A Study for Improvement of Temperature Distribution in Plunger Surface Cooling

브라운관용 플런저 냉각표면의 온도분포 개선을 위한 연구

  • 곽경민 (영남대학교 기계공학부) ;
  • 박지열 (영남대학교 기계공학부) ;
  • 배철호 (영남대학교 기계공학부)
  • Published : 2008.03.01

Abstract

The main objective of the present study is to achieve linear temperature distribution of cooling surface of plunger. K type thermocouples are attached at the surface of plunger to measure temperature. Nozzle and insulating material are inserted in the pin hole of the plunger for this study. Cooling water flow enters at one nozzle and leaves at three nozzles. Flow through nozzle can be activated in the pin hole, temperature of hot point around hole is decreased. Meanwhile, insulating material blocks off heat transfer, temperature of cold point around hole is increased. By combination of nozzle and insulation, heat transfer of hole is controlled effectively, as result its, temperature of plunger surface shows linear temperature distribution.

Keywords

References

  1. Ji, S. M., Choi, J. H., Kim, J. B. and Ha, D. S., "Numerical Simulation for Pressing Process of Hot Glass," Journal of Korean Society for Precision Engineering, Vol. 22, No. 5, pp. 205-213, 2005
  2. Hayashi, M., Hasegawa, T. and Ohiwa, N., "Numerical Simulation of Glass-Pressing Process," Trans. of Japan Society of Mech. Eng., Vol. 61, No. 591, pp. 359-364, 1995
  3. Wang, H. P. and McLay, R. T., "Automatic Remeshing Scheme for Modeling Hot Forming Process," Journal of Fluids Engineering, Vol. 108, No. 4, pp. 465-469, 1986 https://doi.org/10.1115/1.3242604
  4. Samsung Corning Co., LTD, "Cooling Arrangement of Plunger in Mold for Molding Cathode Ray Tube Glass," Korean Patent, No. 10-2001-0053323, 2001
  5. Asahi Glass Co., LTD, "Plunger for Press Molding Hollow Glass Article," Japan Patent, No. 09-227141, 1997
  6. Asahi Glass Co., LTD, "Plunger for Molding Brown Tube Glass and Production of the Same," Japan Patent, No. 09-227142, 1997
  7. Nippon Electric Glass Co., LTD, "Plunger for Forming Hollow Glass Product," Japan Patent, No. 07-069656, 1995
  8. Shinhoukoku Seitetsu KK and Asahi Glass Co., LTD, "Plunger to Mold Cathode-Ray Tube Glass," Japan Patent, No. 07-220637, 1995