• International Journal of Control, Automation, and Systems
• /
• 제5권4호
• /
• pp.471-478
• /
• 2007

In this paper, an optimal Wiener-Hopf decoupling controller formula is obtained which is expressed in terms of rational matrices, thereby readily allowing the use of state-space algorithms. To this end, the characterization formula for the class of all realizable decoupling controller is formulated in terms of rational functions. The class of all stabilizing and decoupling controllers is parametrized via the free diagonal matrices and the optimal decoupling controller is determined from these free matrices.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.515-520
• /
• 2002

This paper begin a new approach in the water-gate controller using radio communication. The dissertation is on the controllable device development of water-gate in the remote distance from water-gate trough the transceiver by radio communication. The proposed water-gate control device is simple in structure, an suitable for implementation of water-gate control in the remote distance. The remote controller water-gate device inspected the up and down motion of water-gate through the LCD displayer, so that it was very safety driving about the surroundings information, over loading and position of water-gate, and so on.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2328-2330
• /
• 2003

This paper presents a new design methodology of networked control system using CAN(Controller Area Network). Feedback control systems having control loops closed through a network are called networked control systems. We design CAN nodes which can transmit control and monitoring data through network bus and apply these to networked control system design. We analyze the variation of stability property according to network-induced delay and determine a proper sampling period of networked control system that preserves stability performance. The results of the experimental example validate effectiveness of our networked control system.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.932-941
• /
• 2014

In this paper, a simulation model for 7-phase BLDC motor drives for an Autonomous Underwater Vehicles (AUV) is proposed. A 7-phase BLDC motor is designed and the electrical characteristics are analyzed using FEA program and the power electronics drives for the 7-phase BLDC motor are theoretically analyzed and the actual implementation has been accomplished using Matlab Simulink. PI controller and fuzzy controller are compared for verifying the validity of the proposed model and the informative results are described in detail. Especially A fuzzy controller is used to characterize 7-phase BLDC motor, drive systems under normal and fault operating conditions.

• Journal of Information Science Theory and Practice
• /
• 제10권spc호
• /
• pp.123-134
• /
• 2022

Existing network cryptography systems are threatened by recent developments in quantum computing. For example, the Shor algorithm, which can be run on a quantum computer, is capable of overriding public key-based network cryptography systems in a short time. Therefore, research on new cryptography systems is actively being conducted. The most powerful cryptography systems are quantum key distribution (QKD) and post quantum cryptograph (PQC) systems; in this study, a network based on both QKD and PQC is proposed, along with a quantum key management system (QKMS) and a Q-controller to efficiently operate the network. The proposed quantum cryptography communication network uses QKD as its backbone, and replaces QKD with PQC at the user end to overcome the shortcomings of QKD. This paper presents the functional requirements of QKMS and Q-Controller, which can be utilized to perform efficient network resource management.

• 융합신호처리학회논문지
• /
• 제11권1호
• /
• pp.53-62
• /
• 2010

최근 전자제어 차량을 비롯한 각종 산업용 임베디드 시스템은 분산형 다중 마이크로 컨트롤러 시스템으로 진화하고 있다. 이에 따라 제어의 효율성이 큰 객체지향형 시스템 구축이 용이하고, 통신의 높은 안정성과 신뢰성이 보장되는 표준적 CAN(Contro11er Area Network) 통신 규약이 필요하게 되었다. 기존의 범용 프로세서를 이용한 CAN 통신 인터페이스는 하드웨어 아키텍처가 고정되어 있기 때문에 다양한 응용에 적용함에 있어 유연성이 결여되는 등의 많은 한계를 가진다. 본 논문에서는 FPGA 기반 CAN 통신 인터페이스 시스템을 설계 구현하고, 기존의 AT90CAN128 컨트롤러와의 통신 성능을 모니터링 하여 시스템의 기능과 성능을 검증하였다. 본 연구의 CAN 인터페이스 시스템은 IFI_Nios_II_Advanced CAN IP 코어와 NIOS II 소프트 코어 프로세서를 사용하여 설계 되었다. 이에 따라 개발된 CAN 통신 인터페이스는 다양한 FPGA 기반 응용 시스템 개발에 재사용 릴 수 있고, 저비용, 소형화 그리고 저전력화를 달성할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.29-31
• /
• 2009

Optimal efficiency control of synchronous reluctance motor(SynRM) is very important in the sense of energy saving and conservation of natural environment because the efficiency of the SynRM is generally lower than that of other types of AC motors. This paper is proposed an efficiency optimization control for the SynRM which minimizes the copper and iron losses. The design of the speed controller based on fuzzy-neural networks (FN)-PI controller that is implemented using fuzzy control and neural networks. There exists a variety of combinations of d and q-axis current which provide a specific motor torque. The objective of the efficiency optimization control is to seek a combination of d and q-axis current components, which provides minimum losses at a certain operating point in steady state. It is shown that the current components which directly govern the torque production have been very well regulated by the efficiency optimization control scheme. The proposed algorithm allows the electromagnetic losses In variable speed and torque drives to be reduced while keeping good torque control dynamics. The control performance of the proposed controller is evaluated by analysis for various operating conditions. Analysis results are presented to show the validity of the proposed algorithm.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.583-584
• /
• 2022

드론의 발전으로 인해 드론의 임무는 다양한 분야에서 수행되며, 광범위한 영역에서 비가시권(BVLOS, Beyond Visual Line Of Sight) 비행한다. 대부분 드론은 무선 주파수(RF, Radio Frequency) 통신을 통해 운용되고 약 1-2 km의 제한된 반경에서만 비행이 가능하다. 이를 극복하기 위해 본 논문에서는 RF와 LTE (Long Term Evolution)를 활용하여 BVLOS에서 임무를 수행하는 드론을 조종하기 위한 다중 통신 프로토콜 기반 드론 조종 시스템을 제안한다. 제안한 시스템은 크게 조종부와 드론부로 이루어진다. 조종부는 조종기에서 발생한 하나의 조종 신호를 RF와 LTE를 통해 전송한다. 드론부는 RF와 LTE를 통해 이중으로 전송된 조종 신호를 통신 프로토콜의 우선순위에 따라 분류하여 FC (Flight Controller)로 전달한다. 제안한 조종 시스템을 통해 RF 통신 거리 한계를 극복하고 통신 연결 불능 상황을 방지할 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제10권1호
• /
• pp.69-74
• /
• 2010

현재 CAN(controller Area Network)통신은 노이즈에 강인한 시리얼통신으로 전자모듈에 많이 사용하고 있다. 특히, CAN통신은 자동차 전자제어모듈, 엔진제어유닛, 센서모듈 등 자동차 부분에 많이 사용되는 방식 이지만 CAN 통신의 연결노드 우선순위와 오류가 낮아 공장자동화 라인에도 적용되고 있다. CAN통신은 기본적으로 전기 노이즈에 강인하여 적용가능한 분야가 다양하다고 사료된다. 본 연구에서는 High-Speed, Full-CAN에서 2개의 CAN Node를 사용하여 임베디드 시스템용으로 오류 검출이 가능한 CAN통신 인터페이스를 설계 하였다.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.347-353
• /
• 2012

In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.