• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.119-132
• /
• 2015

Electrical resistivity is an important physical property of portland cement concrete which is directly related to chloride induced corrosion process. This study examined the electrical surface resistivity (SR) and bulk electrical resistivity (BR) of concrete cylinders for various binary and ternary based high-performance concrete (HPC) mixtures from 7 to 161 days. Two different types of instruments were utilized for this investigation and they were 4 point Wenner probe meter for SR and Merlin conductivity tester for bulk resistivity measurements. Chronological development of electrical resistivity as well as correlation between two types of resistivity on several days was established for all concrete mixtures. The ratio of experimental surface resistance to bulk resistance and corresponding resistivity was computed and compared with theoretical values. Results depicted that bulk and SR are well correlated for different groups of HPC mixtures and these mixtures have attained higher range of electrical resistivity for both types of measurements. In addition, this study presents distribution of surface and bulk resistivity in different permeability classes as proposed by Florida Department of Transportation (FDOT) specification from 7 to 161 days. Furthermore, electrical resistivity data for several HPC mixtures and testing procedure provide multiple promising options for long lasting bridge decks against chloride induced corrosion due to its ease of implementation, repeatability, non-destructive nature, and low cost.

• 한국재료학회지
• /
• 제31권2호
• /
• pp.108-114
• /
• 2021

In the manufacturing of bulk graphite, pores produced by vaporization and discharge of volatile materials in binders during carbonization reduce the density of bulk graphite, which adversely affects the electrical conductivity, strength and mechanical properties. Therefore, an impregnation process is introduced to fill the pores and increase the density of bulk graphite. In this study, bulk graphite is prepared by varying the viscosity of the impregnant. The microstructure of bulk graphite is observed. The flexural strength and electrical resistivity are measured. As the viscosity of the impregnants decreases and the number of impregnations increases, it is shown that the number of pores decreases. The density before impregnation is 1.62 g/㎤. The density increases to 1.67 g/㎤ and porosity decreases by 18.6 % after three impregnations using 5.1 cP impregnant, resulting in the best pore-filling effect. After three times of impregnation with a viscosity of 5.1 cP, the flexural strength increases by 55.2 % and the electrical resistivity decreases by 86.76 %. This shows that a slight increase in density due to the pore-filling effect improves the properties of bulk graphite.

• 지구물리와물리탐사
• /
• 제12권4호
• /
• pp.328-337
• /
• 2009

암석 시료의 전기비저항과 공극수의 전기비저항의 관계를 고찰하기 위한 실험에 있어서 일반적으로 코어의 유효공극 내의 공극수를 포화시키고자 하는 전해질 용액이 완전히 치환하였다고 가정한다. 이 연구에서는 용액의 전기전도 도가 8, 160, 3200, 64000 ${\mu}S$/cm인 4종류의 소금물을 동일한 시멘트 시험편에 각각 4회씩 포화과정을 반복하며 함수율의 변화에 따른 전기비저항을 측정하고, 그 변화로부터 포화과정의 반복에 의해 공극수가 치환되는 정도에 대한 고찰하였다. 용액의 전기전도도를 높여가며 각각 4회씩 반복하고 다시 낮춰가면서 4회씩 포화과정을 반복하였다. 반복 횟수가 많아질수록 용액이 공극수를 더 많이 치환할 것이다. 따라서 용액의 전기전도도를 높여가며 측정한 전기비저항과 낮춰가며 측정한 전기비저항의 기하평균을 용액이 공극수를 완전히 치환하였을 때의 전기비저항으로 간주하고 비교의 기준으로 삼았다. 포화과정을 4회 반복함으로써 공극수가 치환하고자 하는 용액으로 치환되어 이전 공극수의 전기전도도와는 상관없이 암석의 전기비저항을 10% 이내의 편차로 측정할 수 있었다. 반면, 전기전도도가 낮은 용액으로부터 높은 용액으로 순차적으로 포화과정을 1회만 수행했을 경우에는 측정되는 암석의 전기비저항에 있어서 최대 40%의 오차를 보였다. 측정된 시료의 전기비저항과 공극수의 전기비저항의 관계는 변형된 병렬저항모델로 대체적으로 설명되어지나, 이를 일반화하기 위해서는 다양한 공극율을 가지는 암석 시료에 대해 다양한 공극수의 전기비저항에 대한 자료의 축적이 필요하다.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.63-67
• /
• 2012

The films were deposited at evaporator system and were annealed at heat treatment. The films had a dense microstructure with fine grains. The electrical properties of the films were dramatically controlled with annealing. Samples Preparation were analyzed in term of positive temperature coefficient of Resistivity Samples were made in the substrate tempera-true of $400^{\circ}C$ deposition time of 10 hours, and forward power of 210watt. R-T(resistivity-temperature) Characteristics of the samples were investigated as a function of the substrate type and the ambient temperature. The resistivity of the thin film specimens was compared with that of the bulk type specimens. By using RF/DC magnetron sputtering system, we obtained lower resistivity in the thermistor with thin $BaTiO_3$ film than that in the bulk type thermistor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.17-20
• /
• 1994

PTCRl(positive temperature coefficient of resistivity) thermistors in the thin file BaTiO$_3$ system were deposited by radio frequency (13.56 MHz) and dc radio frequency (13.56MHz) and dc magnerton sputter equipment. R-T(resistivity -temperature) properties was investigated as a function of substrate and the temperature variation. The specimens make a comperison between the thin films and the bulk in the resistivity variation. Substrate temperature. deposition time. and forward power are deposited at the 400$^{\circ}C$, 10 hours, and 210 watt. respectively. The aim of this work is to obtain lower than bulk specimen resistivity in thin films BaTiO$_3$ system thermistor by RF/DC magnetron sputter equipment.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.49-55
• /
• 2006

Compressional wave velocity (Vp), shear wave velocity (Vs), elastic and physical properties, and electrical resistivity for two core sediments obtained from Southeastern Yellow Sea Mud (SEYSM) were measured and computed. The sediments consist of homogeneous mud (mostly silt and clay) with shells and shell fragments. As a result, the mean grain size is uniform ($7.5-8.5{\Phi}$ throughout the core sediments. However, physical properties such as wet bulk density and porosity show slightly increasing and decreasing patterns with depth, compared to the mean grain size. The compressional (about 1475 m/s in average) and shear wave (about 60 m/s in average) velocities with depth accurately reflect the pattern of wet bulk density and porosity. Electrical resistivity is more closely correlated with compressional wave velocity than physical properties. The computed Vp/Vs and Poisson's ratios are relatively higher (more than 10) and lower (approximately 0.002) than Hamilton's (1979) data, respectively, suggesting the typical characteristics of soft and fully water-saturated marine sediments. Thus, the Vp/Vs ratio in soft and unconsolidated sediments is not likely sufficient to examine lithology and sediment properties. Relationships between the elastic constant and physical properties are correlated well. The elastic constants (Poisson's ratio, bulk modulus, shear modulus) given in this paper can be used to characterize soft marine sediments saturated with seawater.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.911-917
• /
• 1996

Platinum thin films were deposited on Si-wafer by DC rnagnetron sputtering for RTD (resistance thermometer devices). We investigated the physical and electrical characteristics of these films under various conditions, the input power, working vacuum, temperature of substrate and also after annealing these films. The deposition rate was increased with increasing the input power but decreased with increasing Ar gas pressure. The resistivity and sheet resistivity were decreased with increasing the temperature of substrate and the annealing time at 1000.deg. C. At substrate temperature of >$300^{\circ}C$, input power of 7 w/cm$^{2}$, working vacuum of 5 mtorr and annealing conditions of 1000.deg. C and 240 min, we obtained 10.65.mu..ohm..cm, resistivity of Pt thin films and 3800-3900 ppm/.deg. C, TCR(temperature coefficient of resistance). These values are close to the bulk value. These results indicate that the Pt thin films deposited by DC magnetron sputtering have potentiality for the development of Pt RTD temperature sensor.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권1호
• /
• pp.12-17
• /
• 2004

The body-tied FinFETs (bulk FinFETs) implemented on bulk Si substrate were characterized through 3-dimensional device simulation. By controlling the doping profile along the vertical fin body, the bulk FinFETs can be scaled down to sub-30 nm. Device characteristics with the body shape were also shown. At a contact resistivity of $1{\times}10^{-7}\;{\Omega}\;cm^2$, the device with side metal contact of fin source/drain showed higher drain current by about two. The C-V results were also shown for the first time.

• 한국수소및신에너지학회논문집
• /
• 제6권1호
• /
• pp.17-22
• /
• 1995

Thermally evaporated Pd films on substrate were hydrogenated upto 1 bar of hydrogen gas at room temperature. Temperature dependence hange of electrical resistivity on Pd films is examined in the thickness range between $60{\AA}$ and $990{\AA}$. Resistivity of Pd is fitted well with Bloch-$Gr{\ddot{u}}neisen$ formula. Debye temperatures of Pd films are about 254 K, which are 20 K lower than that of bulk Pd. Debye temperature is not sensitive to film thickness change. Temperature of substrate during evaporation changes temperature dependence of resistivity of films much. Optical phonon contribution increases with decreasing temperature of PdHx.

• 한국재료학회지
• /
• 제3권4호
• /
• pp.422-423
• /
• 1993

이 short note에서 우리는 bulk gadolinium의 강자성에서 상자성으로의 전이온도(즉, Curie점) 측정에 대한 결과를 보고하고자 한다. 이 결과보고는 gadolinium박막에 대한 이전의 결과에 정당성을 주기 위해서 쓰여졌다. 본 실험에서 bulk gadolinium의 Curie점은 시료의 저항을 온도의 함수로 측정함으로써 결정하였다. 이는 Curie점에서 비열의 특이성이 바로 비저항의 특이성으로 연결되기 때문이다. 결과적으로 우리는 bulk gadolinium의 Curie점이 19.2${\pm}$0.$3^{\circ}C$가 되고이 값은 비열의 실험치로 결정한 다른 그룹들의 실험값들과 잘 일치하고 있음을 알 수 있었다.