• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.81-82
• /
• 2014

Modular housing has many advantages such as economy, flexibility and reusability. The domestic modular housing of a continuous stacking method has been built in military facilities, and dormitories. However, there is a limit to present diversity of low-rise multi-family housing. A cross stacking method is a way to pursue diversity of that but there is a difficulty to apply it owe to lack of cases and related technologies. Therefore, the purpose of this study is to suggest application techniques in design phase of applying the crossing stacking method in advance.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.369-380
• /
• 2001

Although extensive efforts have been devoted to the optimal design of composite laminated plates in recent years, some practical issues still need further research. Two of them are: the handling of the ply angle as either continuous or discrete; and that of the uncertainties in material properties, which were treated as continuous and ignored respectively in most researches in the past. In this paper, an algorithm for stacking sequence optimization which deals with discrete ply angles and that for thickness optimization which considers uncertainties in material properties are used for a two step optimization of composite laminated plates. In the stacking sequence optimization, the branch and bound method is modified to handle discrete variables; and in the thickness optimization, the convex modeling is used in calculating the failure criterion, given as constraint, to consider the uncertain material properties. Numerical results show that the optimal stacking sequence is found with fewer evaluations of objective function than expected with the size of feasible region taken into consideration; and the optimal thickness increases when the uncertainties of elastic moduli considered, which shows such uncertainties should not be ignored for safe and reliable designs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1129-1132
• /
• 1995

In the preparation of the layered $BaTiO_3$ thin films with high performance, the new stacking method using the continuous cooling of the substrate was introduced. Amorphous/polycrystalline $BaTiO_3$ layered structure was confirmed by SEM and index of refraction. The layered $BaTiO_3$ thin films formed by the new stacking method showed such a high dielectric constant that the layered structure could not be explained by a stacking structure of the two defined layers but could only be explained by multi-layered structure, i.e. amorphous/micro crystalline/polycrystalline structure. The layered $BaTiO_3$ thin film with a thickness of 240 nm showed higher capacitance per unit area and breakdown strength than the double layered $BaTiO_3$ thin film prepared by the conventional stacking method. And well defined ferroelectric hysteresis leer was observed in the layered $BaTiO_3$ thin film with a thickness of 200 nm.

• 한국실내디자인학회논문집
• /
• 제13권3호
• /
• pp.145-152
• /
• 2004

The European architects including MVRDV, Rem Koolhaas, Van Berkel, and Zaha Hadid tend to use the their own design strategy based on the objective data. This Architectural design method leads to make new paradigm of contemporary architecture. For the purpose of the understanding a part of new architecture paradigm I will analyze the case of Villa VPRO designed by MVRDV. At the result, I can draw the following conclusions. First, through collecting and analyzing data, drawing design concept and planning the space program, they decided on the design strategies of Villa VPRO. They designed the space volume having 42.4m$\times$42.4m floors and infiltrated environmental elements to solve the problems about deep space. Second, Villa VPRO was constructed by 'creative space-making system: a series of floors much like a geological formation, the continuous floors interconnected by spatial means, the precision bombardments of snake-like holes, open elevations, the stacking spaces. Third, Villa VPRO produced the spectacle space effect the various formation of continuous floors make a lot of difference space types in this building. Also they lead to move naturally and give event space. A numbers of holes and openness make it possible to provide friendly environment with combining light and air with views of the surrounding and transparency. And using the method of stacking many types of space make the differences in height.

• 한국지구과학회지
• /
• 제28권7호
• /
• pp.903-913
• /
• 2007

천부지반에서 레일리파의 군속도와 위상속도 분산곡선을 역산하여 S파 속도구조를 구하는 방법을 비교하였다. 위상속도를 구하기 위해서 ${\tau}-p$ stacking 방법을 이용하였고, 군속도를 구하기 위해서 두 가지 방법, multiple filtering technique(MFT) continuous wavelet transform(CWT) 방법을 사용하였다. 고차모드가 존재하는 경우, 위상속도에서 기본모드와 고차모드를 분리하기가 용이하지 않았고, 군속도에서는 continuous wavelet transform 방법이 multiple filtering technique보다 효과적이었다. S파 속도 역산 결과, 위상속도와 군속도의 기본 모드만 역산할 경우, 신뢰구간의 깊이가 아주 얕았다. Continuous wavelet transform으로 구한 기본 모드와 1차 모드를 동시 역산할 경우, 신뢰구간의 깊이가 2배 이상 증가함을 알 수 있었다. 이는 1차 모드의 에너지가 더 깊은 층을 통과함으로 깊은 층에 대한 5파 속도 정보를 지니고 있기 때문으로 보인다. 위의 방법을 서해안 동호항의 조간대에 적용하여, continuous wavelet transform으로 구한 군속도의 기본 모드와 1차 모드를 동시 역산하여 S파 속도구조를 구하고, 해당 지역의 시추조사 결과와 비교하였다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.378-383
• /
• 2013

Continuous fiber-reinforced ceramic matrix composites (CFCCs) have a complex distribution of porosity, consisting of interfiber micro pores and interbundle/interply macro pores. Owing to the complex geometry of the pores and fiber architecture, it is difficult to obtain representative microstructural features throughout the specimen volume with conventional, destructive ceramographic approaches. In this study, we introduce X-ray computed microtomography (X-ray ${\mu}CT$) to nondestructively analyze the microstructures of disk shaped and tubular $SiC_f$/SiC composites fabricated by the chemical vapor infiltration (CVI) method. The disk specimen made by stacking plain-woven SiC fabrics exhibited periodic, large fluctuation of porosity in the stacking direction but much less variation of porosity perpendicular to the fabric planes. The X-ray ${\mu}CT$ evaluation of the microstructure was also effectively utilized to improve the fabrication process of the triple-layered tubular SiC composite.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1214-1218
• /
• 2005

As demands for precision parts are increased, existing methods to fabricate them such as MEMS, LIGA technology have the technical limitations like high precision, high functionality and ultra miniaturization. A micro-stereolithography technology based on $DMD^{TM}$(Digital Micromirror Device) can meet these demands. In this technology, STL file is the standard format as the same of conventional rapid prototyping system, and 3D part is fabricated by stacking layers that are sliced as 2D section from STL file. Whereas in conventional method, the resin surface is cured as scanning laser beam spot according to the section shape, but in this research, we use integral process which enables to cure the resin surface at one time. In this paper, we deal with the dynamic pattern generation and $DMD^{TM}$ operation to fabricate micro structures. Firstly, we address effective slicing method of STL file, conversion to bitmap, and dynamic pattern generation. Secondly, we suggest $DMD^{TM}$ operation and optimal support manufacturing for $DMD^{TM}$ mounting. Thirdly, we examine the problems on continuous stacking layers, and their improvements in software aspects.

• 전산구조공학
• /
• 제10권2호
• /
• pp.255-263
• /
• 1997

실제로 구조시스템들의 최적설계는 설계변수가 연속값이 아닌 이산값을 요하는 경우가 대부분이다. 본 논문은 이산형 설계변수를 갖는 비대칭 복합 적층평판에 대해 선형 근사화방법을 이용한 이산최적설계를 수행하였으며, 이 방법이 매우 효율적임을 보였다. 대상 문제는 축력, 전단력, 그리고 휨과 비틀림 모멘트의 평면 내하중들(in-plane loads)의 다중하중조건을 받는 것으로 고려하였으며, 복합 적층평판을 구성하는 플라이들에 대한 최대변형률 규준을 설계 제약조건으로 부과하였다. 이산 최적화를 위한 초기 접근방법으로 단 한번의 연속변수 최적화 과정이 FDM(Feasible Direction Method)을 이용하여 수행되었으며, 차후 이산 및 연속변수를 포함하는 비선형 이산최적화문제를 SLDP(Sequential Linear Discrete Programming)방법에 의해 선형 근사화된 혼합정수계획문제로 형성하여 풀었다. 수치예에서 6개의 플라이로 구성된 비대칭 복합 적층평판을 대상으로 회전식 적층배열([(90-.theta.)/-(60+.theta.)/-.theta./-(45+.theta.)/(45-.theta.)]/sub s/)에 따른 이산최적해를 구하였다. 효율성 입증을 위해 똑같은 문제를 비선형 분기한계법을 이용하여 풀었으며, 그 결과를 비교 분석하였다.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.627-635
• /
• 2020

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.14-21
• /
• 2022

In the powder bed fusion (PBF) process, a 3D shape is formed by the continuous stacking of very fine powder layers using computer-aided design (CAD) modeling data, following which laser irradiation can be used to fuse the layers forming the desired product. In this method, the main process parameters for manufacturing the desired 3D products are laser power, laser speed, powder form, powder size, laminated thickness, and laser diameter. Stainless steel (STS) 316L exhibits excellent strength at high temperatures, and is also corrosion resistant. Due to this, it is widely used in various additive manufacturing processes, and in the production of corrosion-resistant components with complicated shapes. In this study, rectangular specimens have been manufactured using STS 316L powder via the PBF process. Further, the effect of heat treatment at 800 ℃ on the microstructure and hardness has been investigated.