• Journal of the Korean Geotechnical Society
• /
• v.35 no.10
• /
• pp.47-66
• /
• 2019

A parametric numerical analysis according to diameter, length, and N values of soil was conducted for the PHC pile socketed into weathered rock through sandy soil layers. In the numerical analysis, the Mohr-Coulomb model was applied to PHC pile and soils, and the contacted phases among the pile-soil-cement paste were modeled as interfaces with a virtual thickness. The parametric numerical analyses for 10 kinds of pile diameters were executed to obtain the load-settlement relationship and the axial load distribution according to N-values. The load-settlement curves were obtained for each load such as total load, total skin friction, skin friction of the sandy soil layer, skin friction of the weathered rock layer and end bearing resistance of the weathered rock. As a result of analysis of various load levels from the load-settlement curves, the settlements corresponding to the inflection point of each curve were appeared as about 5~7% of each pile diameter and were estimated conservatively as 5% of each pile diameter. The load at the inflection point was defined as the mobilized bearing capacity ($Q_m$) and it was used in analyses of pile bearing capacity. And SRF was appeared above average 70%, irrespective of diameter, embedment length of pile and N value of sandy soil layer. Also, skin frictional resistance of sandy soil layers was evaluated above average 80% of total skin frictional resistance. These results can be used in calculating the bearing capacity of prebored PHC pile, and also be utilized in developing the bearing capacity prediction method and chart for the prebored PHC pile socketed into weathered rock through sandy soil layers.

• The Korean Journal of Archival Studies
• /
• no.16
• /
• pp.97-146
• /
• 2007

Those days when people used paper to make up and manage all kinds of documents in the process of their jobs are gone now. Today electronic types of documents have replaced paper. Unlike paper documents, electronic ones contribute to the maximum job efficiency with their convenience in production and storage. But they too have some disadvantages; it's difficult to distinguish originals and copies like paper documents; it's not easy to examine if there is a change or damage to the documents; they are also prone to alteration and damage by the external influences in the electronic environment; and electronic documents require enormous amounts of workforce and costs for immediate measures to be taken according to the changes to the S/W and H/W environment. Despite all those weaknesses, however, electronic documents increasingly account for more percentage in the current job environment thanks to their job convenience and efficiency of production costs. Both the government and private sector have made efforts to come up with plans to maximize their advantages and minimize their risks at the same time. One of the methods is the Authorized Retention Center which is described in the study. There are a couple of prerequisites for its smooth operation; they should guarantee the legal validity of electronic documents in the administrative aspects and first secure the reliability and authenticity of electronic documents in the technological aspects. Responding to those needs, the Ministry of Commerce, Industry and Energy and the Korea Institute for Electronic Commerce, which were the two main bodies to drive the Authorized Retention Center project, revised the Electronic Commerce Act and supplemented the provisions to guarantee the legal validity of electronic documents in 2005 and conducted researches on the ways to preserve electronic documents for a long term and secure their reliability, which had been demanded by the users of the center, in 2006. In an attempt to fulfill those goals of the Authorized Retention Center, this study researched technical standard for electronic record information package of the center and applied the ISO 14721 information package model that's the standard for the long-term preservation of digital data. It also suggested a process to produce and manage information package so that there would be the SIP, AIP and DIP metadata features for the production, preservation, and utilization by users points of electronic documents and they could be implemented according to the center's policies. Based on the previous study, the study introduced the flow charts among the production and progress process, application methods and packages of technical standard for electronic record information package at the center and suggested some issues that should be consistently researched in the field of records management based on the results.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.3-46
• /
• 2010

Digital records management is one whole system in which many social and technical elements are interacting. To maintain the trustworthiness, the repository needs periodical audit and certification. Thus, individual electronic records management agency needs toolkit that can be used to self-evaluate their trustworthiness continuously, and self-assess their atmosphere and system to recognize deficiencies. The purpose of this study is development of self-certification toolkit for repositories, which synthesized and analysed such four international standard and best practices as OAIS Reference Model(ISO 14721), TRAC, DRAMBORA, and the assessment report conducted and published by TNA/UKDA, as well as MoRe2 and current national laws and standards. As this paper describes and demonstrate the development process and the framework of this self-certification toolkit, other electronic records management agencies could follow the process and develop their own toolkit reflecting their situation, and utilize the self-assessment results in-house. As a result of this research, 12 areas for assessment were set, which include (organizational) operation management, classification system and master data management, acquisition, registration and description, storage and preservation, disposal, services, providing finding aids, system management, access control and security, monitoring/audit trail/statistics, and risk management. In each 12 area, the process map or functional charts were drawn and business functions were analyzed, and 54 'evaluation criteria', consisted of main business functional unit in each area were drawn. Under each 'evaluation criteria', 208 'specific evaluation criteria', which supposed to be implementable, measurable, and provable for self-evaluation in each area, were drawn. The audit and certification toolkit developed by this research could be used by digital repositories to conduct periodical self-assessment of the organization, which would be used to supplement any found deficiencies and be used to reflect the organizational development strategy.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.193-208
• /
• 2021

The characteristics of the microcrack lengths(①), microcrack spacings(②) and Brazilian tensile strengths(③) related to the six directions of rock cleavages(H2~R1) in Geochang granite were analyzed. First, the 18 cumulative graphs for the above three major factors representing unique characteristics of the rock cleavages were made. Through the general chart for these graphs classified into three planes and three rock cleavages, the 28 parameters on the length, spacing and Brazilian tensile strength have been determined. The results of correlation analysis among these parameters are summarized as follows. Second, the above parameters were classified into six groups(I~VI) according to the sorting order on the magnitude of parameter values among three rock cleavages and three planes. The values of parameters belonging to group I and II are in order of R(rift) < G(grain) < H(hardway) and H < G < R. The values of the 8 parameters on the length of line(os₂, 𝚫s, 𝚫L and oS^mean), the exponent(λ_L^mean and λ_S^mean), the slope(a^mean) and the anisotropy coefficient (An^mean) are in order of R < G < H and H'(hardway plane) < G'(grain plane) < R'(rift plane). Third, the noticeable differences in distribution patterns among the six types of charts for three planes and three rock cleavages are as follows. From the chart for three planes, the values of 𝚫L, 𝚫s and 𝚫σ_t, corresponding to the distance between two points where the two fitting lines meet on the X-axis, increase in the order of R' < H' < G'. In particular, the two graphs of R2 and G2 related to the length and Brazilian tensile strength are almost parallel to each other and show the distribution characteristics of hardway plane. Among the graphs related to the Brazilian tensile strength, the overall shape for hardway plane is similar to that for grain. From the chart for three rock cleavages, the slopes of the graphs related to the length increase in the order of R < G < H, while those of the graphs related to the spacing and Brazilian tensile strength decrease in the order of R < G < H. Lastly, the characteristics of variation among the six rock cleavages, the three planes and the three rock cleavages were visualized through the correlation chart among the above parameters from this study.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.2
• /
• pp.116-125
• /
• 2020

Objectives : Self-poisoning is the leading cause of visits to the emergency departments after a suicide attempts. This study is aimed to compare the patient characteristics according to the category of drugs ingested by the patients who attempted suicide. Methods : All medical charts were retrospectively reviewed from patients who visited the emergency center, at Seoul Medical Center, due to intentional self-poisoning from April of 2011 to July of 2019. We investigated the information regarding the subtype and quantity of the intoxication drug, how it was obtained, suicidal history, and psychiatric history, as well as, sociodemographic information. Variables were compared between prescription drug (PD) and non-prescription drug (NPD) poisoning groups. Results : The mean age of the NPD poisoning group was significantly lower than that of the PD poisoning group. The patient ratio of those enrolled in national health insurance and living with spouses were significantly higher in the NPD poisoning group. Compared to the NPD poisoning group, the PD poisoning group had a higher incidence of mental illnesses, underlying diseases and ratio of involuntary visit to the emergency department. Among the prescription drugs, the benzodiazepine poisoning group had a higher rate of self-prescription than the non-poisoning group, while the zolpidem poisoning group had a higher rate of the using someone else's prescription than other drugs. Each single drug poisoning group (benzodiazepine, zolpidem, and antidepressant single-agent) had a higher rate of no mental illness than each of the mixed-poisoning group. Conclusions : Guidelines for regulating non-prescription drugs are needed as a matter of suicide prevention. Also, this study suggests that clinicians need to be careful when issuing prescriptions and should suicidal risk according to patients' characteristics, duration of follow-up and type of drug packaging.

• Journal of the Korean earth science society
• /
• v.41 no.6
• /
• pp.557-574
• /
• 2020

The purpose of this study is to analyze the cause of high PM2.5 mass concentrations in Cheongju for the period of non-Asian dust days using the weather chart, the stream lines at 850 hPa, the backward trajectory, and the weather and air quality model. As a result of analyzing the time series of PM2.5 concentrations and weather charts for the episodic days in Cheongju, the weather patterns were shown in related to long-range transport of PM2.5 from China or surrounding areas. In fact, in the PM2.5 time series, 60-80 ㎍ m-3, which is more than 2-3 times higher than the concentration attributed to Cheongju activities, was observed as a background concentration related to long-range transport. The distribution of high PM2.5 concentration was typically dependent on the locations of the high and low pressures above the ground while the upper jet stream passed through the Korean Peninsula. Consequently, the high PM2.5 concentration in Cheongju is due to massive air pollutants in the form of smog originated from industrial, household and energy combustion sources of Beijing and other nearby regions of China. These air pollutants move along a fast zonal wind caused by the atmospheric pressure arrangement. high concentration of PM2.5 in Cheongju City is because the mass of air pollutants in the form of smog generated from industrial, household and energy combustion origins in Beijing or other nearby regions of China move along a fast wind speed zone according to the atmospheric pressure arrangement of long-distance transportation. Air pollutants including PM2.5 show an M-shaped pattern that passes through the topography of the Cheongju basin from north to south as a belt or band-shaped pollutant. The ground high pressure according to the above-ground high pressure expansion area and cut-off low or low pressure arrangement, or the bands in the form of river stems appear in a gradual incremental pattern that changes into a U-shape under the influence of the wind.

• Journal of the Daesoon Academy of Sciences
• /
• v.37
• /
• pp.263-295
• /
• 2021

Until recently, academic consensus held that Zhou Dunyi's Taijitu (Taiji Diagram) originated from Cantongqi. However, a new debate has arisen wherein some scholars question that theory and related theories. They criticize these previous theories because the books and charts used as evidence in those theories were published after the lifetime of Zhou Dunyi, and this disqualifies their influence on his thought. However, identifying certain authors as being of a slightly later period than Zhou Dunyi does not definitively answer whether or not Zhou Dunyi's diagram was based on Cantongqi. I approached this problem from a different perspective. Zhou Dunyi's Taijitu is based on the system of taiji (Taiyi), yin-yang, and the five movements. Consequently, the formation of this system should be traced back historically. In the process of tracing it back, I intended to explain that the main character of Cantongqi is closely related to the formation of the system of taiji (Taiyi), yin-yang, and the five movements. The system of taiji (Taiyi), yin-yang, and the five movements was first established as a religious theological system in the Han Dynasty. In this process, yin-yang and the five movements were combined by Dong Zhongshu, and the five movements were introduced by Han Dynasty scholars as a method of interpreting the I-ching. However, Han Dynasty scholars did not form this system. In the late Han Dynasty, Cantongqi adopted the theological system of yin-yang and the five movements to theoretically form the system of taiji (Taiyi), yin-yang, and the five movements. Cantongqi was able to form this system because of the logic that yin-yang is the essence of the I-ching. Cantongqi does not have the same schematic as Taijitu. However, the system of taiji (Taiyi), yin-yang, and the five movements appears and extracts the components that make up Taijitu. Therefore, I do not think we should hastily agree with the recent claims made by scholars.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.2
• /
• pp.97-109
• /
• 2022

Purpose: This study aims to investigate the risk indicators contributing to implant failure, and analyze the relationship between risk indicators and marginal bone loss (MBL) through long-term follow-up over 3 years. Materials and Methods: From 2003 to 2017, patients' medical charts with a history of dental implant surgery at Chonnam National University Dental Hospital were reviewed retrospectively. The patient's demographic variables, and clinical variables were recorded. Periapical radiographs were used to evaluated the changes in MBL around implants. And we analyzed implant survival rates. Multiple regression analysis with backward elimination was conducted to correlate the patient's clinical variables and implant failure and Pearson correlation analysis was performed to the correlated between implant long-term survival rates and MBL and initial stability. Results: In multiple regression analysis, there was a statistically significant negative correlation between abutment connection type (β = -.189, P < .05), with or without SPT (β = -.163, P < .05), diabetes (β = -.164, P < .05), osteoporosis (β = -.211, P < .05) and MBL. Anticoagulant medication influenced the long-term success rate of implants. PTV values at the second implant surgery showed a statistically significant negative correlation with long-term implant survival (P < .05). Conclusion: For the long-term success of the implant, the appropriate abutment connection type must be selected and the periodic SPT is recommended. Systemic diseases such as diabetes and osteoporosis and anticoagulant medication should be considered. Furthermore, since high PTV at the second implant surgery correlated with the long-term survival rates of the implant, initial stability should be carefully considered before undergoing the prosthetic procedure.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.28 no.2
• /
• pp.63-93
• /
• 2023

This study aims to examine the history of naming the strait between the Yellow and East China Seas and the East Sea to suggest a consistent nomenclature and to demarcate the geographic region of the strait. Although the strait is internationally known as 'Korea Strait', it is commonly referred to as the 'South Sea' in Korean common usage. This review ultimately recommends the use of 'Korea Strait' as an appropriate geographical name for this area. To support this recommendation, the historical boundaries typically assigned to the Korea Strait were investigated. We also analyzed the evolution of geographical labels assigned to Korea Strait and to the Western and Eastern Channels (labels given to the two maritime areas surrounding Tsushima). Resources for this analysis included historic maps and charts, International Hydrographic Organization Special Publications (S-23), and maps published in the Ocean Science Journal (OSJ) and Journal of Oceanography (JO), which are two international journals representing Korean and Japanese sources, respectively, from 2005 to 2021. In these two international journals, the most frequently used names assigned to the strait of interest were Korea Strait (appearing 42.9% of OSJ maps, and 7.5% of JO maps), and Tsushima Strait (appearing 60.4% of JO maps, and 0% of OSJ maps). Other names were South Sea and Korea Strait/Tsushima Strait. On maps in the two reviewed journals, the boundaries of Korea Strait were defined explicitly or implicitly in five different ways: a broad region between the Yellow and East China Seas and Ulleung Basin (Type 1), the region between Ulleung Basin and Tsushima (Type 2), the western channel of the strait (Type 3-1), the eastern channel of the strait (Type 3-2), and both the western and eastern channels of the strait (Type 4). Overall, Type 1 was the most frequently used boundary, taking up 71.4% of OSJ and 60.4% of JO maps. Lastly, we suggest in this paper that the current flowing through Korea Strait from the East China Sea to the East Sea should be labeled the 'Korea Strait Warm Current' to indicate its full path through the strait. Currently, this current is internationally referred to as the 'Tsushima Warm Current', which does not link well to the commonly used geographic name of the strait.

• Information Systems Review
• /
• v.21 no.4
• /
• pp.143-156
• /
• 2019

Types of innovation can be categorized into simplification, information, automation, and intelligence. Intelligence is the highest level of innovation, and RPA can be seen as one of intelligence. Robotic Process Automation(RPA), a software robot with artificial intelligence, is an example of intelligence that is suited for simple, repetitive, large-scale transaction processing tasks. The RPA, which is already in operation in many companies in Korea, shows what needs to be done to naturally focus on the core tasks in a situation where the need for a strong organizational culture is increasing and the emphasis is on voluntary leadership, strong teamwork and execution, and a professional working culture. The introduction was considered naturally according to the need to find. Robotic Process Automation, or RPA, is a technology that replaces human tasks with the goal of quickly and efficiently handling structural tasks. RPA is implemented through software robots that mimic humans using software such as ERP systems or productivity tools. RPA robots are software installed on a computer and are called robots by the principle of operation. RPA is integrated throughout the IT system through the front end, unlike traditional software that communicates with other IT systems through the back end. In practice, this means that software robots use IT systems in the same way as humans, repeat the correct steps, and respond to events on the computer screen instead of communicating with the system's application programming interface(API). Designing software that mimics humans to communicate with other software can be less intuitive, but there are many advantages to this approach. First, you can integrate RPA with virtually any software you use, regardless of your openness to third-party applications. Many enterprise IT systems are proprietary because they do not have many common APIs, and their ability to communicate with other systems is severely limited, but RPA solves this problem. Second, RPA can be implemented in a very short time. Traditional software development methods, such as enterprise software integration, are relatively time consuming, but RPAs can be implemented in a relatively short period of two to four weeks. Third, automated processes through software robots can be easily modified by system users. While traditional approaches require advanced coding techniques to drastically modify how they work, RPA can be instructed by modifying relatively simple logical statements, or by modifying screen captures or graphical process charts of human-run processes. This makes RPA very versatile and flexible. This RPA is a good example of the application of digital to intelligence(D2I).