• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.555-560
• /
• 2023

기존 아민 수용액 기반 CO₂ 포집 공정을 산업적으로 적용할 경우 CO₂ 탈거 및 용매 재생에 따른 재생 에너지가 크다는 문제점을 갖고 있다. 본 논문은 CO₂에 대한 높은 흡수 용량과 함께 흡수제에 포함된 물의 조성을 낮춤으로써 재생 에너지를 저감할 수 있는 저수계 흡수제를 제안하였다. 이를 위해 본 연구에서는 디아민인 MAPA (3-methylaminopropylamine)와 함께 물의 일부를 대신하여 물에 비해 CO₂에 대한 물리적 용해도가 높고 비열이 낮은 NMP (N-methyl-2-pyrrolidone)를 흡수제에 도입하였다. 흡수제의 CO₂에 대한 흡수 용량(α_rich)과 순환 흡수 용량(Δα) 및 흡수 속도는 충전탑을 이용하여 측정하였다. 2.5M의 MAPA를 포함한 흡수제를 사용했을 경우 NMP가 10 wt% 포함된 경우에 최대 순환 흡수 용량을 얻을 수 있었다. 총괄물질전달 계수는 NMP의 농도가 증가함에 따라 증가하였다. 그러나 0.5보다 더 높은 CO₂ 로딩 값에서는 NMP의 농도 증가에 따른 물질전달 계수의 증가 폭이 줄어들었다. lean 로딩 값이 낮은 경우에는 점성에 의한 물질전달 저항이 낮아서 NMP 첨가에 따라 총괄 물질전달 계수가 증가하나 로딩 값이 증가함에 따라 흡수제의 점도가 증가하면서 CO₂와 MAPA의 확산도가 낮아지며 이에 따라 총괄 물질전달계수가 급격히 감소하였다.

• 멤브레인
• /
• 제28권3호
• /
• pp.187-195
• /
• 2018

본 연구에서는 상전이법을 이용하여 P(VDF-co-HFP) 분리막의 구조를 조절하였다. Macrovoid 없는 구조를 얻기 위하여 다양한 조건에서 비용매유도상전이(NIPS) 공법으로 분리막을 제막하였으나 고분자의 낮은 결정화 속도로 인해 macrovoid가 생성된다는 것을 관측하였다. 이를 극복하기 위해 증발유도상전이법(EIPS)과 증기유도상전이법(VIPS)을 도입하였으며 NIPS공법과 함께 제막되었을 때 이상적인 구조를 얻을 수 있다는 것을 확인하였다.

• 분석과학
• /
• 제24권2호
• /
• pp.94-104
• /
• 2011

본 연구에서는 양쪽성 메조 다공성 실리카를 다양한 조건(용매, 계면활성제와 올리고머의 량, 용액의 pH)에서 합성하였다. 메조 다공성 실리카를 사용하여 염소 소독으로 인해 음용수 중에 미량 존재하는 변이원성 물질인 MX (3-chloro-4-(dichloromethyl)-5-hydroxy-2-(5H)-furanone)의 흡착에 관한 특성을 연구하였다. 소수성과 친수성의 양쪽성 폴리우레탄 올리고머를 사용하여 합성된 메조다공성 실리카의 경우 뛰어난 흡착특성을 나타내었다. 그리고 보조 계면 활성제의 경우에는 비이온성이며 분자량이 큰 폴리 에틸렌 프로필렌 옥사이드(PEO-PPO)를 사용하여 합성된 메조 다공성 실리키가 가장 좋은 흡착 특성을 보였다.

• 약학회지
• /
• 제44권6호
• /
• pp.511-520
• /
• 2000

Various bupivacaine-loaded microspheres were prepared from poly (d,l-lactide) (PLA) or poly (d,l-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. PLA and PLGA microspheres were prepared by w/o/w and w/o/o multiple emulsion solvent evaporation, respectively. The effects of process conditions such as emulsification speed, emulsifier type, emulsifier concentration and internal/external phase ratio on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency was higher in the microspheres prepared by w/o/o multiple emulsion than that by w/o/w multiple emulsion method, because the solubility of bupivacaine HCI was decreased in oil phase compared with water phase. The prepared microspheres had an average diameter between 1 and $2\;{\mu}M$ in all conditions of two methods. In morphology studies the PLA microspheres showed an irregular shape and smooth surface, but PLGA microspheres had a spherical shape and smooth surface. The release pattern of the drug from microspheres was evaluated on the basis of the burst effect and the extent of the release after 24h. The in vitro release of bupivacaine HCl from microspheres showed a large initial burst release and $60{\sim}80%$ release within one day in all conditions of two methods. The extents of the burst release against PLA and PLGA microspheres were $30{\sim}50%$ and $50{\sim}80%$ within 20min, respectively. This burst release seems to be due to the smaller size of microspheres and the solubility of drug in water.

• 대한화학회지
• /
• 제34권2호
• /
• pp.123-129
• /
• 1990

메탄올-, 에탄올-, 아세토니트릴-, 아세톤-물 등의 혼합용매에서 $trans-[Cr(en)_2Br_2]^+$착이온의 반응속도상수를 20, 25, 30 및 35$^{\circ}C$에서 분광광도법으로 구하였다. 반응속도상수는 온도가 증가함에 따라 증가하고 공용매의 조성이 증가함에 따라 감소하였다. 속도상수는 공용매의 유전상수의 역수값과 아무런 관계도 보이지 않았다. Grunwald-Winstein식의 m값은 메탄올-, 에탄올-, 아세토니트릴- 및 아세톤-물 혼합용매에서 각각 0.109, 0.103, 0.101 및 0.095이었다. 물과 공용매에서 착이온이 초기상태에서 전이상태로 진행되는 자유에너지사이클로부터 전이상태의 용매화가 속도에 지배적인 영향을 미친다는 것을 알 수 있었다. 위의 결과로부터 이 착이온의 수화반응메카니즘은 Id메카니즘으로 진행된다고 추정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.272-272
• /
• 2010

We have fabricated alumina thick films by inkjet printing technology. Two different types of ink system were formulated in order to understand their evaporation behaviors and their evaporation effects on the powder distribution on, the surface during inkjet-printed alumina thick films. Single solvent system was formulated with N,N-dimethylformamide(DMF), which led to coffee ring effects which non-uniformly distributed alumina particles on the substrate during the ink evaporation. However, Co-solvent system which consists of both Water and DMF produced relatively uniform distribution of the particles on the substrate. We believe that these two different distributions of alumina particles are attributed to the ink fluid flow directions in the ink droplets ejected from the different ceramic ink system. We have modulated inkjet parameters such as dot-to-dot distance, line-to-line distance, jetting velocity and jetting drop size in order to find out the optimum condition for the printing of alumina thick films from two different ink systems. The surface roughness, microstructures and dielectric properties of these inkjet-printed alumina thick films were investigated.

• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.311-316
• /
• 2016

$Ni(OH)_2$ hollow spheres have been prepared by solvent displacement crystallization using a micro-injection device, and the effect of process parameters such as concentration and the relative ratio of the injection speed of the precursor solution, which is an aqueous solution of $NiSO_4{\cdot}6H_2O$, to isopropyl alcohol of displacement solvent have been investigated. The crystal phases after NaOH treatment are in the ${\beta}-phase$ for all process parameters. A higher concentration of $NiSO_4{\cdot}6H_2O$ aqueous solution is injected by a micro-injection device and bigger $Ni(OH)_2$ hollow spheres with a narrower particle size distribution are formed. The crystallinity and hardness of the as-obtained powder are so poor that hydrothermal treatment of the as-obtained $Ni(OH)_2$ at $120^{\circ}C$ for 24 h in distilled water is performed in order to greatly improve the crystallinity. It is thought that a relative ratio of the injection speed of $NiSO_4{\cdot}6H_2O$ to that of isopropyl alcohol of at least more than 1 is preferable to synthesize Ni(OH)2 hollow spheres. It is confirmed that this solution-based process is very effective in synthesizing ceramic hollow spheres by simple adjustment of the process parameters such as the concentration and the injection speed.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.201-207
• /
• 2019

Tungsten heavy alloys (W-Ni-Fe) play an important role in various industries because of their excellent mechanical properties, such as the excellent hardness of tungsten, low thermal expansion, corrosion resistance of nickel, and ductility of iron. In tungsten heavy alloys, tungsten nanoparticles allow the relatively low-temperature molding of high-melting-point tungsten and can improve densification. In this study, to improve the densification of tungsten heavy alloy, nanoparticles are manufactured by ultrasonic milling of metal oxide. The physical properties of the metal oxide and the solvent viscosity are selected as the main parameters. When the density is low and the Mohs hardness is high, the particle size distribution is relatively high. When the density is high and the Mohs hardness is low, the particle size distribution is relatively low. Additionally, the average particle size tends to decrease with increasing viscosity. Metal oxides prepared by ultrasonic milling in high-viscosity solvent show an average particle size of less than 300 nm based on the dynamic light scattering and scanning electron microscopy analysis. The effects of the physical properties of the metal oxide and the solvent viscosity on the pulverization are analyzed experimentally.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1155-1158
• /
• 2010

Microwave-assisted Michael reaction between EMME and various amines such as diphenylamine, 4-methyl-N-phenylbenzenamine, N-phenylnaphthalen-1-amine, dihexylamine, diisopropylamine, and 4-nitrobenzenamine were described. Solvent-free conditions on alumina as solid support in the presence of $K_2CO_3$ catalysts gave moderate to good yields (55 - 93%) of diethylmalonate analogues having enamine moieties under focused microwave irradiation.

• 한국분말재료학회지
• /
• 제6권2호
• /
• pp.132-138
• /
• 1999

A new binder system and debinding process for low carbon residue in the injection molding of Nd(Fe, Co)B powder are investigated. In the injection molding of magnetic materials, it is demanded to reduce carbon residue which deteriorates their magnetic properties. The binder system developed is composed of polyethylene glycols (PEGs) and polypropylene (PP). PEG was selected as a major binder is component to be extracted in a molecular state by solvent extraction in ethanol, which step would leave no residue. PP was selected as a minor binder component to be subsequently removed by thermolysis which step would leave carbon residue. The behaviors of solvent extraction with the variations of PEG molecular weight, temperature, and time were examined. The dependency of residual carbon content on thermolysis atmosphere was also studied. Opened pore channels introduced in a green body by the solvent extraction and microstructures of the sintered magnets were observed using SEM.