• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.31-38
• /
• 2011

As the percentage of permeable ground is reduced due to the increased impermeable roads of major cities, a heat island phenomenon can be dominantly observed, resulting in increased temperature. In addition, rainfall that would have been naturally absorbed and retained by the permeable ground is overflowed due to large volumes of run-off water, resulting in more sewer failures and increased erosion. In terms of permeable pavement system, block paving has been used anywhere as well as provides many years of service. The permeable block paving is an effective alternative to the more traditional asphalt or plain concrete for minor roads; furthermore, it looks a lot better than other pavements. In this study, the functional drainage evaluation of block paving was carried out, considering the usage of experimental sludge and wheel tracking test, in order to simulate the field condition of roads.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.6
• /
• pp.47-64
• /
• 2021

In this study, the annual and monthly groundwater recharge for the Sapgyo-cheon upstream basin in Chungnam Province was evaluated by water balance analysis utilizing WetSpass-M model. The modeling input data such as topography, climate parameters, LAI (Leaf Area Index), land use, and soil characteristics were established using ArcGIS, QGIS, and Python programs. The results showed that the annual average groundwater recharge in 2001 - 2020 was 251 mm, while the monthly groundwater recharge significantly varied over time, fluctuating between 1 and 47 mm. The variation was high in summer, and relatively low in winter. Variation in groundwater recharge was the largest in July in which precipitation was heavily concentrated, and the variation was closely associated with several factors including the total amount of precipitation, the number of days of the precipitation, and the daily average precipitation. This suggests the extent of groundwater recharge is greatly influenced not only by quantity of precipitation but also the precipitation pattern. Since climate condition has a profound effect on the monthly groundwater recharge, evaluation of monthly groundwater recharge need to be carried out by considering both seasonal and regional variability for better groundwater usage and management. In addition, the mathematical tools for groundwater recharge analysis need to be improved for more accurate prediction of groundwater recharge.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.217-223
• /
• 2018

Real-time controllability has been a major challenge that should be addressed to ascertain the practical usage of the management systems. In this regards, for the first time, we proposed and implemented an IoT(Internet of Things)-based water tank system to improve convenience and efficiency. The reservoir can be effectively controlled by notifying the user if the condition of the reservoir is unstable. The proposed system consists of embedded H/W unit for sensor data measuring and controling, application S/W for deployment of management server via web and mobile app, and efficient database structure for managing and monitoring statistics. And machine learning algorithms can be applied for further improvements of efficiency in practice.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.310-315
• /
• 2007

The FTL has been developed to be able to irradiate test fuels at the irradiation hole(IR1 hole) by considering its utility and user's irradiation requirements. FTL consists of In-Pile Test Section (IPS) and Out-of-Pile System (OPS). Test condition in IPS such as pressure, temperature and the water quality, can be controlled by OPS. For safety assurance IPS is designed to have dual stainless steel pressure vessel and OPS is composed of main cooling water system, emergency cooling water system, LMP(letdown, make-up, purification) system, etc. FTL Conceptual design was set up in 2001, basic design had completed including a design requirement, basic piping & instrument diagram (P&ID), and the detail design in 2004. In 2005, the development team carried out purchase and manufacture hardware and make a contract for construction work. FTL construction work began on August, 2006 and ended on March, 2007. After FTL development which is expected to be finished by 2008, FTL will be used for the irradiation test of the new PWR-type fuel and can maximize the usage of HANARO.

• Advances in concrete construction
• /
• v.2 no.1
• /
• pp.29-37
• /
• 2014

Increasing emphasis on energy conservation and environmental protection has led to the investigation of the alternatives to customary building materials. Some of the significant goals behind understaking such investigations are to reduce the greenhouse gasemissions and minimize the energy required formaterial production.The usage of concrete around the world is second only to water. Ordinary Portland Cement (OPC) is conventionally used as the primary binder to produce concrete. The cement production is a significant industrial activity in terms of its volume and contribution to greenhouse gas emission. Globally, the production of cement contributes at least 5 to 7 % of $CO_2$. Another major problem of the environment is to dispose off the fly ash, a hazardous waste material, which is produced by thermal power plant by combustion of coal in power generation processes. The geopolymer concrete aims at utilizing the maximum amount of fly ash and reduce $CO_2$ emission in atmosphere by avoiding use of cement to making concrete. This paper reports an experimental work conducted to investigate the effect of curing conditions on the compressive strength of geopolymer concrete prepared by using fly ash as base material and combination of sodium hydroxide and sodium silicate as alkaline activator.

• The Journal of Korean Academy of Prosthodontics
• /
• v.16 no.1
• /
• pp.17-21
• /
• 1978

The object of this study was to measure of the distortion of various dental waxes under condition simulating clinical usage. Eleven commercial product (table) including the inlay and baseplate waxes were tested, and compared in the study. Test specimens were prepared $5{\times}5{\times}65mm$. split brass mold. Placed this rod wax specimens and the brass wax distortion test mold into the water bath and tested the distortion values for waxes at $35^{\circ}C,\;40^{\cric}C,\;45^{\circ}C\;and\;50^{\circ}C$. Measured the distortion as the difference between the final (Df) and original (Do) distance between the ends of the specimen. Recorded Df, Do and Df-Do (Distortion) to the nearest 0.5mm. A minimum of five specimens were tested for each material. The following conclusions may be drawn from this study. 1) It can be seen that, a significant wax distortion was obtained with the temperature of forming the pattern, and the length of time and the temperature at which it was stored. 2) It was found that, when the storage time was increased, the wax distortion was correspondingly increased. At the sametime, the higher the storage time was employed, the distortion was obviously much greater. 3) It can be observed that the higher the temperature at which the wax was manipulated, the less was the resulting distortion upon storage.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.581-584
• /
• 2005

A district heating(DH) system supplies environmentally-friend heat and is appropriate for reduction of energy consumption and/or air pollutions. The objectives of this paper are to systematize data processing of transition temperature, investigate its effects on fatigue life of DH pipes and optimization for size of DH pipes. A relational database management system as well as reliable fatigue life evaluation procedures is established for Korean DH pipes. Also, since the prototypal evaluation results satisfied both cycle-based and stress-based fatigue criteria. Through the optimum design process, the cross section diminished 18.64% and the CUF diminished 23.35%. So, it can be used as useful information in the future for optimal design, operation and energy saving via setting of efficient condition and stabilization of water temperature.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.41-49
• /
• 2015

This study was performed to assess the antioxidant activity of Allium hookeri root extract (AHE) on lipid oxidation of raw sulfur-fed pork patties for 14 d of refrigerated storage. Different concentration of ethanol (0-100%) and time (1-12 h) were applied to determine the extraction condition. Water (0% ethanol) extraction for 1 h was selected as an optimal extraction condition of AHE for the following study showing the highest total phenolic content and total flavonoid content, as well as the strongest antioxidant activity. The 1% AHE (SP1), 3% AHE (SP2), and 0.05% ascorbic acid (SP3) were added into sulfur-fed pork patties against controls; SP0 (sulfur-fed pork patties with no AHE) and P0 (normal pork patties with no AHE). The pH values of P0 and SP0 significantly increased (p<0.05) than others on 14 d and redness of P0 showed the largest decrement during storage. P0 and SP0 showed higher production of conjugated dienes on d 7 than others (p<0.05). Thiobarbituric acid reactive substances (TBARS) values were decreased in proportion to the increased level of AHE on 14 d (p<0.05) resulting in higher TBARS values on P0 and SP0 (p<0.05) and the negative correlation between AHE level and TBARS were also demonstrated (r=-0.910, p=0.001). Therefore, the results suggest that AHE effectively retarded the lipid oxidation rate of sulfur-fed pork patties indicating the potential usage of AHE as a natural preservative.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.53-60
• /
• 2011

As Construction & Demolition(C&D) debris increase every year, a system has enforced for recycled aggregate made out of C&D debris, then recycled aggregate usage increased in construction field. But as environmental problem by alkalinity of recycled aggregate occurred, the study for lowering alkalinity of recycled aggregate is needed. In this study we made alkalinity reducing facility and installed in the C&D debris midterm-treat field. Then we certified effect of lowering alkalinity and quality of recycled aggregates before and after carbonation. As a result, the most effective carbonation condition is 30seconds in carbonation time, -50~100 kPa of reaction pressure with change of 3cycles. This condition made pH 9.33~9.8 of recycled aggregate possible. The quality of recycled aggregate after carbonation was better than before carbonation in terms of plasticity index, modified CBR, abrasion loss, sand equivalent, liquid limit, size distribution, density and water absorption.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.628-632
• /
• 2011

L-ribose has recently attracted interest as a starting material for antiviral drug. It could be obtained from L-arabinose by epimerization reaction. Epimerization reaction was carried out with molybdenium oxide or molybdic acid catalyst and methanol/water solution. Reaction temperature, methanol percentage, and catalyst kind were selected to find an optimum reaction condition. Ion exhange chromatography was used for separating epimerization reaction mixture, and then HPLC chromatogram of L-ribose fraction obtained to calculate the yield of the reaction. Shodex ion exchange HPLC column(Model SC1011) and Phenomenex Luna $NH_2$ HPLC column were compared to employ a convenient HPLC analysis. It was found that the usage of 20% methanol, $60^{\circ}C$, and 40 g/L molybdic acid gives the best reaction condition with a yield of 21%.