1 |
Roa, B. and Shin, Y. C., "A Comprehensive Dynamic Cutting Force Model of Chatter Prediction in Turning International," Journal of Machine Tools and Manufacture, Vol. 39, No. 10, pp. 1631-1654, 1999.
DOI
ScienceOn
|
2 |
Lee, H. T., "An Experimental Study on the Chatter Detection and Analysis using Accelerometer in Turning," Mechanical Engineering, A Master's Thesis of Chung-Buk National University, 2002.
|
3 |
Kang, D. H., "A Study of the Non-Contact Bill Counter using Optical Fiber Sensor," Mechanical Engineering, A Master's Thesis of Chung-Nam National University, 2006.
|
4 |
Song, D. S., Hong, J. H., Jeong, H. Y., Kang, D. H. and Kim, B. I., "A Study of the Boring Bar Vibration Measurement using Optical Fiber Sensor," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 4, pp. 107-113, 2009.
|
5 |
Handbook from Sandvik Coromant, "Metalcutting Technical guide," pp. A19-A25, 2005.
|
6 |
Kondo, E., Tanaka, H. and Kawagoishi, N., "Regenerative Chatter Vibrations of Work-piece in High Speed Cutting Process on Lathe," Asia-Pacific Vibration Conference, Vol. 9, No. 2, pp. 454-459, 1997.
|
7 |
Kim, J. S., Kang, M. C. and Park, S. K., "Dynamic Behavior of Boring Bar with Continuous System Analysis," Journal of the Korean Society of Precision Engineering, Vol. 11, No. 4, pp. 38-46, 1994.
|
8 |
Chun, S. H. and Ko, T. J., "A Study on the Dynamic Response Characteristics of Lathe Boring Bar," Journal of the Korean Society for Precision Engineering, Vol. 27, No. 8, pp. 62-69, 2010.
|
9 |
Andren, L., Hakansson, L., Brandt, A. and Claesson, I., "Identification of motion of cutting tool vibration in a continuous boring operation-correlation to structural properties," Mechanical System and Signal Processing, Vol. 18, No. 4, pp. 903-927, 2004.
DOI
ScienceOn
|
10 |
Ema, S. and Marui, E., "Suppression of chatter vibration of boring tools using impact dampers," International Journal of Machine Tools and Manufacture, Vol. 40, No. 8, pp. 1141-1156, 2000.
DOI
ScienceOn
|
11 |
Youn, J. W., "A Study on the Detection of Chatter Vibration using Cutting Force Measurement," Journal of the Korean Society of Machine Tool Engineers, Vol. 9, No. 3, pp. 150-159, 2000.
|
12 |
Mei, C., "Active regenerative chatter suppression during boring manufacturing process," Robotics and Computer-integrated Manufacturing, Vol. 21, No. 2, pp. 153-158, 2005.
DOI
ScienceOn
|
13 |
Cardi, A. A., Firpi, H. A., Bement, M. T. and Liang, S. Y., "Work-piece dynamic analysis and prediction during chatter of turning process," Mechanical Systems and Signal Processing, Vol. 22, No. 6, pp. 1481-1494, 2008.
DOI
ScienceOn
|
14 |
Moradi, H., Bakhtialr-Nejad, F. and Movahhedi, M. R., "Tunable vibration absorber design to suppress chatter in boring manufacturing process," International Mechanical Engineering Congress, Vol. 9, No. C, pp. 1943-1950, 2007.
|
15 |
Jung, S. K., Song, D. S., Jeong, J. and Hong, J. H., "A Study of the Boring Bar Internal Vibration Measurement using Optical Fiber Sensor," Proc. of the Korean Society for Precision Engineering Spring Conference, pp. 527-528, 2009.
|
16 |
Shin, W. C., "Design of multimode optical fiber displacement sensor by transmitting light irradiance distribution modeling," Mechanical Engineering, A Doctor's Thesis of Chung-Nam National University, 2006.
|