and achievement.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.11-15
• /
• 2013

These days, the quality of goods is required to improve in the process of manufacturing the semiconductor through the short working hours and clean transportation. The non-contact transport device using magnetic levitation can be a solution in the manufacturing process. The non-contact transport device, using electromagnetic actuation, is the system that can actually transport them by only using attraction force from the electromagnetic source without authentic contact. Moreover, the system using electromagnetic force has a substantial number of benefits ranging from unrestricted design to unlimited expansion. Especially, the price is competitive. The non-contact transport device, using electromagnetic force, has another merits in controlling by giving the same amount of attraction force to ferromagnetic body. By controlling the currents given to coil, the operator is able to decide the direction of the transportation. In order to design the optimal system, we implemented five different things such as the presence of the links below the electromagnetic, the electromagnet changes due to coupling method, the change according to the thickness of the links below electromagnet, due to changes in between electromagnetic distance direction, and the size of the current. Through simulations and the optimum design, it seems to control easily and figure out the exact size of power. It might definitely be the non-contact transport that can sharply reduce tiny scratches and particles in the process of manufacturing the semiconductor.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.585-594
• /
• 2006

Due to the size limit, the voice coil motor (VCM) is adopted in most of the mobile phone camera to control auto-focus instead of step motor. The optical system using the VCM has the property that the focus values are varying even though the same current is induced. It means that an error of the lens position was taken placed due to the characteristics of the VCM. In this paper, a algorithm was proposed to compensate the lens position error using the step size and the search count of each stage. In the proposed algorithm -7 step middle searching stage is inserted the conventional searching algorithm for the fast auto-focus searching and the final searing step size was set to +1 for the precise focus control, respectively. In the experimental results, the focus values was found more fast in the proposed algorithm than the conventional. And more the image quality by the proposed algorithm was superior to that of the conventional.