• 한국물환경학회지
• /
• 제24권1호
• /
• pp.36-43
• /
• 2008

To develop the continuous water quality monitoring system using the daphnid Daphnia sp., the growth of test animal, sensitivity, and behaviour response of toxicants were observed. Growth of test animal significantly increased with increasing the food density under the 90~105 mg/L ($CaCO_3$) hardness, except the concentration of food (Chrollela sp.) was exceeded than optimal food supply. Behaviour responses of test animals were continuously analyzed by changes of fractal dimension value (FDV). The FDV sharply decreased after exposure to the concentrations of 0.13 mg/L copper, 0.06 mg/L lead, and 0.38 mg/L cadmium. In these concentrations, mortality and abnormal behaviour of daphnids exhibited within ca. 1.0-h after exposure. Comparison of 24-h $LC_{50}$ values with other zooplankton species indicated that sensitivity of the Daphnia sp. was higher than most zooplankton for lead, and brain shrimp, rotifer, and water flea (Ceriodaphnia dubia, D. magna) for copper, and brain shrimp, water flea (D. lumholzi), and amphipod for cadmium. Based on the above experimental results, significant relationship between toxicity and behaviour response of Daphnia sp. was supported the high potential of water quality monitoring system. Consequently, behavioural monitoring method in this study suggests a good estimation tool for detection of the discharged toxicants in water body and for ecotoxicological assessment aquatic organisms.

• Ocean Science Journal
• /
• 제40권1호
• /
• pp.25-44
• /
• 2005

Long-term, continuous, and real-time ocean monitoring has been undertaken in order to evaluate various oceanographic phenomena and processes in the East/Japan Sea. Recent technical advances combined with our concerted efforts have allowed us to establish a real-time monitoring system and to accumulate considerable knowledge on what has been taking place in water properties, current systems, and circulation in the East Sea. We have obtained information on volume transport across the Korea Strait through cable voltage measurements and continuous temperature and salinity profile data from ARGO floats placed throughout entire East Sea since 1997. These ARGO float data have been utilized to estimate deep current, inertial kinetic energy, and changes in water mass, especially in the northern East Sea. We have also developed the East Sea Real-time Ocean Buoy (ESROB) in coastal regions and made continual improvements till it has evolved into the most up-to-date and effective monitoring system as a result of remarkable technical progress in data communication systems. Atmospheric and oceanic measurements by ESROB have contributed to the recognition of coastal wind variability, current fluctuations, and internal waves near and off the eastern coast of Korea. Long-tenn current meter moorings have been in operation since 1996 between Ulleungdo and Dokdo to monitor the interbasin deep water exchanges between the Japanese and Ulleung Basins. In addition, remotely sensed satellite data could facilitate the investigation of atmospheric and oceanic surface conditions such as sea surface temperature (SST), sea surface height, near-surface winds, oceanic color, surface roughness, and so on. These satellite data revealed surface frontal structures with a fairly good spatial resolution, seasonal cycle of SST, atmospheric wind forcing, geostrophic current anomalies, and biogeochemical processes associated with physical forcing and processes. Since the East Sea has been recognized as a natural laboratory for global oceanic changes and a clue to abrupt climate change, we aim at constructing a 4-D continuous real-time monitoring system, over a decade at least, using the most advanced techniques to understand a variety of oceanic processes in the East Sea.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.829-834
• /
• 2004

This research is to development advanced health(condition) monitoring system of superconducting motors. Development of advanced condition monitoring systems offers the prospect of improved performance, assessment, and operation, simplified design, enhanced safety, and reduced overall cost of advanced and next generation superconducting motor. For advanced and next generation superconducting motor design, the opportunity exists to develop and implement real-time and continuous monitoring systems by integrating wireless and computational technique. Generally, condition monitoring and control of temperature is essential for managing the superconducting motor components, rotor and structures. In this research, development of advanced monitoring in low temperature and high speed operating environments offers the potential to greatly improve the control of harsh environments. In conventional method, slip rings have been used to acquire data from these sensors. However, the increase of sensors leads to vibration of the rotation axis and noise signals due to kinematics contact. In this study, the wireless data acquisition technique was employed to develop more stable monitoring system adequate for high speed rotating system.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.341-348
• /
• 2002

유지관리 계측은 터널 구조물의 지속적인 안전성 확인과 최적의 유지관리가 되도록 객관적이고 연속적인 자료제공을 목적으로 한다. 최근 들어 각종 터널에 적용하는 사례가 급속하게 증가되고 있으나, 현재까지 터널에서 장기간 측정된 계측실적도 적고, 합리적인 분석방법 연구도 전무한 실정이다. 본 연구에서는 장기간 계측이 수행된 지하철 풍화대 통과 터널의 계측결과를 회귀분석하여 터널의 최종 지보재인 콘크리트 라이닝의 응력과 철근응력의 상관관계를 파악하였다. 또한, 터널 콘크리트 라이닝의 응력과 안전성의 분석을 통하여 유지관리 계측 빈도 및 관리 기준치의 현장 적용성을 검토하였다.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.647-661
• /
• 2003

For continuous monitoring of atmospheric visibility in the city of Kwanaju, Korea, a transmissometer system consisting of a transmitter and a receiver was installed at a distance of 1.91 km across the downtown Kwanaju. At the transmitter site an integrating nephelometer and an aethalometer were also installed to measure the scattering and absorption coefficients of the atmosphere, respectively. At the receiver site. an URG PM$_{2.5}$ cyclone sampler and an URG-VAPS (Versatile Air Pollutant Sampler) with three filter packs and two denuders were used to collect both PM$_{2.5}$ and PM$_{10}$ samples at a 2-hour or 12-hour sampling interval for aerosol chemical analysis. Sulfate, organic mass by carbon (OMC), nitrate, elemental carbon (EC) components of fine aerosol were the major contributors to visibility impairment. Diurnal variation of visibility during best-case days showed rapid improvement in the morning hours, while it was delayed until afternoon during the worst-case days. Aerosol mass concentration of each aerosol component for the worst-case was calculated to be 11.2 times larger than the best-case for (NH$_4$)$_2$SO$_4$(NHSO), 19.0 times for NH$_4$NO$_3$ (NHNO), 2.2 times for OMC, respectively. Also result shows that elemental carbon and fine soil (FS) were 3.7 and 2.2 times more than those of best-case. respectively- Sum of total contributions of wet NHSO and NHNO to light extinction was calculated to be 301 Mm$^{-1}$ for the worst-case. However, sum of contributions by dry NHSO and NHNO was calculated to be 123 Mm$^{-1}$ for the best case. Mass extinction efficiencies of fine and coarse particles were calculated to be 5.8$\pm$0.3 $m^2$/g and 1.8$\pm$0.1 $m^2$/g, respectively.ely.

• Computers and Concrete
• /
• 제16권1호
• /
• pp.49-65
• /
• 2015

It is hard to guarantee the strict synchronization of all the jacking-up points in the integral jacking of a large-span continuous box girder bridge. This paper took the Hengliaojing Bridge as background, which need jacking up as an object with 295m length and more than 10,000tons weight, adopted 3D software to calculate the unsynchronized jacking-up working conditions, and studied the relationships between the unsynchronized vertical difference and the girder's deformation behaviour. The aim is to verify the maximum value of the unsynchronized vertical difference, and guide the construction and ensure safety. The monitoring system with its contents is introduced corresponding to the analysis. The results of the deck relative elevations prove that it is difficult to avoid the deck torsional deformation for jacking different; especially the side span shows more deformations for its smaller stiffness. The maximum difference is smaller than the limited value with acceptable stresses in the sections. The jacking heights of the pier in each construction step are controlled regularly according to the design. The shifting of the whole bridge in longitudinal direction is smaller than in transverse direction. The several beginning steps are the key to adjust their support reactions. This study is one parts of the fundamental research for the code "Technical specification for bridge jacking-up and reposition of China". The whole synchronous jacking project of the main bridge set a world record by the World Record Association for the whole bridge jacking project with the longest span of the world.

• 한국방재학회 논문집
• /
• 제4권1호
• /
• pp.51-56
• /
• 2004

본 연구는 전형적인 도심소재 중 소하천인 오산천 상류를 중심으로 수질변화 현상을 정확히 파악하기 위하여 24시간에 걸친 연속측정을 통해 수질의 변화를 조사하였고, 이러한 결과를 통하여 효율적인 하천관리 방향을 제시하였다. 오산천 수질의 연속조사의 결과로부터, 본류의 수질개선을 위해서는 다음과 같은 일들이 선행되어야 할 것으로 판단된다. 첫째, 본류 수질개선을 위해서는 유입지류의 효율적인 관리방안이 필요하다. 둘째, 하천 본류의 저질로부터 재용출 되는 오염을 방지하기 위한 대처방안이 필요하다. 본 연구에서는 수질저하를 방지하기 위해 단순한 조사만으로도 중 소하천의 효과적인 관리 방안을 제시했다. 따라서 하천에서의 연속적인 수질 모니터링은 하천수질 개선을 위해 중요하며, 나아가 하천환경에서 일어나는 물질순환 및 물질수지는 건전한 하천조성을 위하여 정확히 평가되어야 한다.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.709-715
• /
• 2011

Chattering in cutting operations are usually a cumbersome part of the manufacturing process in mechanical. Particular, machining performance such as that of the boring process is limited by cutting condition at the movable components. Among various sources of chatter vibration, detrimental point in cutting condition is found a mechanical condition on overhang. It limits cutting speed, depth, surface roughness and tool wear failure as result because the all properties are varying with the metal removal process. In this case, we have to observe the resonance frequencies of a boring bar for continuous cutting. In the established research, boring bar vibration of cutting system has been measured with the aid of accelerometer. However, the inherent parameters of internal turning operations are severely limit for the real time monitoring on accelerometers. At this point, this paper is proposed other method for real time monitoring during continuous cutting with optical fiber at the inside of boring bar. This method has been used a plastic fiber in the special jig on boring bar by based on experimental modal analysis. In this study, improvement of monitoring system on continuous internal cutting was attempted using optical fiber sensor of inside type because usually chattering is investigated experimentally measuring the variation in chip thickness. It is demonstrated that the optical fiber sensor is possibility to measure of chattering with real time in boring process.

• 문화기술의 융합
• /
• 제7권2호
• /
• pp.49-60
• /
• 2021

본 연구는 덕성여자대학교 비교과프로그램 품질관리를 위한 인증평가제의 도입을 검토하는 데에 목적을 두어 실시되었다. 연구 방법은 문헌 분석과 전문가 회의와 같이 두 가지의 절차를 병행하여 구성되었다. 연구 내용은 덕성여자대학교에서 학생들의 학습역량 강화 지원을 위하여 다양하게 운영되고 있는 비교과프로그램의 품질관리를 보다 공식화된 수준과 체계화된 흐름에 따라 시행하기 위한 인증평가제의 도입 관련 수반조건이 구성되었다. 연구 결과, 「비교과인증평가에관한내규」는 비교과프로그램의 상시 모니터링과 연차 성과평가 간 연계적 흐름을 실제화하는 데 주요한 시행 기반이 될 뿐 아니라, 덕성여자대학교를 비롯한 비교과통합관리 지원체계를 구축하고 있는 각 대학별로 공통 사항에 해당된다는 측면을 분석할 수 있었다.

• 대한한방내과학회지
• /
• 제45권2호
• /
• pp.303-313
• /
• 2024

Introduction: We describe the effects of Sosiho-tang decoction and insulin combination therapy, as well as the effect of integrated traditional Korean medicine therapy, using continuous glucose monitoring (CGM) in a diabetic patient complaining of a range of diabetic symptoms. Case report: A 24-year-old female presented with symptoms of diabetes, including weight loss, thirst, and polyuria, and was diagnosed with type 2 diabetes through blood tests, endocrine tests, and autoantibody tests. During hospitalization, the patient received insulin therapy and Sosiho-tang decoction concurrently, achieving normal blood glucose levels. After discharge, adhering to the Sosiho-tang decoction and CGM enabled the insulin dosage to be gradually reduced while maintaining normal blood glucose levels. Conclusion: Combination therapy with insulin and Sosiho-tang rapidly reduced hyperglycemia in the short term. CGM post-discharge allowed for observation of the patient's blood glucose levels. Ultimately, Sosiho-tang medication lowered blood glucose levels, reduced insulin requirements, and facilitated a reduction in the insulin dosage.