1 |
Barbosa, V.F., MacKenzie, K.J. and Thaumaturgo, C. (2000), "Synthesis and characterization of materials based on inorganic polymers of alumina and silica: Sodium polysialate polymers", Int. J. Inorganic Mater., 2(4), 309-317.
DOI
ScienceOn
|
2 |
Allouche, E.N., Vaidya, S. and Diaz, E.I. (2011), "Experimental evaluation of self cure geoplymer concrete for mass pour application", World of Coal Ash (WOCA) Conference (May 9-12), Denver, USA.
|
3 |
Bakharev, T. (2005a), "Resistance of geopolymer materials to acid attack", Cement Concrete Res., (Elsevier), 35(4), 658-670.
DOI
ScienceOn
|
4 |
Cheng, T.W. and Chiu, J.P. (2003), "Fire resistant geopolymer produced by granulated blast-furnace slag", Mineral Engineering (Elsevier), 15, 205-210.
|
5 |
Davidovits, J. (1991), "Geopolymers: Inorganic polymeric new materials", J. Thermal Anal., 37, 1633-1656.
DOI
ScienceOn
|
6 |
Bakharev, T. (2005b), "Durability of geopolymer materials in sodium and magnesium sulphate solutions", Cement Concrete Res. (Elsevier), 35(6), 1233-1246.
DOI
ScienceOn
|
7 |
Bakharev, T. (2005c), "Geoplymeric materials prepared using Class F fly ash and elevated temperature curing", Cement Concrete Res. (Elsevier), 35(5), 1224-1223.
DOI
ScienceOn
|
8 |
Davidovits, J. (1994a), "High-alkali cements for 21st century concretes in concrete technology - Past, present and future", Proceedings of V. Mohan Malhotra Symposium, Detroit, USA (Ed.: Mehta, P.K.), ACI SP- 144, 383-397.
|
9 |
Davidovits, J. (1994b), Properties of geopolymer cements, First Int. Conf. Alkaline Cements and Concretes, Kiev, Ukraine, SRIBM Kiev State Technical University.
|
10 |
Davidovits, J. (1999), Chemistry of geopolymeric systems, An International Conference on Geopolymers, France.
|
11 |
Duxson, P., Fernandez, J.A., Provis, J.L., Lukey, G.C., Palomo, A. and van Deventer (2007), "Geopolymer technology- The current state of the art", J. Mater. Sci., 42 (9), 2917-2933.
DOI
ScienceOn
|
12 |
Fernandez, J.A., Palomo, A. and Lopez, H.C. (2006), "Engineering properties of alkali activated fly ash concrete", ACI Mater. J., 103(2), 106-112.
|
13 |
Hardjito, D. and Rangan, B.V. (2005), "Development and properties of low calcium fly ash based geopolymer concrete", Research Report GC-1, Curtin University of Technology, Perth, Australia.
|
14 |
IS: 10262- 2009, Recommended guideline for concrete mix design, Bureau of Indian Standards, New Delhi.
|
15 |
Lee, W.K.W and Deventer, J.S.J. (2002), "The effects of inorganic salt contamination on the strength and durability of geopolymers", Colloids and Surfaces Phsicochem. Eng. Aspects, 115-126.
|
16 |
IS: 1199-1959 (reaffirmed 2004), Methods of sampling and analysis of concrete, Bureau of Indian Standards, New Delhi.
|
17 |
IS: 3812-2013, Testing of physical and chemical properties of fly ash, Bureau of Indian Standards, New Delhi.
|
18 |
IS: 383- 1970 (reaffirmed 2002), Indian standard code of practice for specification for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi.
|
19 |
Malhotra, V.M. (1999), "Making concrete greener with fly ash", ACI Concrete Int., 21(5), 61-66.
|
20 |
McCaffrey, R. (2002), "Climate change and the cement industry", Global Cement and Lime Magazine (Environmental Special Issue), 15-19.
|
21 |
Mehta, P.K. (2001), "Greening of the concrete industry for sustainable development", ACI Concrete Int., 24(7), 23-28.
|
22 |
Mustafa Al Bakri, A.M., Kamarudin, H., Bnhussain, M., Rafiza, A.R. and Zarina, Y. (2012), "Effect of Na2SiO3/ NaOH ratios and NaOH molarities on compressive strength on fly ash based geopolymer", ACI Marerials J., 109(5), 503-508.
|
23 |
Neville, A.M. (2000), Properties of Concrete, Addison -Wesely Longman Ltd. (Fourth Ed.).
|
24 |
Palomo, A., Grutzeck, M.W. and Blanko, M.T. (1999), "Alkali-activated fly ashes: A cement for the future", Cement Concrete Res. (Elsevier), 29(8), 1323-1329.
DOI
ScienceOn
|
25 |
Sofi, D., Deventer, J.S.J., Mendis, P.A. and Lukey, G.C. (2006), "Engineering properties of inorganic polymer concretes (IPCs)", Cement Concrete Res., 37, 251-257.
|
26 |
Phair, J.W. and Deventer, J.S. (2001), "Effect of silicate activator pH on the leaching and material characteristic of waste - based inorganic polymer", Mineral Eng. (Elsevier), 14(3), 289-304.
DOI
|
27 |
Rahier, H., Simons, W., Mele, B. and Biesemans, M., (1997), "Low-temperature synthesized aluminosilicate glasses, Part III - Influence of the composition of the silicate solution on production, structure and properties", J. Mater. Sci., 32, 2237-2247.
DOI
|
28 |
Ramchandran, S., Ramakrishnan, V. and Johnston, D. (1992), "Roll of high volume fly ash in controlling alkali-aggregate activity", Am. Concrete Inst. SP, 132, 591-614.
|
29 |
Jaarsveld, J.G.S., Deventer, J.S.J. and Luckey, G.C. (2002), "The effect of composition and temperature on the properties of fly ash and Kaolinite based geopolymers", Chem. Eng. J., 89(1), 63-73.
DOI
|
30 |
Wallah, S.E. and Rangan, B.V. (2006), Low Calcium Fly Ash Based Geopolymer Concrete: Long Term Properties, Research Report GC 2, Curtin University of Technology, Perth, Australia.
|
31 |
Wang, B.M and Wang, L.J. (2005), "Development of studies and applications of activation techniques of fly ash", Proceedings International Workshop on Sustainable Development and Concrete Technology, Beijing, August 23, 159-169.
|
32 |
Xu, H. and Deventer, J.S.J. (2000), "The gopolymerisation of alumino- silicate minerals", Int. J. Mineral Proc., 59(3), 247-266.
DOI
ScienceOn
|