• 제목/요약/키워드: contro system design

검색결과 15건 처리시간 0.028초

Invitation to Levitotion Contro: Problems Expecting a Smart Solution

  • Kim, Kook-Hun
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.316-320
    • /
    • 1993
  • Electromagnetic suspension (E.M.S) type levitation system is studied in the control system design viewpoint. Dynamic characteristics in theoretical analysis as well as hardware implementation is considered. Open loop unstable, non-linear and timevarying characteristics are reviewed in the theoretcal section, while levitation control system for multi-vehicle train as well as magnet drive system is reviewed in the practical section. This paper suggests not only some well-known problem appearing in levitation control system design but also a subtle problem and solution candidates. But there exist many unmentioned problems wating for a smart problem solver.

  • PDF

SFC에 의한 권역별 처리 방법에 관한 연구 (Study on the method of Block processing by SFC)

  • 유정봉
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
    • /
    • pp.273-275
    • /
    • 2006
  • Ladder Diagram(LD) is the most widely utilized among many sorts of existing programs using for the design of process control system. But it is very difficult to grasp sequential flow of control logic. In this paper, we proposed the method that we can control a lot of blocks. We used PLC in process control system. And, in order to design we used Sequential Function Chart(SFC). In this paper, we proposed the method of block contro. and confirmed feasibility through a simulation.

  • PDF

새로운 SMC를 이용한 BLDC 전동기 제어에 관한 연구 (A Study on the BLDC Motor Contro with Noble SMC)

  • 박승규
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
    • /
    • pp.216-220
    • /
    • 1999
  • In this paper, the feedback linearization technique is used with the sliding mode control for nonlinear system. The combination of these two control techniques can be achieved by proposing a novel sliding surface which has the nonminal dynamics of the original system controlled by feedback linearization technique. The noble design of the sliding surface is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching phase is removed by using an initial virtual state which makes the initial sliding function equal to zero

  • PDF

발사체 추력벡터 제어 (Thrust Vector Control for a Launch Vehicle)

  • 최재원;박명관
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 추계학술대회 논문집
    • /
    • pp.610-613
    • /
    • 1995
  • In addition to propulsive force to a flying vehicle, a rocket propulsion system can provide moments ro rotatate the flying vehicle and thus provide control of the vehicle's attitude and flight path. By controlling the direction of the thrust vectors, it is possible to control a vehicle's pitch, yaw, and roll motions. In this paper, we will introduce general thrust vector control mechanisms.

  • PDF

2관성 시스템의 속도 제어를 위한 강건 제어기의 설계 (The design of a robust controller for the speed control of a two-mass system)

  • 이상효;이상철;황영민
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.767-770
    • /
    • 1996
  • A H$\_$.inf./ contro theory was applied to motor speed control of two-mass system to get controller which acts effectively with control object including uncertainties. The H$\_$.inf./ control problem was composed and solved. After that, numerical simulation were executed to confirm ability of the controller which compared with PI controller.

  • PDF

3상 AC/DC 컨버터를 위한 퍼지전류제어기 설계 (A Design on Fuzzy Logic Current Regulator for three-phase AC/DC Power Converters)

  • 조성민;김병진;박석현;김순용;전희종
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.469-471
    • /
    • 1999
  • In this paper, the method of Space-Vector Pulse Width Modulation(SVPWM) with Fuzzy Logic Regulator(FLR) is proposed. In a conventional SVPWM, the procedures of phase transformation and choosing PWM patterns are complex. So, it should be implemented with high performance processor like Digital Signal Processor(DSP). In order to reduce a calculation burden, a proposed system adopts FLR. Using a linguistic contro strategy based on expert knowledge, FLR relieves the processor from a heavy computations. In simulations, the proposed system is validated.

  • PDF

시간지연 시스템에 대한 혼합 $H_2$/$H_{\infty}$ 출력궤환 제어기 설계 (Mixed $H_2$/$H_{\infty}$ Output Feedback Controller Design for Time-Delayed System)

  • 양혜진;김종해;조용철;박흥배
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.331-331
    • /
    • 2000
  • This paper presents the mixed $H_2/H_{\infty}$ output feedback controIler design method for linear systems with delayed state. The objective is to design the output feedback controller which minimizes the H$_2$-norm of one transfer function while ensuring the H$_{\infty}$-norm of the other is held below a chosen level. When objective is tormulated in terms of a common Lyapunov function, the sufficient conditions of existence of mixed $H_2/H_{\infty}$ controller are given in terms of LMIs. terms of LMIs.

  • PDF

Robust model matching design using normalized left coprime factorization approach

  • Hanajima, Naohiko;Eisaka, Toshio;Yanagita, Yoshiho;Tsuchiya, Takeshi;Tagawa, Ryozaburo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.360-365
    • /
    • 1993
  • In this paper, we propose a new design procedure of the Robust Model Matching(RM) using the Normalized Left Coprime Factorization (NLCF) approach. The RMM aims at reducing the sensitivity of a given control system, but standard design procedures are not for robust stability. Therefore we try applying the robust stability condition based on NLCF to RMM procedure. We first formulate the RMM using the robust stability condition of NLCF approach, then we propose the new procedure of the RMM. The point is that the condition includes the measure of sensitivity of the RMM. In the proposed procedure, a cost function is determined through the condition and solved by H$_{\infty}$ contro technique. Finally we show a design example and check the performance..

  • PDF

Construction of a robust dead beat control system considered a transient response

  • Yoshida, Satoru;Kamiya, Yuji
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
    • /
    • pp.106-109
    • /
    • 1995
  • First, in this paper we propose a new dead best control system design technique by which we can specify a transient response before the settling time. Though the resultant system has the same system configuration as Reference[1], that is realized by adapting the performance index which includes the term of the square of difference between specified and pracitical responses. Next, we state a technique which gives the dead beat control system robustness and construct a robust dead beat control system. Simulations of the proposed dead beat control and robust dead beat control systems show expected results.

  • PDF

HVDC의 축소형 모델 개발에 관한 연구 (A Study on Development of Scaled-down HVDC Model)

  • 안종보;윤재영;김국헌;이종무;김종문;이기도
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
    • /
    • pp.219-221
    • /
    • 1999
  • HVDC(High Voltage Direct Current) transmission system was constructed between Cheju island and mainland Haenam and has been operating commercially since 1998. But research activities in this area are not so much. That is caused by the facts that HVDC is large scale system and it is not so easy to implement and to test. Though such simulation tools as RTDS(Real Time Digital Simulator) and EMTDC can be useful, these have limitations for actual control and protective system design. Therefore scaled-down HVDC model was developed for the purpose of researches at operating technique, control and protection methods. The design of this model was based on real Cheju-Haenam HVDC system. And additionally faults simulator such as ground fault, short-circuit and change of impedance in transmission line is equipped for analysis of these faults. Control system of the model was implemented fully digitally. So it is very easy for the researchers to develope control and protection algorithm and to test the performance.

  • PDF