• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.5-10
• /
• 2005

정지궤도 인공위성의 추진시스템은 각 탱크 및 배관, 주요 핵심부분 등에 온도를 측정할 수 있는 온도센서를 장착하고 있다. 또한 추진시스템 내에 다수의 탱크가 장착될 경우 온도변화에 따라 탱크 내 추진제가 이동하는 열펌핑 현상이 발생하고 이때 온도변화는 일정한 경향을 갖는다. 본 논문에서는 무궁화위성 1호 추진시스템의 온도변화를 분석하고 이를 통하여 배관내에 가압제의 유입시기를 추정하고 위성폐기 시점을 추정하고자 한다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제54권4호
• /
• pp.299-315
• /
• 2015

The aim of this qualitative case study is twofold: 1) to analyze how an eleventh-grader, Min-Seon, conceive and represent a pattern of change between two varying quantities in a quadratic functional situation, and 2) further to help her form a concept of 'derivative' as a tool to express the relationship with employing a concept of 'rate of change.' The result indicates that Min-Seon was able to construct graphs of piecewise functions that take average rates of change as range of the functions, and managed to conjecture the derivative of a quadratic function, $y=x^2$. In conclusion, we argue that covariational approach could not only facilitate students' construction of an initial function concept, but also support their understanding of the concept of 'derivative.'

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권6호
• /
• pp.37-43
• /
• 1997

광방사에너지에 의해 염료나 안료의 밀도가 감소하며, 밀도 변화는 색변화를 초래한다. 이 연구에서는 방사에너지에 의한 염료밀도의 변화와, 밀도변화에 따른 색변화에 대한 가정을 이용하여 방사에너지에 의한 색변화를 예측할 수 있는 관계식을 만들었다. 또한 실험을 통하여 식중의 손상계수를 산출하였다. 이 식과 계수와 적절성을 검증하기 위하여 시료들을 일반 광원을 변색시키면서 그 변색의 크기를 측정하고 계산치와 비교한 결과, 대부분의 시료에서 일치하는 것을 확인할 수 있었다. 또한 가시 방사대에서 분광 손상계수는 분광 흡수율과 밀접한 관계가 있음을 알 수 있었다.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.468-479
• /
• 2019

This study used a three-dimensional-analysis method to quantitatively analyze the change of clothing appearance according to a gusset added to bodice and sleeve patterns for men in their twenties. Comparing six different patterns, the study found that patterns P1 and P2 with little gusset did not have a large difference in the strain map, and pattern P6 had no gusset in the motion of raising the arm $28^{\circ}$ to the side (M1). When the arm was raised $45^{\circ}$ to the side (M2), the P1 pattern had the smallest deformation, and only the P5 pattern had a large deformation from the neck to the armhole area. In contrast, except for in the P3 pattern, large wrinkles formed in the front and back when the arm was raised above $158^{\circ}$ (M3) from the side of the waist to the armpit. In addition, P3 had the smallest change in the hem of the bodice and sleeves. However, the appearance of P2, P3, and P5 was excellent when the arm was moved forward (M4), and the P2 and P5 patterns were the smallest at the bodice and sleeve hem. The P6 pattern showed the least fitness in terms of function. In the case of raising the arm, there was a strong correlation between gusset size and motion function, but when the motion of the arm changed, the motion function did not improved just by changing the ease size.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.221-224
• /
• 2002

Recently, simulation of Chemical Mechanical Polis hing is becoming more important because Process parameters on the material removal rate are complicated. And pattern-depent effects are a key concern in CMP processes. In this paper, we have been studied the changes of pattern density vs. oxide thickness with Stine's simulation model. We also have estimated the effective density using optimal window size with density mask, and have made a study of the change of oxide thickness as a function of polishing time.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권2호
• /
• pp.131-139
• /
• 2016

Recognition of human motions has become a main area of computer vision due to its potential human-computer interface (HCI) and surveillance. Among those existing recognition techniques for human motions, head detection and tracking is basis for all human motion recognitions. Various approaches have been tried to detect and trace the position of human head in two-dimensional (2D) images precisely. However, it is still a challenging problem because the human appearance is too changeable by pose, and images are affected by illumination change. To enhance the performance of head detection and tracking, the real-time three-dimensional (3D) data acquisition sensors such as time-of-flight and Kinect depth sensor are recently used. In this paper, we propose an effective feature extraction method, called adaptive local binary pattern (ALBP), for depth image based applications. Contrasting to well-known conventional local binary pattern (LBP), the proposed ALBP cannot only extract shape information without texture in depth images, but also is invariant distance change in range images. We apply the proposed ALBP for head detection and tracking in depth images to show its effectiveness and its usefulness.

• 대한본초학회지
• /
• 제20권4호
• /
• pp.133-140
• /
• 2005

Objectives : We have been used many herbal medicines after processing to improve the effect, decrease toxicity and side-effect, and change property. We have studied the physico-chemical change and HPLC pattern of Morindae Radix by means of processing method. Methods : This study was investigated the contents of loss on drying, residue on ignition, residue on acid insoluble ignition, 50% ethanol extract and HPLC pattern of Morindae Radix(Morinda officinalis How.) by processed and non-processed. We have conducted Morindae Radix and Damnacanthi Radix which is circulated in herbal medicine market by forgery. Processed Morindae Radix was prepared by heating of added to salt(SP), liquor(LP) and Glycyrrhizae Radix solution(GP) for 20-40 minutes. Results and Conclusions : From this analysis, we found that the content of 50% ethanol extract was increased by processing method. And we were detected distinguishable marker of processed and non-processed from Morindae Radix(Morinda officinalis How.) by HPLC pattern analysis.

• 환경영향평가
• /
• 제18권3호
• /
• pp.161-170
• /
• 2009

As urban growth continues, the earth ecosystem is increasingly dependent on the patterns of urban growth. The impact intensity from urban growth is expected to change predictably with distance from the urban center. However we can't fully understand yet how urban development pattern affects urban ecosystem. In researches about urban ecosystem, it is important to relate the spatial pattern of urbanization to ecological processes. So we used gradient analysis with time data; 1980's, 1990's and 2000's. We attempted to quantify the urban spatiotemporal impacts in Daejeon-city and Cheonan-city, Korea, along a 75km long and 3km wide transect. Through the results, we found the impacts range of urbanization with urban development process of two cities. When the urban growth was concentrated on in both cities, the impacts intensity and range were much stronger and wider. As a result, in urban planning or green space planning, we have to consider suitable urban development forms with surrounding areas, and make legal clauses which limits landuse change. This quantifying the urban gradient is an important step in understanding urban ecology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.284-287
• /
• 2001

In this paper, we designed and implemented a precise pulse motor control chip that generates the parabolic speed pattern. This chip can control step motor[1], DC servo[2] and AC servo motors at high speed and precisely. It can reduce the mechanical vibration to the minimum at the change point of a degree of acceleration. Because the parabolic speed pattern has the continuous acceleration change. In this paper, we present the pulse generation algorithm and the parabolic pattern speed generation. We verify these algorithm using visual C++. We designed this chip with VHDL(Very High Speed Integrated Circuit Hardware Description Language) and executed a logic simulation and synthesis using Synopsys synthesis tool. We executed the pre-layout simulation and post-layout simulation with Verilog-XL simulation tool. This chip was produced with 100 pins, PQFP package by 0.35 um CMOS process and implemented by completely digital logic. We developed the hardware test board and test program using visual C++. We verify the performance of this chip by driving the servo motor and the function by GUI(Graphic User Interface) environment.

• 말소리와 음성과학
• /
• 제9권4호
• /
• pp.99-106
• /
• 2017

Clinical data about vocal nodules have seldom been reported, even though vocal nodules are commonly diagnosed in outpatient speech and voice clinic. This study aims to investigate clinical characteristics of the patients who are diagnosed with vocal nodules. This study analyzed the data for 10 years from the 319 patients diagnosed with vocal nodules (45 males and 274 females with the mean age of 39.4 ranging from 2 to 83) in terms of gender, age, occupation, voice change initiation pattern, change with time, throat clearing, smoking history, type of voice abuse, acoustic analysis, maximum phonation time, GRBAS, and VHI. Thirteen patients (4.08%) had unilateral vocal nodule and 306 patients (95.9%) had bilateral vocal nodule, the majority of which had a pattern of asymmetry (73.9%). The glottal closure pattern was hourglass in 72.1% of patients, posterior chink in 17.9% of patients, and irregular in 7.9% of patients. The most common occupational category was professional voice users (43.4%). The voice abuse pattern included excessive talking in 96 patients (76.8%), loud voice in 78 (62.4%) patients, and excessive singing in 17 patients (21.6%). The patients showed worse scores in G, B, and S than in R and A for the GRBAS evaluation. The most recommended treatment for vocal nodules was voice therapy. The current clinical data will be helpful for treatment planning for the patients of vocal nodule.