• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.301-310
• /
• 2006

A series of laboratory tests was carried out for analyzing compaction characteristics of hydraulic fill soils(or hydraulically filled soils). Hydraulic fill soils were settled down by the weight of soil particle itself in water and consolidated by the extraction of water from the soil structures. Water content and dry unit weight were observed as the depth of sedimentation and consolidation soil. It was found from the result that the optimum water content $(W_{cpt})$ of the maximum unit weight$(\gamma_{dmax})$ is higher than that of laboratory compaction test(KS F 2312 A method). It was due to difference in compaction energy and compaction effect between two methods. And the maximum dry unit of hydraulic fill soil is smaller than that of laboratory compaction test. Especially in terms of compaction effect, the maximum relative compaction degrees$(R_{cmax})$ of Seamangum dredged sand, river sand and mixed sand, half and half of dredged and river sands, were 85%, 91% and 86%, respectively. It means that the compaction effect can be $85\sim91%$ of the maximum unit weight in laboratory compaction test.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.171-178
• /
• 2004

In recent years, the objective information for the environmental effect of architecture will be furnished to the designer and inhabitant in order to minimize an excessive energy consumption and environmental loads by buildings. In addition, an environmental friendly architectural certification program for a residence, office, and school facilities have been operated to spread and supply environmental friendly architecture. Most of the environmental friendly architectural certification programs proposed in the country are focused on the aspect of the physical environments of architecture in its certification ranges. In the case of a foreign country, however, the certification ranges of an environmental friendly architectural certification program for the school facilities among the programs will be extended not only to the standards for architectural design, environmental aspect, and maintaining and management basis by considering the characteristics of educational effects for students but also to the curriculum, policy of environment, and roles of local community facilities by reflecting a social aspect. Therefore, this study proposes a design and evaluation method by considering an ecological element that will satisfy the requirement for educational well-being that includes not only the requirement for school facilities according to the development of a new curriculum like a space for teaching and learning but also the improvement of the quality of educational environments and the objective of an ecological school.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.99-116
• /
• 2020

The article provides information on ceramic / nanostructured materials which are suitable for solid oxide fuel cells (SOFCs) working between 500 to 1000℃. However, low temperature solid oxide fuel cells LTSOFCs working at less than 600℃ are being developed now-a-days with suitable new materials and are globally explored as the "future energy conversion devices". The LTSOFCs device has emerged as a novel technology especially for stationary power generation, portable and transportation applications. Operating SOFC at low temperature (i.e. < 600℃) with higher efficiency is a bigger challenge for the scientific community since in low temperature regions, the efficiency might be less and the components might have exhibited lower catalytic activity which may result in poor cell performance. Employing new and novel nanoscale ceramic materials and composites may improve the SOFC performance at low temperature ranges is most focused now-a-days. This review article focuses on the overview of various ceramic and nanostructured materials and components applicable for SOFC devices reported by different researchers across the globe. More importance is given for the nanostructured materials and components developed for LTSOFC technology so far.

• Journal of Agricultural Extension & Community Development
• /
• v.4 no.1
• /
• pp.293-304
• /
• 1997

Studies about nutritional status, dietary behaviors and food preferrence as well as health status were performed to 110 homo-living elderly in rural area, Asan. The results obtained by questionnaires and interviews for 24-hr dietary recall were as follows. They were 68.6 years of average age. The weights were 53.8kg and 51.4kg of male and female, respectively and BMI 22.0 and 23.5. Their prevalence of obesity and high blood pressure were 65.5% and 60.5%, respectively, which seemed to be less than ones in large cities. More than 50% of the elderly thought their health as good or so-so. Physical health conditions by check list were indicated as 2.26 points, which meant the listed physical symptoms observed seldom(3pts) to sometimes(2pts). Evaluations on food frequency and seasoning tendency resulted in superior quality of female elderly's meals to that of male ones. Average daily intake of energy, protein, vitamin A, riboflavin and ascorbic acid of the elderly in rural area were lower than Korean RDA for the aged $60{\sim}69$ and riboflavin was found to be the least sufficient nutrient. Their monthly expenditure, meal-accompany and skipped meals were significantly related to daily nutrient intake.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.184-188
• /
• 1999

Noise regulation of heavy construction machinery is getting stricter： 3 dB per every 4 year in European community. To meet this requirement many engineers have adopted the enclosing structures with thick absorbing materials and small opening, This increases internal temperature of the enclosure which have engine systems such as electric equipment that are vulnerable to heat, and engine block and muffler that can be regarded as heat sources. So noise control engineers have to consider a coupling problem: combining heat balance and noise reduction. This paper describes this approach by introducing simple heat transfer theory and SEA. The enclosing system of the loader whose enclosing structure consists of two rooms is investigated to show the validity of this method. The results represent that the simple heat transfer theory can be useful to estimate cooling performance when it is linked together by the back pressure theory in duct system. and the radiated noise can also be estimated by the SEA. Therefore a designer can use these approaches to define the opening ratio of an enclosure and the mass flow rate of air considering radiating noise.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.111-124
• /
• 2014

Decentralized water supply systems, treating the water in users'vicinity, cutting down the distribution system, utilizing the alternative water resources(rainwater harvesting, water reclamation and reuse and so on.) and saving energy and other resources, could be categorized into POU(Point-Of-Use), POE(Point-Of-Entry) and community small scale system. From the literature review, we could thought that decentralized water supply system and hybrid system(integrating centralized and decentralized water supply system within urban water management) might have strengthening comparative advantages to centralized system with respect to: (1) water security, (2) sustainability, (3) economical affordability. Even though it is difficult to derive and quantify direct benefit advantages from decentralized and hybrid system in comparison with centralized system, (1) operational cost reduction, (2) assurance for safe and stability water supply and (3) greenhouse gas reduction can be expected from successful establishment of the former.

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.109-114
• /
• 2013

In Cukhe, a village located in the outskirts of Hanoi, Vietnam, people suffer from a shortage of high-quality water due to an arsenic contaminated supply water resource. We installed catchments, filters and settled tanks in the existing rainwater harvesting facility to improve water quality, and ten portable rainwater tanks to provide good-quality drinking water to the poor households and kindergartens in the dry season. The triple bottom line considerations, as well as the environmental, economic, and social impacts of the rainwater harvesting (RWH) systems are examined. RWH is a sustainable method to obtain good-quality drinking water at low cost and with little energy expenditure. Education of the system also encourages that continuation of the system and expansion can lead into economic prosperity, as the safe drinking water can be sold to the community. Hence, RWH is a unique proposal as sustainable drinking supply water for improving the lives and health of residents in Cukhe and other sites where water supply sources are contaminated.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.447-458
• /
• 2012

This study was carried out to evaluation of biomass generation mechanisms and to propose the estimation method of biomass generation. Agricultural by-product biomass is generated during crops cultivation and after harvest. However these are not uniformly generated yearly and these depending on the seasons. For planning of biomass utilization, accurate information of the biomass resources is needed, especially characteristic and productivity of biomass are necessary. Agricultural by-product biomass are generated in a wide area being scattered and it is one of the major reason why agricultural biomass utilization is not activated compared with other waste biomass. In this study, estimation and evaluation biomass generation is achieved in specific spatial and temporal boundary, A-city in Gyeongi-do and september to November respectively. Quantity and quality of by-product biomass show big difference depending on the crop species and cultivation periods and these difference bring up that accurate biomass estimation should be considered during planning of biomass utilization and technology selecting for biomass converting to energy and other forms.

• Journal of Technology Innovation
• /
• v.14 no.3
• /
• pp.155-182
• /
• 2006

Science & Technology(S&T) personnel have been Playing a major role to develop our country since S&T is the most important factor in enhancing national competitiveness in the 21st century, As S&T activities are done by S&T personnel, it is essential to improve the welfare of S&T personnel in order to increase the performance of S&T activities. We should motivate them to pour their efforts and energy in S&T activities. However, the issue of S&T personnel's welfare has not been discussed sufficiently not only in academic research, but also in actual S&T policies. It has caused many social problems, for example, avoidance of S&T areas by young generation, low social recognition of S&T community, and so on. Under this background, this paper aims at investigating how to effectively improve S&T personnel's welfare. In this paper, we will suggest the 'Comprehensive Welfare Town for S&T personnel' as an effective instrument for improving of S&T personnel's welfare. In particular, we will discuss the detailed aspects of the comprehensive welfare town : objectives, strategies and budgets.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.200-202
• /
• 2008

동해 울릉분지에서는 시추선 RemEtive를 사용하여 UBGH-X-01 가스하이드레이트 탐사가 2007년에 실시되었다. 본 연구에서는 천부 가스하이드레이트가 확인된 UBGH1-10 정점에서 무인잠수정(Quantam WROV)을 사용하여 획득된 푸쉬코어와 해저지형 분석을 수행되었다.UBGH1-10 정점은 seismic chimneys의 탄성파 특성이 발달된 지역이다. 이곳에서는 해저표면으로부터 수 m 하부에서 가스하이드레이트가 발견되었다. 이 정점은 수 m 높이의 얕은 둔덕들이 무인잠수정에 부착된 비디오 카메라에 의해서 관찰되었다.이곳에서 채취된 길이 약40 cm의 푸쉬코어는 생물교란된 뻘질 퇴적물로 구성되어 있으며, 가스하이드레이트와 chemosynthetic community는 관찰되지 않았다. 푸쉬코어는 X-ray fluorescence scanner를 사용하여 퇴적물의 26가지 원소 조성을 분석하였다. UBGH1-10 정점의 산화환원환경은 Mo/Al과 Mn/Ti 원소비를 이용하여 천부 가스하이드레이트가 발견되지 않은 UBGH1-9와 UBGH1-1 정점과 대비하였다. 이 정점의 일차생산력은 Ba/Al 원소비를 이용하여 다른 정점과 대비하였다. 천부 가스하이드레이트가 발견된 UBGH1-10 정점은 활발한 가스방출과 관련된 생물집단 서식 또는 자생광물 형성의 흔적이 발견되지 않으며, 퇴적물에서도 산화환원환경과 일차생산력의 큰 차이가 관찰되지 않는다.