• Clean Technology
• /
• v.25 no.2
• /
• pp.140-146
• /
• 2019

Flammable substances, such as organic solvents, are commonly used in laboratories and industrial processes. The flash point of flammable liquid mixtures is a very important parameter for characterizing the ignition and explosion hazards, and the flash points of mixtures of $C_2{\sim}C_3$ alcohols and 2,2,4-trimethylpentane were measured in the present study. The 2,2,4-trimethylpentane is an important component of gasoline and is frequently used in the petroleum industry as a solvent. Lower flash point data were measured for the binary systems {ethanol + 2,2,4-trimethylpentane}, {1-propanol + 2,2,4-trimethylpentane}, and {2-propanol + 2,2,4-trimethylpentane}. The flash point measurements were carried out according to the standard test method (ASTM D3278) using a Stanhope-Seta closed cup flash point tester. The measured flash points were compared with the predicted values calculated using Raoult's law and also following $G^E$ models: Wilson, Non-Random Two Liquid (NRTL) and UNIversal QUAsiChemical (UNIQUAC). These models were able to predict the experimental flash points for different compositions of {$C_2{\sim}C_3$ alcohols + 2,2,4-trimethylpentane} mixtures with minimal deviations. The average absolute deviation between the predicted and measured lower flash point was less than 1.28 K. A minimum flash point behaviour was observed in all of the systems as in the many observed cases for the hydrocarbon and alcohol mixtures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.137-143
• /
• 2019

Foxtail millet (Setaria italica L.) and proso millet (Panicum miliaceum L.) were not the major cereal crops in Korea. Although, they are attracting attention due to their nutritional excellence. This study focused on nutritional composition of Korean foxtail millet and proso millet varieties. The protein content of foxtail millet is lower than that of proso millet, and the fat content tends to be higher. Especially, Daname (foxtail millet) and Geumsilchal (proso millet) showed the highest protein content. Also, among these, Chohwangme (foxtail millet) and Manhongchal (proso millet) were the highest fat content, respectively. In the essential amino acids content results, these crops were rich in leucine, phenylalanine and valine. Also, lipids were composed of palmitic acid (C16:0), stearic acid (C18:0), oleic acid (C18:1), linoleic acid (C18:2), linolenic acid (C18:3), arachidic acid (C20:0), gadoleic acid (C20:1), and behenic acid (C22:0). Especially, linoleic acid content was the highest.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.127-137
• /
• 2019

Zr electrorefining is demonstrated herein using Zirlo tubes in a chloride-fluoride mixed molten salt in the presence of $AlF_3$. Cyclic voltammetry reveals a monotonic shift in the onset of metal reduction kinetics towards positive potential and an increase in intensity of the additional peaks associated with Zr-Al alloy formation with increasing $AlF_3$ concentration. Unlike the galvanostatic deposition mode, a radial plate-type Zr growth is evident at the top surface of the salt during Zr electrorefining at a constant potential of -1.2 V. The diameter of the plate-type Zr deposit gradually increases with increasing $AlF_3$ concentration. Scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX) and X-ray photoelectron spectroscopy (XPS) analyses for the plate-type Zr deposit show that trace amount of Al is incorporated as Zr-Al alloys with different chemical compositions between the top and bottom surface of the deposit. Addition of $AlF_3$ is effective in lowering the residual salt content in the deposit and in improving the current efficiency for Zr recovery.

• Ocean and Polar Research
• /
• v.41 no.3
• /
• pp.169-181
• /
• 2019

The purpose of this study is to develop geochemical tracers to identify a specific source desert of mineral dust in China using the published data. In addition, we tested the applicability of these tracers to wet-deposits and soil samples collected in Jeju, Korea. Because of similarity in trace elemental compositions of mineral dust from the major arid regions in China, such as Taklimakan, West Ordos (Badain Jaran), East Ordos (Mu Us and Hobq), East Northern China (Horqin), West Northern China (Gurbantunggut), and Chinese Loess Plateau, there has been limited to the use of geochemical data for source identification. Here we propose the four (4) plots using combination of seven (7) geochemical variables as a source indicator to distinguish one from other source regions in China: $\frac{Y}{Tb_N}$ vs. $\frac{Th}{{\Sigma}REE_N}$, $\(\frac{La}{Gd}\)_N$ vs. $\frac{Y}{{\Sigma}REE_N}$, $\frac{Th}{Tb_N}$ vs. $\frac{Y}{Nd_N}$, and $\frac{Th}{Tb_N}$ vs. $\(\frac{Ce}{Ce}\)_N^*$, where $_N$ and $\(\frac{Ce}{Ce}\)_N^*$ stand for values normalized to Post-Archean Average Shale composition and Ce anomaly, respectively. Mineral dusts from aforementioned six major deserts are distinguished one from the others by the combined use of these variables. Jeju rock and soil samples form a separate domain from Chinese mineral dusts in all four plots. In contrast, most of Jeju dust samples were comparable with the West Ordos desert (Badain Jaran) domain, indicative of strong influence of Badain Jaran dust in Jeju in spring season when the mineral dust was collected. A weak positive Ce anomaly in Jeju samples implies minimal local contribution. Our study suggests that the combination of $\frac{Y}{Tb_N}$ vs. $\frac{Th}{{\Sigma}REE_N}$, $\(\frac{La}{Gd}\)_N$ vs. $\frac{Y}{{\Sigma}REE_N}$, $\frac{Th}{Tb_N}$ vs. $\frac{Y}{Nd_N}$, and $\frac{Th}{Tb_N}$ vs. $\(\frac{Ce}{Ce}\)_N^*$ can be used to identify a specific source region of mineral dust in China as well as Jeju mineral particles.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.12
• /
• pp.1897-1902
• /
• 2018

Objective: This study was conducted to evaluate the effect of homo or hetero fermentative inoculants on fermentation quality and aerobic stability of sweet potato vine (SPV) silage containing Italian ryegrass hay as moisture absorbent. Methods: The SPV was harvested at 15% dry matter, mixed with Italian ryegrass hay at 1:1 ratio on a fresh weight basis, and chopped to 3 to 5 cm length. After then, the chopped forage mixture was ensiled into 20-L mini silos in quadruplicate for 7, 48, and 100 days after application of microbial inoculants at $1.2{\times}10^5$ colony forming units (cfu)/g of forage following: no inoculant (CON), Lactobacillus plantarum as a homo fermentative (LP), Lactobacillus buchneri as a hetero fermentative (LB), and mixture of LP and LB at 1:1 ratio as a combo fermentative (MIX). Results: The LP and MIX silages had lowest pH (p<0.001) on 7 and 48 days, while MIX and CON silages had greatest lactate concentrations (p<0.05) on 7 and 48 days, respectively. Acetate concentrations were highest (p<0.01) in LB and MIX silages on 7 days, and in LB silage on 48 days, while lactate to acetate ratios were lowest (p<0.001) in LB silages. The chemical compositions and nutrient digestibility of silage ensiled for 100 days was not affected by inoculants. On 100 days of ensiling, LB silage had lowest (p<0.01) lactate concentration and lactate to acetate ratio, but highest acetate concentration. Aerobic stability was highest (p<0.001) in LB silage followed in MIX silage. On contrast, LB silage had lowest (p<0.05) lactic acid bacteria and mold. Conclusion: The results indicated that application of LB solely had a better effect on aerobic stability than not only LP, but also MIX. However, LP application did not show beneficial effects from the viewpoints of fermentation quality and aerobic stability compared to CON.

• Plant Breeding and Biotechnology
• /
• v.6 no.4
• /
• pp.404-412
• /
• 2018

The influenza neuraminidase (NA, E.C. 3.2.1.18), an antiviral, has been the target of high pharmaceutical companies due to its essential role in viral replication cycle. Perilla frutescens (P. frutescens) is used in traditional Chinese medicine for various diseases, such as cold due to wind-cold, headache and cough. In this context, four major polyphenolic compounds including rosmarinic acid-3-O-glucoside (1), rosmarinic acid (2), luteolin (3), and apigenin (4) isolated from P. frutescens were evaluated for their inhibitory effect on recombinant virus H1N1 neuraminidase (rvH1N1 NA). Among the test compounds, rosmarinic acid and luteolin inhibited the rvH1N1 NA with an $IC_{50}$ of 46.7 and $8.4{\mu}M$, respectively. The inhibition kinetics analyzed by the Dixon plots indicated that rosmarinic acid and luteolin were noncompetitive inhibitors and that the inhibition constant, $K_I$, was established as 43.9 and $14.3{\mu}M$, respectively. In addition, 578 genetically diverse accessions and 39 cultivars of P. frutescens were analyzed using HPLC to characterize the diversity of polyphenolic composition and concentration. The individual and total compositions exhibited significant difference (P < 0.05), especially rosmarinic acid which was detected as the predominant metabolite in all accessions (58.8%) and cultivars (62.8%). Yeupsil and Sangback cultivars exhibited the highest rosmarinic acid ($3,393.5{\mu}g/g$) and luteolin ($383.3{\mu}g/g$) content respectively. YCPL177-2 with the high concentration ($889.8{\mu}g/g$) of luteolin may be used as a genetic resource for breeding elite cultivars.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.89-101
• /
• 2019

The variation of content of 12 soybean seed isoflavone components was determined in the aglycone, glucoside, malonylglucoside and acetylglucoside groups of 44 Korean soybean cultivars grown in 2016 as well as in 2017. The total isoflavone content of the 44 cultivars averaged at $2935.4{\mu}g/g$ and was in the range of 950.6 to $5226.3{\mu}g/g$ for two years. Malonylglucoside group averaged at $2437.2{\mu}g/g$ with the highest proportion of isoflavone composition (83.0%). Significant differences were observed between cultivars, years and their interactions for both the total isoflavone and each composition group contents (P < 0.0001); however, no year-wise differences were observed for daidzein and genistin. The broad-sense heritability ($h^2$) within the set of 44 Korean soybean cultivars was as high as 0.93 for the total isoflavone content and was in the range of 0.8-0.92 for each composition group of isoflavone except for acetylglucoside. The total isoflavone content in cultivar group for soy-sprout was higher ($3850.4{\mu}g/g$) than that for the other cultivar groups of soy-paste and tofu ($3082.8{\mu}g/g$), black or green soybean cooked with rice ($2345.8{\mu}g/g$), and early maturity group ($1298.6{\mu}g/g$). The total isoflavone content of 'Sowonkong', a soybean cultivar for soy-sprout, was the highest ($5226.3{\mu}g/g$). In the cultivar group for soy-paste and tofu, the average isoflavone contents of 'Daepung', 'Daepung2ho', 'Saegeum', 'Uram', and 'Jinpung' were higher than $4000{\mu}g/g$. With the exception of small seeded cultivars with low isoflavone contents such as 'Sohwang' and 'Socheongja', the seed size and total isoflavone content were significantly negatively correlated in 2016 and 2017, respectively ($r=-0.47^{**}$ and $-0.49^{**}$). The number of days of growth from flowering to maturity did not affect the variations observed in isoflavone content.

• Ocean and Polar Research
• /
• v.41 no.2
• /
• pp.89-97
• /
• 2019

Long chain plant waxes (n-alkanes, n-alkanoic acids, and n-alcohols) and their carbon isotopic compositions (${\delta}^{13}C$) in geologic archives are valuable tools for paleovegetation reconstruction. However, the sensitivity of different plant wax constituents to vegetation shift is not well understood. This study explores controls on the variation in ${\delta}^{13}C$ values of long-chain n-alkanes ($C_{27}$ to $C_{33}$) and n-alkanoic acids ($C_{26}-C_{30}$) in the Gulf of Mexico core sediments (ODP 625B) near the Mississippi River delta. n-Alkanoic acids' ${\delta}^{13}C$ values were higher than those of n-alkanes by 1-2‰ on average and such a pattern is the opposite from their isotope fractionation observed in living plants: 1-2‰ smaller in n-alkanes than n-alkanoic acids. We attribute this offset to contributions from aquatic plants or microbes that produce high concentrations of $^{13}C-enriched$ long-chain n-alkanoic acids. The sensitivity of n-alkanes and n-alkanoic acids to vegetation and climate varied among chain lengths. The $n-C_{33}$ alkanes were most sensitive to $C_4$ grassland expansion among n-alkane homologues, while no specific trend was observed in n-alkanoic acids. This is due to the similarity in n-alkanoic acid concentrations between $C_3$ and $C_4$ plants by homologues and low terrestrial plant-derived n-alkanoic acid contributions to the sediments. The results of this study suggest that long chain n-alkanoic acids' ${\delta}^{13}C$ values in sediments may be influenced by contributions from different sources such as aquatic plants or microbial inputs and therefore interpretations regarding this matter should be cautiously formulated. We suggest that there is a need for further studies on characterizing long-chain n-alkanoic acids ($C_{26}-C_{34}$) in aquatic plants and microbes from various climates and environments in order to investigate their production and integration into sedimentary archives.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.102-121
• /
• 2010

Three bronze bells excavated from the Hoeamsa temple site were investigated for their microstructures and chemical compositions in an effort to understand the technology applied in fabrication, which may represent the related industry established in the early Joseon period. The result shows that the bells were cast from alloys of approximately 85% copper-8% tin-7% lead. The chemical analysis for ten trace elements shows that they were all kept below 0.3 weight %, suggesting that the alloys were made of relatively well-refined copper, tin and lead. The presence of sulfur and iron indicates that chalcopyrite or chalcocite may have been used in the smelting of copper. Evidence has been found that the bells were cast by pouring the liquid metal from the top of the sand molds that were set up in an upright position. No additional treatments, thermal or mechanical, other than a little grinding were applied upon the completion of casting. After the shaping process, a balancing plate was attached to the top of the bell using a steel connection ring. The connection assembly was then fixed to the main body by using molten bronze as a solder. The surface inscription was found carved using different techniques. The differences in the order of strokes and the calligraphic style indicate that the carving was carried out by more than one master. In the absence of documentary evidence on past bronze technology, the present bronze bells with known chronology, provenance and the main agent of production, prove to be a rare and valuable archaeological material for the understanding of the related technology in use in the early Joseon period.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.2
• /
• pp.87-102
• /
• 2019

Pallancata Ag mine is located at the Ayacucho region 520 km southeast of Lima. The geology of mine area consists of mainly Cenozoic volcanic-intrusive rocks, which are composed of tuff, andesitic lava, andesitic tuff, pyroclastic flow, volcano clasts, rhyolite and quartz monzonite. This mine have about 100 quartz veins in tuff filling regional faults orienting NW, NE and EW directions. The Ag grades in quartz veins are from 40 to 1,000 g/t. Quartz veins vary from 0.1 m to 25 m in thickness and extend to about 3,000 m in strike length. Quartz veins show following textures including zonation, cavity, massive, breccia, crustiform, colloform and comb textures. Wallrock alteration features including silicification, sericitization, pyritization, chloritization and argillitization are obvious. The quartz veins contain calcite, chalcedony, adularia, fluorite, rutile, zircon, apatite, Fe oxide, REE mineral, Cr oxide, Al-Si-O mineral, pyrite, sphalerite, chalcopyrite, galena, electrum, proustite-pyrargyrite, pearceite-polybasite and acanthite. The temperature and sulfur fugacity ($f_{s2}$) of the Ag mineralization estimated from the mineral assemblages and mineral compositions are ranging from 118 to $222^{\circ}C$ and from $10^{-20.8}$ to $10^{-13.2}atm$, respectively. The relatively low temperature and sulfur-oxygen fugacities in the hydrothermal fluids during the Ag mineralization in Pallancata might be due to cooling and/or boiling of Ag-bearing fluids by mixing of meteoric water in the relatively shallow hydrothermal environment. The hydrothermal condition may be corresponding to an intermediate sulfidation epithermal mineralization.