• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.336-341
• /
• 2016

This paper presents an implementation of a communication network in wind turbines, which exploits the power-line communication system (PLC). We used an inductive coupling unit and a multi-interface device to connect a data-communication terminal to the power line, to ensure that stable communication was possible at various electric current and voltage values of the generator. The results of the operation tests conducted on an operational wind turbine showed that the implemented PLC demonstrated a transmission rate of at least 43 Mbps with a 100% success rate. Moreover, a real-time image was transmitted. Thus, the system could be a useful alternative for implementing a communication network in wind turbines that does not require additional channels. Since the presented system is easy to implement, and can support various interfaces for data communication, it will be quite useful when a real-time monitoring system is launched in wind turbines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1831-1838
• /
• 2015

In this paper, a method of implementing a communication network in ship, which exploits a powerline-based legacy-line communication system (LLC), is presented. We develop an inductive coupling unit and a multi-interface device to connect a data communication terminal to the powerline. As a result of operation tests for the ship under working, the implemented LLC shows a transmission rate of at least 25.8 Mbps in the distance of 200 m away with 100% success rate. Thus, the system can be a useful alternative to implement a communication network in ship without additional channels. Being easy to be implemented and supporting various interfaces for data communication, the presented system will be very effective when a real-time monitoring system is launched in future digital ship.

• Journal of Wetlands Research
• /
• v.16 no.4
• /
• pp.389-402
• /
• 2014

In this study, simulation technique with multi-dimensional model(EFDC), coupled with COSFIM and FLDWAV, has been applied to the upstream and downstream of weirs for hydraulic characteristics analysis through development of system and was performed for 8 multi-function weirs on Nakdong river using developed system. COSFIM, FLDWAV and EFDC can utilize suitable model in situation because they have pros and cons according to practical use purpose. Developed technique can offers spatial and grid unit information as well as line and section unit information from 1-D modeling. It is considered that the coupling simulation technique can provide useful hydraulic information for river management and treatment.

• Smart Structures and Systems
• /
• v.13 no.4
• /
• pp.501-515
• /
• 2014

This paper presents a linear computational homogenization framework to evaluate the effective (or generalized) electromechanical coupling coefficient (EMCC) of adaptive structures with piezoelectric structural fiber (PSF) composite elements. The PSF consists of a silicon carbide (SiC) or carbon core fiber as reinforcement to a fragile piezo-ceramic shell. For the micro-scale analysis, a micromechanics model based on the variational asymptotic method for unit cell homogenization (VAMUCH) is used to evaluate the overall electromechanical properties of the PSF composites. At the macro-scale, a finite element (FE) analysis with the commercial FE code ABAQUS is performed to evaluate the effective EMCC for structures with the PSF composite patches. The EMCC is postprocessed from free-vibrations analysis under short-circuit (SC) and open-circuit (OC) electrodes of the patches. This linear two-scale computational framework may be useful for the optimal design of active structure multi-functional composites which can be used for multi-functional applications such as structural health monitoring, power harvest, vibration sensing and control, damping, and shape control through anisotropic actuation.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1839-1843
• /
• 2006

Hydrothermal reactions of $Ln(NO_3)_3{\cdot}5H_2O $ (Ln = Eu (1), Sm (2), Ho (3), Dy (4)) with 3,5-pyridinedicarboxylic acid (3,5-pdcH2) in the presence of 4,4'-bipyridine led to the formation of the 3-D Ln(III)-coordination polymers with a formula unit of $[Ln_2(3,5-pdc)_2(C_2O_4)(H_2O)_4]{\cdot}2H_2O$. These polymers contain a bridging oxalate ligand ($C_2O_4\;^2$). On the basis of GCMS study of the mother liquor remaining after the reaction, we proposed that the $C_2O_4\;^2$ formation proceeds in three steps: (1) Ln(III)-mediated decarboxylation of $3,5-pdcH_2$ to give $CO_2$, (2) the reduction of $CO_2$ to $CO_2\;^{\cdot}$ by the Ln(II) species, and (3) the reductive coupling of the two $CO_2\;^{\cdot}$ radicals to the oxalate ($C_2O_4\;^2$) ion. All polymers were structurally characterized by X-ray diffraction.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1408-1409
• /
• 2006

In this paper, poly methyl methacrylate thin films were deposited on a ITO glass substrate using a plasma polymerization technique. In order to investigate the influence of the plasma coupling method and plasma conditions on the plasma polymerized poly methyl methacrylate (ppMMA) thin film properties, inductively coupled (ICP) and capacitively coupled plasma (CCP) were used to generate the plasma and the plasma parameters were varied. Molecular structures of the ppMMAs were investigated using a Fourier Transform Infrared (FT-IR) spectroscopy. Dielectric constants of the ppMMA thin films were investigated using a impedance analyzer (HP4192A, LF Impedance Analyzer). Current-Voltage (I-V) characteristics of the ppMMA thin films were investigated using a source measurement unit (SMU: Keithley 2400). Relationship between the plasma coupling technique/process parameter and ppMMA thin films properties were investigated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1430-1435
• /
• 2007

We developed a 440MHz surface acoustic wave (SAW) microsensor integrated with pressure-temperature sensors and ID tag. Two piezoelectric substrates were bonded, in which ${\sim}150\;{\mu}m$ cavity was structured. Four sides were completely sealed by JSR photoresist (PR). Pressure sensor was placed on the top substrate, whereas ill tag and temperature sensor were placed on the bottom substrate. Using network analyzer, the developed microsensor was wirelessly tested. Sharp reflection peaks with high S/N ratio, small signal attenuation, and small spurious peaks were observed. All the reflection peaks were well matched with the coupling of mode (COM) simulation results. With a 10mW RF power from the network analyzer, a ${\sim}1$ meter readout distance was observed. Eight sharp ON reflection peaks were observed for ID tag. Temperature sensor was characterized from $20^{\circ}C$ to $200^{\circ}C$. A large phase shift per unit temperature change was observed. The evaluated sensitivity was ${\sim}10^{\circ}/^{\circ}C$.

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.532-538
• /
• 2008

Epoxy-based azopolymers were synthesized by the reaction of the diglycidyl ether of bisphenol A (DGEBA) or N,N-diglycidyl aniline (DGA) with disperse orange 3 (DO3) to give poly(DGEBA-co-DO3) or poly(DGA-co-DO3), respectively. Aniline-based azopolymers prepared from poly(DGA-co-An) precursors, synthesized by the reaction of DGA with aniline, were produced by the post-azo coupling reaction with diazonium salts containing various substituents. Holographic gratings were carried out to measure the diffractive efficiencies (DE) for the interference patterns of the $Ar^+$ laser from 50 to $300\;mW/cm^2$ intensity. The shorter repeating unit with higher chromophore density induced deeper surface relief gratings (SRG). Large surface gratings were observed for the aniline-based azopolymers with -COOH substituents, as compared with those for epoxy-based azopolymers. The aniline-based azopolymers with dimerized chromophores and various substituents were also synthesized to observe the effect of chromophore substituents and dimerization on the holography. The dimerized chromophores were more sensitively photoisomerized by the $Ar^+$ laser beam, and demonstrated a larger grating than that with one azo bond.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.44-52
• /
• 2002

Composite materials are created by combining two or more component to achieve desired properties which could not be obtained with the separate components. The use of reinforcing fillers, which can reduce material costs and improve certain properties, is increasing in thermoplastic polymer composites. Currently, various inorganic fillers such as talc, mica, clay, glass fiber and calcium carbonate are being incorporated into thermoplastic composites. Nevertheless, lignocellulose fibers have drawn attention due to their abundant availability, low cost and renewable nature. In recent, interest has grown in composites made from lignocellulose fiber in thermoplastic polymer matrices, particularly for low cost/high volume applications. In addition to high specific properties, lignocellulose fibers offer a number of benefits for lignocellulose fiber/thermoplastic polymer composites. These include low hardness, which minimize abrasion of the equipment during processing, relatively low density, biodegradability, and low cost on a unit-volume basis. In spite of the advantage mentioned above, the use of lignocellulose fibers in thermoplastic polymer composites has been plagued by difficulties in obtaining good dispersion and strong interfacial adhesion because lignocellulose fiber is hydrophilic and thermoplastic polymer is hydrophobic. The application of lignocellulose fibers as reinforcements in composite materials requires, just as for glass-fiber reinforced composites, a strong adhesion between the fiber and the matrix regardless of whether a traditional polymer matrix, a biodegradable polymer matrix or cement is used. Further this article gives a survey about physical and chemical treatment methods which improve the fiber matrix adhesion, their results and effects on the physical properties of composites. Coupling agents in lignocellulose fiber and polymer composites play a very important role in improving the compatibility and adhesion between polar lignocellulose fiber and non-polar polymeric matrices. In this article, we also review various kinds of coupling agent and interfacial mechanism or phenomena between lignocellulose fiber and thermoplastic polymer.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.645-656
• /
• 2012

The basin environment has been seriously damaged by reckless development during the past half century. The demand for management in the basin has increased, but the system for prediction and management is not sufficient. Therefore, the aim of this study is to design a GIS-based water quality linkage system using the most suitable simulation, HSPF (Hydrological Simulation Program-Fortran) in this basin of South Korea. To achieve this, data of HSPF model for simulation and GIS data for spatial analysis is collected. And the system applied linkages of the water quality model and GIS such as Loose coupling. Also, the major function of the system was designed as a modular unit. Ultimately, the system is developed using development language of VB.NET from Microsoft and ArcObjects component from ESRI based on design for a module unit. The water quality simulation system can be supported to prediction and management for basin environment of Yeong-San River. In the future study, scenario will be established using the result of HSPF model And will be expected to support to situation of future basin and policy making.