• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.961-963
• /
• 2002

Organic electroluminesencent device have been studied because of its easy fabrication and high brightness for plate panel display instead of cathode ray tube. There are some device structure for full color filter system can be applicable to the full color application if the blue light organic electroluminesencent device(OELD) is developed. In this study, we fabricated OELD of ITO/CuPc/PBD/LiF/Al using mixed of 500, 600, $700[{\AA}]$ by vacuum method as a emitting layer. We studied the voltage-current, voltage-luminance characteristics and blue light emission of OELD,

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.126-133
• /
• 2008

The main objective of the present study is to achieve linear temperature distribution of cooling surface of plunger. K type thermocouples are attached at the surface of plunger to measure temperature. Nozzle and insulating material are inserted in the pin hole of the plunger for this study. Cooling water flow enters at one nozzle and leaves at three nozzles. Flow through nozzle can be activated in the pin hole, temperature of hot point around hole is decreased. Meanwhile, insulating material blocks off heat transfer, temperature of cold point around hole is increased. By combination of nozzle and insulation, heat transfer of hole is controlled effectively, as result its, temperature of plunger surface shows linear temperature distribution.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.176-180
• /
• 1992

At the KACC'91 conference, we proposed a method of automatic detection of shape of the faulty holes of a shadow mask which is used in a cathode-ray tube of a color television. In this method, the image data are taken from two areas of the mask with CCD camera. Comparing the shape of holes in these two areas by use of a signal processing technique, we can find any fault in the shape of holes. This paper describes the effect of smoothing filters of effectively finding the faulty holes from the difference image data. A computer simulation and actual experiment with a shadow mask have shown that this method of fault detection is very effective for practical use.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.149-150
• /
• 2000

Lead-doped calcium sulfide(CaS:Pb) thin film electroluminescent devices were deposited using atomic layer deposition(ALD). CaS:Pb is a very promising blue phosphor showing very high luminance and the color coordinate close to the blue of cathode ray tube. The luminance, $L_{25}$, of CaS:Pb(1.6 mol.%) EL device was higher than 80 $cd/cm^2$ at a driving frequency of 60Hz. The color coordinates of blue EL emission of CaS:Pb deposited by ALD are consistent with the Pb concentration ranging from approximately 0.5 to 3 mol.%.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.307-310
• /
• 2002

Color reproductions in most ink jet printer are quite different from that of standard CRT (cathode ray tube) monitor display because of the nonlinear characteristic in subtractive color reproduction. Gray scale CCT(correlated color temperature) reproductions in a typical printer are vary with the input RGB level. A simple method for making constant gray scale CCT and gamma value in photo paper is proposed in this paper. The compensation of the CCT with white point of the photo paper under the CIE standard illuminant D65 and color correction has been confirmed using the LUT(look-up table) to compensate the CCT and gamma curve characteristic.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1521-1522
• /
• 2006

Cathode ray tube(CRT)를 대체 할 수 있는 차세대 display 중 plasma display panels(PDPs)가 각광받고 있지만, 여전히 효율 개선은 중요한 과제이다. 본 연구에서는 기존의 PDP driving 중 발광영역에 sine wave를 접목시켜 수치해석하였다. 수치 해석은 2차원 fluid-code simulator를 사용하였고, 여러가지 sine wave형태와 세폭 pulse를 조합하여, 30%이상의 효율 향상을 얻을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.241-243
• /
• 2000

In this paper, we analyze three-dimensional magnetic field distribution of a convergence purity maget(C.P.M) which is used for a cathode ray tube. The magnetization vector distribution of the C.P.M is obtained from the result of magnetization process analysis using the 2D F.E.M. Then the motion of electron beam passing through the inner space of the C.P.M is determined and compared with experimental result.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.284-285
• /
• 2003

Significant research interest in the growth and characterization of $Y_2$O$_3$：Eu$^{3+}$ thin films has been shown over the last few years because of the promise for applications of display devices. Although an Eu-doped oxysulfide (Eu： $Y_2$O$_2$S) which has an efficiency of 13％ has been used for a traditional cathode ray tube (CRT) red phosphor, the sulfide system is known to degrade rapidly under the high current densities needed for field-emission display (FED) technology. (omitted)d)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.797-800
• /
• 2004

FED(Field Emission Display)는 CRT(Cathode Ray Tube)의 화질과 LCD(Liquid Crystal Display)와 같은 FPD(Flat Panel Display)의 경량, 박형의 장점을 만족시키는 차세대 Display 소자로서 주목을 받고 있다. 본 논문은 저항열을 이용하여 256 Gray-Scale Level을 출력하는 8 비트 FED Data Driver IC 설계에 관한 것이다. 즉, 저항열과 D/A 변환기를 통하여 디지털 입력 데이터에 따른 아날로그 출력 데이터를 갖는 FED 용 Data Driver IC이다. 본 논문에서 설계된 Driver IC는 집적도를 높여 Output Channel 수를 증가시키는 것을 목표로, 하이닉스 0.6um High Voltage 공정을 사용하였으며, 8 비트 RGB 데이터 입력과 40V 구동전압에서 동작하도록 설계하였다.

• Electronics and Telecommunications Trends
• /
• v.34 no.2
• /
• pp.10-18
• /
• 2019

Since the introduction of CRT(Cathode Ray Tube) in the 1950s, display technologies have been developed continuously. Flat panel displays such as PDP(Plasma Display Panel) and LCD(Liquid Crystal Display) were commercialized in the late 1990s, and OLED(Organic Light Emitting Diodes) and Micro-LED(Micro-Light Emitting Diodes) are now being developed and are becoming widespread. In the future, we expect to develop ultra-realistic, flexible, embedded sensor displays. Ultra-realistic display can be applied to AR/VR(Augmented Reality/Virtual Reality) devices and spatial light modulators for holography. The sensor-embedded display can be applied to robots; electronic skin; and security devices, including iris recognition sensors, fingerprint recognition sensors, and tactile sensors. AR/VR technology must be developed to meet technical requirements such as viewing angle, resolution, and refresh rate. Holography requires optical modulation technology that can significantly improve resolution, viewing angle, and modulation method to enable wide-view and high-quality hologram stereoscopic images. For electronic skin, stable mass production technology, large-area arrays, and system integration technologies should be developed.