• The Korean Journal of Ceramics
• /
• v.3 no.3
• /
• pp.163-168
• /
• 1997

Most of heteroepitaxial $\beta$-SiC thin films have been successfully grown on Si(100) adapting a carburizing process, by which a few atomic layers of substrate surface is chemically converted to very thin SiC layer using hydrocarbon gas sources. Using an organo-silicon precursor, bis-trimethylsilymethane (BTMSM, [$C_7H_{20}Si_2$]), heteropitaxial $\beta$-SiC thin films were successfully grown directy on Si substrate without a carburized buffer layer. The defect density of the $\beta$-SiC thin films deposited without a carburized layer was as low as that of $\beta$-SiC films deposited on carburized buffer layer. In addition, void density was also reduced by the formation of self-buffer layer using BTMSM instead of carburized buffer layer. It seems to be mainly due to the characteristic bonding structure of BTMSM, in which Si-C was bonded alternately and tetrahedrally (SiC$_4$).

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.125-129
• /
• 2001

NiO buffer layers were deposited on texture Ni tapes fur YBCO coated conductors by MOCVD(metal organic chemical vapor deposition) method, using a single solution source. Variables were deposition temperature and flow rate of $0_2$carrier gas. At higher temperatures, The NiO(111) texture was well developed, but the NiO(200) texture was developed at low temperatures. The best result was obtained at the deposition temperature of$ 470^{\circ}C$ and the gas flow rate of 200 sccm. FWHM value of $\omega$-scan fur NiO(200) of the film and $\Phi$-scan for NiO(111) of the film was $4.2^{\circ}$ and $7^{\circ}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1023-1028
• /
• 2014

Protonated caffeine ($CH^+$) and glucosamine ($GH^+$) overlapped in an analysis with ion mobility spectrometryquadrupole mass spectrometry. Ethyl lactate vapor (L) at different concentrations from 0 to 22 mmol $m^{-3}$ was added as a buffer gas modifier to separate these signals. The drift times of $CH^+$ and $GH^+$ increased with L concentration. The drift time increase was associated to clustering equilibria of $CH^+$ and $GH^+$ with one molecule of L and the equilibrium of $GH^+$ was more displaced to the formation of $GLH^+$ than that of $GLH^+$. $GH^+$ clustered more to L than $CH^+$ because $GLH^+$ formed more stable hydrogen bonds (26.30 kcal/mol) than $GLH^+$ (24.66 kcal/mol) and the positive charge in $GH^+$ was more sterically accessible than in $CH^+$. The aim of this work was to use theoretical calculations to guide the selection of a buffer gas modifier for IMS separations of two compounds that overlap in the mobility spectra and predict this separation, simplifying that empirical process.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.369-378
• /
• 2009

Protein fractionation was evaluated from whole crop silages of rye (RS), wheat (WS), triticale (TS), oat (OS), barley (BS), and rice straw silage (RSS), and in vitro trial was carried out to examine the effect of silage and extraction of soluble protein on fermentation characteristics, total gas production and degradation. Soluble protein of silages was extracted with borate-phosphate buffer, and fermentation characteristics, gas production and degradation of silages were estimated by incubating anaerobically the mixed solution of strained rumen fluid and artificial saliva (1:1, v/v) containing dried and ground silages placed in nylon bag at $39^{\circ}C$ up to 48h. Soluble protein (SP) content was lowest for RSS as 2.11% in total CP compared to those for other silages. Highest A fraction (NPN) was observed from RS (74.33% of total CP) while those from TS and RSS were relatively low (48%). B2 fraction was relatively higher for RS, RSS and WS than for TS and BS. $B_3$ fraction was lowest in WS among silages. C fraction (27.07) in RSS was higher than in other silages (1.40~9.93%). pH in incubation solution was increased (P<0.01~P<0.001) for extracted silages up to 12h but decreased (P<0.01) at 48h for non-extracted ones. Contents of ammonia-N (P<0.001) and total VFA (P<0.01~P<0.001) were higher for non-extracted silages than for extracted ones. Acetate proportion was increased (P<0.001) in buffer extracted silages while those of propionate and butyrate were decreased (P<0.001) up to 24h incubation. Increased (P<0.001) total gas production was obtained from non-extracted silages up to 12h while gas production was increased (P<0.01) in extracted ones thereafter. In vitro degradation of dry matter and CP was increased (P<0.001) in non-extracted silages but that of neutral detergent fiber was increased (P<0.001) in extracted ones without difference among silages. Difference in mean values of degradability for each silage prior to- and post extraction with borate buffer, however, was not found among silages. It may be concluded that high NPN content of silages may reduce the protein availability in silages and borate buffer soluble components in silages can stimulate the early stage of fermentation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1702-1705
• /
• 2016

We propose a novel hydrogen-reduced p-type amorphous silicon oxide buffer layer between $TiO_2$ antireflection layer and p-type silicon window layer of silicon thin film solar cells. This new buffer layer can protect underlying the $TiO_2$ by suppressing hydrogen plasma, which could be made by excluding $H_2$ gas introduction during plasma deposition. Amorphous silicon oxide thin film solar cells with employing the new buffer layer exhibited better conversion efficiency (8.10 %) compared with the standard cell (7.88 %) without the buffer layer. This new buffer layer can be processed in the same p-chamber with in-situ mode before depositing main p-type amorphous silicon oxide window layer. Comparing with state-of-the-art buffer layer of AZO/p-nc-SiOx:H, our new buffer layer can be processed with cost-effective, much simple process based on similar device performances.

• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.38-43
• /
• 2007

Pulsation is an inherent phenomenon in reciprocating compressors. It interacts with piping to cause vibrations and performance problems. Indiscriminately connecting to a compressor can be dangerous and cost money in the form of broken equipment and piping, poor performance, inaccurate metering, unwanted vibration, and sometimes noise. Piping connected to a compressor can materially affect the performance and response. To minimize these detrimental effects, reciprocating compressor system should be equipped by pulsation suppression system. The system usually comprises bottle volume, called snubber. Snubber is one of the most important parts in hydrogen compressing system. It has installed reciprocating hydrogen compressor. One of these components is snubber which has function to reduce pulsation waveform and to remove the impurities in the hydrogen gas. A snubber has an inclined plate as a buffer, which is installed inside snubber. When the pressure loss and the pulsation of pressure within a snubber is minimized, the snubber could get more applicability. Therefore, a study to find an optimum geometric size on a several snubbers which have different buffer width, has been conducted using a numerical analysis.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.3
• /
• pp.133-138
• /
• 2013

We have developed a 2D axi-symmetric numerical model for an inductively coupled plasma system in order to analyze gas mixing effect through a narrow gap shower head. For frictional flow, holes of 0.5 mm diameter and 2 mm length are approximately modeled in 2D. Gas velocity distribution 10 mm below the shower head showed 2 times difference between the center and the edge at 10 mTorr. At 10 mm above the wafer, it was increased to 6 times difference due to the pumping duct effect. The model with a 5 mm height buffer region of a shower head showed reasonable behavior of Ar discharge. The density of Ar metastable showed additional peak inside the buffer region around the edge holes.

• Mass Spectrometry Letters
• /
• v.10 no.1
• /
• pp.27-31
• /
• 2019

In this article, the properties of ${CO_2}^+(CO_2)_n$ clusters in a Paul ion trap have been investigated using mass-selective instability mode which conducted by chosen precursor ions, mainly $Ar^+$ and ${CO_2}^+$ produced by a mixture of Ar and $CO_2$. Exposure of ${CO_2}^+$ ions to $CO_2$ molecules, lead to the formation of ${CO_2}^+(CO_2)_n$ clusters. Here, Ar gas react as a buffer gas and lead to form ${CO_2}^+(CO_2)_n$ cluster by collisional effect.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.82-85
• /
• 2002

In recent years, the tantalum nitride(TaN) thin-film has been developed for the electronic resistor and capacitor. In this papers, this study presents the surface profile and sheet-resistance property relationship of reactive-sputtered TaN thin film resistor processed by buffer of Ti and Cr on alumina substrate. The TCR properties of the TaN films were discussed in terms of reactive gas ratio, ratio of nitrogen, crystallization and thin films surface morphology due to annealing temperature. It is clear that the TaN thin-films resistor electrical properties are low TCR related with it's buffer layer condition. Ti buffer layer thin film resistor having a good thermal stability and lower TCR properties then Cr buffer expected for the application to the dielectric material of passive component.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.339-340
• /
• 2006

AC spark discharge voltage of SF6/CO2and SF6/N2 containing various mixed rate in volume percent (1, 5 and 10%) of SF6 in non-uniform fields are investigated. The needle to plane electrode gap spacing was 5 and 10 mm, and the gas pressure was varied within the range of 0.1~0.7 MPa. We have observed a N-characteristic typical for the electronegative gases even in gas mixtures of 1% SF6 with CO2 and N2 as buffer gases. Especially, the materials of the needle electrode affect the insulation properties of the gas mixtures drastically. On the contrary to the case of needle electrodes made by mild steel or high carbon steel, the N-characteristics are hardly perceived in the case of stainless steel needle in this experiment.