• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.96-102
• /
• 2004

The diesel particulate filter(DPF) is effective for particulate removal from diesel engine under a variety of conditions, and then the regeneration strategies is very important in the aspects of engine fuel consumption and engine durability. This paper addresses the changes of Peugeot 406 vehicle engine parameters(fuel injection timing, period, rail pressure, emissions exhaust temperature so on) during DPF regeneration. additionally, checked the soot loading mass with mileage and the change of fuel consumption and performance with ash accumulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1045-1050
• /
• 2005

A set of design factors that should be considered during rail transit system development in proposed. As the current trend in the rail transit development emphasizes its role as a medium through which the interaction between the city environment and people takes place, the factors of harmony, color, characteristics, identity, and communication should be considered in the railway design. It's important to ensure that there exist harmony between the design and the civic environment, the influence of color on people is properly considered, the car design possesses distinct characteristics, and that the sense of common identity as well as effective communication is fostered between the system and people it serves. Several cases from various countries are presented to illustrate the points raised in the paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.158-163
• /
• 2006

The study of this study is to suggest the advanced vision of LRT O&M through comparing the domestic and japanese. Currently local government attract a private capital to construct the LRT competitively. It was investigated the O&M field participation of Light Rail Transit by the Seoul metro which operates Seoul subway 1,2,3,4 lines at this time. But, according to the restricted operation experiences in domestic, Japanese companies which operates a Light Rail Transit in Japan were analysed using several statistics. It were compared with operation plan of domestic execution design phase of representative 4 lines. The analysis gives us some points in common and suggestions that are very important and prerequisite for advancing seoul metro into LRT O&M business.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.190-195
• /
• 2008

Surge proof equipment is an installation to make surge flow on the ground promptly so as to reduce surge-related damage on infrastructure, not to prevent surge from falling down on infrastructure directly. Compared with classical line individual earth, High speed line common earth has higher surge characteristic and plays a significant role to prevent infrastructure damage and injuries from surge, or short circuit accident between 25kV catenary and rail. In this paper, we analyzed the case of accident that caused communication/signaling system impaired while a tractor crossing level crossing at Honam line; in addition, we examined the accident reduction measures to minimize injury and property damage from cutting accidents with respect to common earth network.

• 한국산업정보학회논문지
• /
• 제19권3호
• /
• pp.1-7
• /
• 2014

본 논문은 자동시험장비 (ATE) 시스템의 측정 회로에 사용하는 비교기 설계에 관한 것이다. 이 비교기 전체 블럭은 연속 형의 고속 비교기, 차동차이증폭기, 그리고 출력 단으로 구성되어 있다. 연속 형의 고속 비교기는 높은 주파수(1~800MHz) 및 넓은 범위(0~5V)의 입력신호를 받아들이기 위해, 고속의 rail-to-rail 증폭기를 첫 단에 두었다. 또한 동작 속도를 높이기 위하여 고속의 전치증폭기와 래치를 순차적으로 구성하였다. 두 시험 소자(DUT) 간 출력 신호 차이를 검출함에 있어, 공통 신호와 차동 신호 차이를 모두 감지하기 위하여 차동차이 증폭기(DDA)를 사용하였다. 이 비교기는 $0.18{\mu}m$ BCDMOS 공정을 사용하여 칩으로 구현되었으며, 5mV의 신호 차이를, 800 MHz의 신호까지 비교가 가능하다. 구현된 칩 면적은 $620{\mu}m{\times}830{\mu}m$이다.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.111-120
• /
• 2014

The aim of this study is to develop an integrated urea-SCR catalytic filter system for reducing soot and $NO_X$ emissions simultaneously in diesel engines. In this study, the characteristics of exhaust emissions relative to reactive activation temperature under four kinds of engine loads are experimentally investigated by using a four-cycle, four-cylinder, direct injection type, water-cooled turbo intercooler ECU common-rail diesel engine with the integrated urea-SCR $MnO_2-V_2O_5-WO_3/TiO_2/SiC$ catalytic filter system operating at three kinds of engine speeds. The urea-SCR reactor is used to reduce $NO_X$ emissions, and the catalytic filter system is used to reduce soot emissions. The reactive activation temperature is very important for reacting a reducing agent with exhaust emissions. The reactive activation temperatures in this experiment is applied to 523, 573 and 623 K. The fuel is sprayed by the pilot and main injections at the variable injection timing between BTDC $15^{\circ}$ and ATDC $1^{\circ}$ according to experimental conditions. It is found that the $NO_X$ conversion rate is the highest as 83.9% at the reactive activation temperature of 523 K in all experimental conditions of engine speed and load, and the soot emissions shown by the average reduction rate of approximately 93.3% are almost decreased below 0.6% in all experimental conditions regardless of reactive activation temperatures. Also, the THC and CO emissions by oxidation reaction of Mn, V and Ti are shown in the average reduction rates of 70.3% and 38% regardless of all experimental conditions.

• 대한전자공학회논문지SD
• /
• 제44권6호
• /
• pp.19-27
• /
• 2007

본 논문에서는 공급전압 변화에 둔감한 Gbps급 저전력 LVDS I/O회로를 설계하였다. 제안된 LVDS I/O는 1.8 V, $0.18\;{\mu}m$ TSMC 공정을 이용하여 설계, 시뮬레이션 및 검증하였다. 설계된 LVDS I/O회로는 송신단과 수신단을 포함한다. 제안하는 송신단은 phase splitter와 SC-CMFB를 이용한 출력버퍼로 구성된다. phase splitter의 출력은 공급 전압이 변화하여도 $50{\pm}2%$의 duty cycle을 가지며 $180{\pm}0.2^{\circ}$의 위상차를 가진다. 출력 버퍼는 SC-CMFB를 이용하여 허용 가능한 $V_{CM}$ 전압 값인 $1.2{\pm}0.1V$을 유지하도록 설계하였다. $V_{OD}$전압 또한 허용범위에서 최소값인 250 mV를 갖도록 설계하여 저전력 동작이 가능하도록 구성하였다 수신단은 38 mV의 히스테리시스 전압값을 가지면서 DC옵셋 전압값이 $0.2{\pm}2.6 V$로 넓은 공통 모드전압 범위가 가능하도록 설계하였고 공급전압 변화에도 rail-to-rail로 복원할 수 있는 기능을 가지고 있다. 또한, 수신단은 1 GHz에서 38.9 dB의 높은 전압 이득을 갖도록 설계하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.138-146
• /
• 2007

The 'Fault' has been common interests to the structural geologists, geotechnical engineers and civil engineers. The 'Fault' is very important factor to evaluate to the geotechnical stability. In this paper, geological origin and classification of faults with structural geological features are described. These geological characteristics of faults are useful to understand and detect of faults for engineering practice.

• 수산해양교육연구
• /
• 제12권2호
• /
• pp.142-151
• /
• 2000

The studies on the electronic control fuel injection system for a DI diesel engine have done for reducing the exhaust emission and improving fuel consumption. The electronic control fuel injection system is classified into a common rail system, a unit injector system and a high pressure injection system. The characteristics of these systems are largely depends on the operating characteristics of its solenoid that have high speed on-off operation. In order to improve these characteristics of fuel injection system, it is necessary to design the optimal shape of solenoid and select the input method of its power source. It was proposed HELENOID, COLENOID, DISOLE, and Multipole Solenoid in the studies of design for the optimal shape of solenoid. The studies on the energizing method, input method for power of solenoid were dealt with the conventional energizing method, the chopping method and the pre-energizing method. In order to find out the high response characteristics of solenoid, it is necessary to test the performance of optimally designed solenoid with a new energizing method. In this paper, the solenoid of multi-pole type with plat armature and its power control unit to control input current by the chopping method designed, and its response tests were performed according to its energizing conditions. As a result, the maximum input current for solenoid was controlled by the period of first stage exciting current and chopping duty ratio of control stage exciting current, and the fastest "on" time was able to get 0.46ms. The conditions of fastest "on" time was 0.3ms for first stage exciting current, 0.16ms for control exciting current and 75% for chopping duty ratio.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.89-95
• /
• 2013

In this work, the evaluation of swirl nozzle injector performance was conducted by investigating effective area ($A_{eff}$), injection mass ($m_{inj}$), injection rate ($Q_{inj}$), and injection delay ($t_{delay}$) under various test conditions. To achieve these, fuel injection analysis system which was composed of fuel supply system, injection system, and control system was installed. At the same time, the swirl nozzle that had 12 orifice hole with $120^{\circ}$ injection angle was used in this work. It was revealed that the difference of injection mass ($m_{inj}$) between base and swirl nozzle injector increased as the injection pressure ($P_{inj}$) and energizing duration ($t_{eng}$) decreased under the same test conditions. The maximum injection rate ($Q_{inj}$) of swirl nozzle injector was higher than base nozzle injector about 2~5%. The injection performance of swirl nozzle was better than base nozzle at low injection pressure ($P_{inj}$) and short energizing duration ($t_{eng}$) conditions.