• Archives of Reconstructive Microsurgery
• /
• v.1 no.1
• /
• pp.31-38
• /
• 1992

The management of giant cell tumor involving juxta-articular portion has always been a difficult problem. In certain some giant cell tumors with bony destruction, a wide segmental resection may be needed for preventing to recur. But a main problem is preserving of bony continuity in bony defect as well as preservation of joint function. The traditional bone grafts have high incidence in recurrence rate, delayed union, bony resorption, stress fracture despite long immobilization and stiffness of adjuscent joint. We have attemped to overcome these problems by using a microvascular technique to transfer the fibula with peroneal vascular pedicle as a living bone graft. From Apr. 1984 to Nov. 1990, we performed the reconstruction of wide bone defect after segmental resection of giant cell tumor in 4 cases, using Vascularized Fibular Graft, which occur at the distal radius in 3 cases and at the proximal tibia in 1 case. An average follow-up was 2 years 8 months, average bone defect after wide segmental resection of lesion was 11.4cm. These all cases revealed good bony union in average 6.5months, and we got the wide range of motion of adjacent joint without recurrence and serious complications.

• Mycobiology
• /
• v.40 no.1
• /
• pp.35-41
• /
• 2012

A repeated batch fermentation system was used to produce ethanol using $Saccharomyces$ $cerevisiae$ strain (NCIM 3640) immobilized on sugarcane ($Saccharum$ $officinarum$ L.) pieces. For comparison free cells were also used to produce ethanol by repeated batch fermentation. Scanning electron microscopy evidently showed that cell immobilization resulted in firm adsorption of the yeast cells within subsurface cavities, capillary flow through the vessels of the vascular bundle structure, and attachment of the yeast to the surface of the sugarcane pieces. Repeated batch fermentations using sugarcane supported biocatalyst were successfully carried out for at least ten times without any significant loss in ethanol production from sugarcane juice and molasses. The number of cells attached to the support increased during the fermentation process, and fewer yeast cells leaked into fermentation broth. Ethanol concentrations (about 72.65-76.28 g/L in an average value) and ethanol productivities (about 2.27-2.36 g/L/hr in an average value) were high and stable, and residual sugar concentrations were low in all fermentations (0.9-3.25 g/L) with conversions ranging from 98.03-99.43%, showing efficiency 91.57-95.43 and operational stability of biocatalyst for ethanol fermentation. The results of the work pertaining to the use of sugarcane as immobilized yeast support could be promising for industrial fermentations.

• Applied Biological Chemistry
• /
• v.46 no.1
• /
• pp.1-6
• /
• 2003

Abstract: In order to improve the system for biological nitrogen oxidizing process in sewage and wastewater, a bacterium having high abilities to oxidize of nitrogen was isolated from wastewater and polluted soils. The strain was identified to Bacillus sp. CH-N, based on the physiological and biochemical properties. Characteristics and oxidizing ability of both ammonia and nitrite were examined for the strain, Bacillus sp. CH-N. The strain showed the oxidizing rate about 80% to 90% on the sewage and wastewater after 48 h culture. The nitrogen oxidizing rate was increased in proportion to the initial concentration of glucose. The microorganism, Bacillus sp. CH-N cell immobilized on ceramic carrier were evaluated for the oxidation of ammonia in culture media.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.2
• /
• pp.41-51
• /
• 2017

Microbial processes that bind heavy metals and form minerals are widespread, and they represent a basic aspect of biogeochemistry. Some microorganisms can crystallize minerals by secreting a specific enzyme. In particular, calcite ($CaCO_3$) precipitation is an important part of biomineralization, and has been studied extensively because of its wide application in civil engineering technology. This process provides an effective way to stabilize heavy metals within a relatively stable crystal phase. In this study, biomineralization of calcite by three urea-hydrolyzing indigenous bacterial strains was investigated by microbiological analyses. Three bacterial strains were isolated from the sludge of B mine in Mexico and each bacterial strain was identified by the cellular fatty acid composition and 16S rRNA partial sequencing analysis. The results of the identification analysis showed that these strains were closest to Sporosarcina pasteurii, Kurthia gibsonii, and Paenibacillus polymyxa. We found that the optimum conditions for growth of these indigenous bacteria were $30-40^{\circ}C$ and pH range of 7-8. Microbiological analyses showed the possibility that the bioaccumulated heavy metals ions were deposited around the cell as crystalline carbonate minerals under the optimum conditions. The findings of our study suggest that the indigenous bacterial strains play an important role in heavy metal immobilization.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.447-452
• /
• 2005

The hydrogen production using immobilized cellsl was conducted using fruit wastewaters at various culture conditions. Three kinds of fruit wastewaters, melon, watermelon and pear were used. Sodium alginate was used as immobilization material. Among them, concentration of reducing sugar which was one of the main components in fruit was the highest at watermelon wastewater, and also hydrogen production was the highest as 2319.2 mL/L in it. Although hydrogen production was not much changed according to sodium alginate concentration, its production was the most at 3%(w/v). As bead size as small, hydrogen production was higher. With inspection of interior, it confirmed that the cell grew well in bead. But the addition of amino acids using as agent for metabolite production had almost no affected on hydrogen productivity. The effective range of $FeSO_4$ addition on hydrogen production were up to 1.2 g/L, and above the concentration, it inhibited the productivity. Organic acids produced during watermelon fermentation were mainly lactic acid, butyric acid, abd acetic acid; and a little of propionic acid.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2098-2105
• /
• 2016

Massive reserves of methane ($CH_4$) remain unexplored as a feedstock for the production of liquid fuels and chemicals, mainly because of the lack of economically suitable and sustainable strategies for selective oxidation of $CH_4$ to methanol. The present study demonstrates the bioconversion of $CH_4$ to methanol mediated by Type I methanotrophs, such as Methylomicrobium album and Methylomicrobium alcaliphilum. Furthermore, immobilization of a Type II methanotroph, Methylosinus sporium, was carried out using different encapsulation methods, employing sodium-alginate (Na-alginate) and silica gel. The encapsulated cells demonstrated higher stability for methanol production. The optimal pH, temperature, and agitation rate were determined to be pH 7.0, $30^{\circ}C$, and 175 rpm, respectively, using inoculum (1.5 mg of dry cell mass/ml) and 20% of $CH_4$ as a feed. Under these conditions, maximum methanol production (3.43 and 3.73 mM) by the encapsulated cells was recorded. Even after six cycles of reuse, the Na-alginate and silica gel encapsulated cells retained 61.8% and 51.6% of their initial efficiency for methanol production, respectively, in comparison with the efficiency of 11.5% observed in the case of free cells. These results suggest that encapsulation of methanotrophs is a promising approach to improve the stability of methanol production.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.141-148
• /
• 2015

The presence of phenols in treated palm oil mill effluent (POME) is an environmental concern due to their phytotoxicity and antimicrobial activity. In this study, phenol-degrading bacteria, Methylobacterium sp. NP3 and Acinetobacter sp. PK1 were immobilized on oil palm empty fruit bunches (EFBs) for removal of phenols in the treated POME. The bacterial exopolysaccharides (EPS) were responsible for cell adhesion to the EFBs during the immobilization process. These immobilized bacteria could effectively remove up to 5,000 mg/L phenol in a carbon free mineral medium (CFMM) with a greater degradation efficiency and rate than that with suspended bacteria. To increase the efficiency of the immobilized bacteria, three approaches, namely activation, acclimation, and combined activation and acclimation were applied. The most convenient and efficient strategy was found when the immobilized bacteria were activated in a CFMM containing phenol for 24 h before biotreatment of the treated POME. These activated immobilized bacteria were able to remove about 63.4% of 33 mg/L phenols in the treated POME, while non-activated and/or acclimated immobilized bacteria could degrade only 35.0%. The activated immobilized bacteria could be effectively reused for at least ten application cycles and stored for 4 weeks at $4^{\circ}C$ with the similar activities. In addition, the utilization of the abundant EFBs gives value-added to the palm oil mill wastes and is environmentally friendly thus making it is attractive for practical application.

• The Korean Journal of Physiology and Pharmacology
• /
• v.12 no.3
• /
• pp.117-123
• /
• 2008

Although growth associated protein-43 (GAP-43) is known to playa significant role in the regulation of axonal growth and the formation of new neuronal connections in the hippocampus, there is only a few studies on the effects of acute stress on GAP-43 mRNA expression in the hippocampus. Moreover, the effects of repeated citalopram treatment on chronic mild stress (CMS)-induced changes in GAP-43 mRNA expression in the hippocampus have not been explored before. To explore this question, male rats were exposed to acute immobilization stress or CMS. Also, citalopram was given prior to stress everyday during CMS procedures. Acute immobilization stress significantly increased GAP-43 mRNA expression in all subfields of the hippocampus, while CMS significantly decreased GAP-43 mRNA expression in the dentate granule cell layer (GCL). Repeated citalopram treatment decreased GAP-43 mRNA expression in the GCL compared with unstressed controls, but this decrease was not further potentiated by CMS exposure. Similar decreases in GAP-43 mRNA expression were observed in CA1, CA3 and CA4 areas of the hippocampus only after repeated citalopram treatment in CMS-exposed rats. This result indicates that GAP-43 mRNA expression in the hippocampus may differently respond to acute and chronic stress, and that repeated citalopram treatment does not change CMS-induced decreases in GAP-43 mRNA expression in the GCL.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.147-152
• /
• 2009

In this study, the applicability of alginate-immobilized Pseudomonas putida mt-2 KG1206 on the environments, contaminated with toluene analogs was conducted. Genetically engineered strain KG1206 produces light by direct (m-toluate, benzoate) and indirect (toluene, xylenes) inducers. The protocol for the alginate-immobilization was determined in terms of the cell to alginate ratio, solution, proper number of alginate beads, and other conditions. Maximum bioluminescences of five chemicals by immobilized strain were generally observed in following orders: m-toluate > p-xylene > toluene > o-xylene > m-xylene. In relationship between bioluminescence activity and inducer reduction, initial m-toluate (5 mM) in solution was removed approximately 48% of initial at 5 h exposure, showing continuous decrease of inducer chemical in solution. These results of study with alginate-immobilized beads would be useful, especially, for biomonitoring of contaminated environments with specific compounds, such as petroleum hydrocarbon compounds including toluene analogs.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.256-262
• /
• 2007

The purpose of this study was to determine the effect of surface modification on the fibrovascular ingrowth into porous polyethylene (PE) spheres ($Medpor^{(R)}$), which are used as an anophthalmic socket implant material. To make the inert, hydrophobic PE surface hydrophilic, nonporous PE film and porous PE spheres were subjected to plasma treatment and in situ acrylic acid (AA) grafting followed by the immobilization of arginine-glycine-aspartic acid (RGD) peptide. The surface-modified PE was evaluated by performing surface analyses and tested for fibroblast adhesion and proliferation in vitro. In addition, the porous PE implants were inserted for up to 3 weeks in the abdominal area of rabbits and, after their retrieval, the level of fibrovascular ingrowth within the implants was assessed in vivo. As compared to the unmodified PE control, a significant increase in the hydrophilicity of both the AA-grafted (PE-g-PAA) and RGD-immobilized PE (PE-g-RGD) was observed by the measurement of the water contact angle. The cell adhesion at 72 h was most notable in the PE-g-RGD, followed by the PE-g-PAA and PE control. There was no significant difference between the two modified surfaces. When the cross-sectional area of tissue ingrowth in vivo was evaluated, the area of fibrovascularization was the largest with PE-g-RGD. The results of immunostaining of CD31, which is indicative of the degree of vascularization, showed that the RGD-immobilized surface could elicit more widespread fibrovascularization within the porous PE implants. This work demonstrates that the present surface modifications, viz. hydrophilic AA grafting and RGD peptide immobilization, can be very effective in inducing fibrovascular ingrowth into porous PE implants.