• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.63-68
• /
• 2019

We investigated the effects of Al2O3 addition on (1-x)Li2B4O7-xAl2O3 (LBAO; x = 0, 0.005, 0.01, 0.05, 0.07, and 0.1) glasses. The glasses were synthesized by a conventional melt-quench method. Structural transformations of the LBAO glasses were assessed via X-ray diffraction analysis. Estimations of ΔT, KGS = (Tc-Tg)/(Tm-Tc), activation energy, and the Avrami parameter were performed using differential thermal analysis and differential scanning calorimetry. An interpretation of non-isothermal kinetics of the crystallization process is presented using the modified Ozawa equation. The activation energy E increased from 3.3 to 3.5 eV for the LBAO (x < 0.01) glasses whereas those of the LBAO (x > 0.05) glasses slightly increased from 3.75 to 4.05 eV. The exponent n was estimated to be 3.9 ± 0.1 for the LBAO (x < 0.01) glasses and 3.2 ± 0.02 for the LBAO (x > 0.05) glasses. Microstructural characterization of the glassy and crystalline phases using atomic force microscopy was investigated. The effects of Al2O3 on the LBAO glasses include a decreased nucleation rate in the crystallization process and a significantly reduced crystal size.

• 한국분말재료학회지
• /
• 제28권6호
• /
• pp.497-501
• /
• 2021

Cobalt (Co) is mainly used to prepare cathode materials for lithium-ion batteries (LIBs) and binder metals for WC-Co hard metals. Developing an effective method for recovering Co from WC-Co waste sludge is of immense significance. In this study, Co is extracted from waste cemented carbide soft scrap via mechanochemical milling. The leaching ratio of Co reaches approximately 93%, and the leached solution, from which impurities except nickel are removed by pH titration, exhibits a purity of approximately 97%. The titrated aqueous Co salts are precipitated using oxalic acid and hydroxide precipitation, and the effects of the precipitating agent (oxalic acid and hydroxide) on the cobalt microstructure are investigated. It is confirmed that the type of Co compound and the crystal growth direction change according to the precipitation method, both of which affect the microstructure of the cobalt powders. This novel mechanochemical process is of significant importance for the recovery of Co from waste WC-Co hard metal. The recycled Co can be applied as a cemented carbide binder or a cathode material for lithium secondary batteries.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.68-75
• /
• 2022

The breathable film refers to a high-functional film that allows gas and water vapor to pass through very fine and sophisticated pores but not liquid. In this research, the breathable film was prepared based on linear low-density polyethylene (LLDPE) and CaCO₃ particles by extrude method. The LLDPE composite film containing CaCO₃ particles had excellent mechanical properties and functionalties. The drawing is a technologically simple and excellent method for improving the mechanical properties of composite films. In this work, the effects of draw ratio on morphology, crystallinity, pore size distribution, mechanical properties, and water vapor permeability of the films were examined. The results revealed that both surface morphology and breathability were affected by the influence of chain orientation and crystal growth with increasing the draw ratio. The mechanical properties were improved with increasing the draw ratio.

• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.25-29
• /
• 2021

본 연구에서는 HVPE 방법을 사용하여 Ni-Pd and Carbon-Nanotube nanoalloys (Ni-Pd-CNT) 위에 α-Ga₂O₃을 성장시켜 Ni-Pd-CNT에 따른 효과를 확인하였다. 그 결과, 무전해 Ni 도금 시간 40초에서 성장한 α-Ga₂O₃ 에피층의 두께는 11 ㎛로 확인되었다. 또한, α-Ga₂O₃ 에피층의 표면 형태는 균열 발생 없이 기판에 대한 우수한 접착력을 보여주었다. 결과적으로, 성장과정에서 발생한 수평 성장에 의해 α-Ga₂O₃ 대의 비대칭면인 ($10{\bar{1}}4$) FWMH 값을 크게 감소할 수 있었다.

• Composites Research
• /
• 제35권4호
• /
• pp.298-302
• /
• 2022

할라이드 페로브스카이트 물질은 우수한 광전특성으로 인해 차세대 디스플레이에 응용시킬 물질로서 주목받고 있다. 본 연구에서는 다공성 SiO₂ 나노입자의 기공 내부에서 제한시킨 결정 성장을 통하여 할라이드 페로브스카이트의 안정성 문제를 해결한, CsPbBr₃의 새로운 소결법을 제안한다. 최적의 소결 조건에서 소결된 CsPbBr₃-SiO₂ 나노입자는 515 nm의 발광 피크를 나타낸다. CsPbBr₃-SiO₂ 나노입자는 소결 과정 중 닫힌 기공에 말미암아 몇 종의 극성 용매 속에서도 안정적으로 발광 특성을 유지할 수 있었으며, 이는 디스플레이용 색변환 필름으로서의 응용 가능성을 보여준다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.68-68
• /
• 2001

Thin films of polycrystalline silicon (poly-Si) is a promising material for use in large-area electronic devices. Especially, the poly-Si can be used in high resolution and integrated active-matrix liquid-crystal displays (AMLCDs) and active matrix organic light-emitting diodes (AMOLEDs) because of its high mobility compared to hydrogenated _amorphous silicon (a-Si:H). A number of techniques have been proposed during the past several years to achieve poly-Si on large-area glass substrate. However, the conventional method for fabrication of poly-Si could not apply for glass instead of wafer or quartz substrate. Because the conventional method, low pressure chemical vapor deposition (LPCVD) has a high deposition temperature ($600^{\circ}C-1000^{\circ}C$) and solid phase crystallization (SPC) has a high annealing temperature ($600^{\circ}C-700^{\circ}C$). And also these are required time-consuming processes, which are too long to prevent the thermal damage of corning glass such as bending and fracture. The deposition of silicon thin films on low-cost foreign substrates has recently become a major objective in the search for processes having energy consumption and reaching a better cost evaluation. Hence, combining inexpensive deposition techniques with the growth of crystalline silicon seems to be a straightforward way of ensuring reduced production costs of large-area electronic devices. We have deposited crystalline poly-Si thin films on soda -lime glass and SiOz glass substrate as deposited by PVD at low substrate temperature using high power, magnetron sputtering method. The epitaxial orientation, microstructual characteristics and surface properties of the films were analyzed by TEM, XRD, and AFM. For the electrical characterization of these films, its properties were obtained from the Hall effect measurement by the Van der Pauw measurement.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.505-512
• /
• 2023

This study investigated crystal structures, microstructures, and electric-field-induced strain (EFIS) properties of Bi-based lead-free ferroelectric/relaxor composites. Bi_1/2Na_0.82K_0.18)_1/2TiO₃ (BNKT) as a ferroelectric material and 0.78Bi_1/2(Na_0.78K_0.22)_1/2TiO₃-0.02LaFeO₃ (BNKT2LF) as a relaxor material were synthesized using a conventional solid-state reaction method, and the resulting BNKT2LF powders were subjected to high-energy ball milling (HEBM) after calcination. As a result, HEBM proved a larger average grain size of sintered samples compared to conventional ball milling (CBM). In addition, the increased sintering time led to grain growth. Furthermore, HEBM treatment and sintering time demonstrated a significant effect on EFIS of BNKT/BNKT2LF composites. At 6 kV/mm, 0.35% of the maximum strain (S_max) was observed in the HEBM sample sintered for 12 h. The unipolar strain curves of CBM samples were almost linear, indicating almost no phase transitions, while HEBM samples displayed phase transitions at 5~6 kV/mm for all sintering time levels, showing the highest S_max/E_max value of 700 pm/V. These results indicated that HEBM treatment with a long sintering time might significantly enhance the electromechanical strain properties of BNT-based ceramics.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.162-167
• /
• 2023

망간산화물은 다양한 결정구조를 가지고 있으며, 특히 초기에 생성되는 나노층상구조의 δ-MnO₂ 가 다양한 산화환원 반응에 따라 여러가지 터널 및 층상구조로 변화한다. 최근Zn기반 이차전지에 대한 관심이 증가하고 있지만, 충방전 간 Zn이온이 양극재로 사용되는 망간산화물 결정 구조 변화 및 새로운 결정 생성 등에 미치는 영향에 대한 기초적 이해를 위해 Zn이온이 망간산화물 결정에 미치는 영향에 대한 연구가 더욱 필요하다. 본 연구에서는 수열반응 간 Zn 도핑정도가 조절된 나노층상구조의 δ-MnO₂의 변화를 통해 todorokite과 chalcophanite이 생성 및 성장되는 것을 확인하였고, 반응 시간에 따른 변화과정을 확인하였다. Zn의 양이 많을수록 chalcophanite 결정이 우세하게 생성되었고, 결정 생성이 상대적으로 느린 속도로 발생하는 것을 확인하였다.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.400-405
• /
• 2023

Tb³⁺-doped CaNb₂O₆ (CaNb₂O₆:Tb³⁺) thin films were deposited on quartz substrates at a growth temperature of 300 ℃ using radio-frequency magnetron sputtering. The deposited thin films were annealed at several annealing temperatures for 20 min and characterized for their structural, morphological, and luminescent properties. The experimental results showed that the annealing temperature had a significant effect on the properties of the CaNb₂O₆:Tb³⁺ thin films. The crystalline structure of the as-grown CaNb₂O₆:Tb³⁺ thin films transformed from amorphous to crystalline after annealing at temperatures greater than or equal to 700 ℃. The emission spectra of the thin films under excitation at 251 nm exhibited a dominant emission band at 546 nm arising from the ⁵D₄→⁷F₅ magnetic dipole transition of Tb³⁺ and three weak emission bands at 489, 586, and 620 nm, respectively. The intensity of the ⁵D₄→⁷F₅ (546 nm) magnetic dipole transition was greater than that of the ⁵D₄→⁷F₆ (489 nm) electrical dipole transition, indicating that the Tb³⁺ ions in the host crystal were located at sites with inversion symmetry. The average transmittance at wavelengths of 370~1,100 nm decreased from 86.8 % at 700 ℃ to 80.5 % at an annealing temperature of 1,000 ℃, and a red shift was observed in the bandgap energy with increasing annealing temperature. These results suggest that the annealing temperature plays a crucial role in developing green light-emitting CaNb₂O₆:Tb³⁺ thin films for application in electroluminescent displays.

• Journal of Ginseng Research
• /
• 제48권2호
• /
• pp.171-180
• /
• 2024

Background: Epimers of ginsenoside Rg3 (Rg3) have a low bioavailability and are prone to deglycosylation, which produces epimers of ginsenoside Rh2 (S-Rh2 and R-Rh2) and protopanaxadiol (S-PPD and R-PPD). The aim of this study was to compare the efficacy and potency of these molecules as anti-cancer agents. Methods: Crystal violet staining was used to study the anti-proliferatory action of the molecules on a human epithelial breast cancer cell line, MDA-MB-231, and human umbilical vein endothelial cells (HUVEC) and compare their potency. Cell death and cell cycle were studied using flow cytometry and mode of cell death was studied using live cell imaging. Anti-angiogenic effects of the drug were studied using loop formation assay. Molecular docking showed the interaction of these molecules with vascular endothelial growth factor receptor-2 (VEGFR2) and aquaporin (AQP) water channels. VEGF bioassay was used to study the interaction of Rh2 with VEGFR2, in vitro. Results: HUVEC was the more sensitive cell line to the anti-proliferative effects of S-Rh2, S-PPD and R-PPD. The molecules induced necroptosis/necrosis in MDA-MB-231 and apoptosis in HUVEC. S-Rh2 was the most potent inhibitor of loop formation. In silico molecular docking predicted a good binding score between Rh2 or PPD and the ATP-binding pocket of VEGFR2. VEGF bioassay showed that Rh2 was an allosteric modulator of VEGFR2. In addition, SRh2 and PPD had good binding scores with AQP1 and AQP5, both of which play roles in cell migration and proliferation. Conclusion: The combination of these molecules might be responsible for the anti-cancer effects observed by Rg3.