• 한국조명전기설비학회지:조명전기설비
• /
• 제7권4호
• /
• pp.26-33
• /
• 1993

트리열화 현상을 감지하기 위한 노력으로 음향방출 펄스를 계측할 수 있는 자동계측 시스템을 자체 개발하였다.가교 폴리에틸렌(이하 XLPE라 부른다)시편에 교번전압 15[kV]을 인가했을 때 수초형 트리(bush-type tree)로의 개시 및 진전시 수초형에서 가지형(branch-type tree)으로 진전할 때는 음향방출 평균펄스 진폭(이하 펄스평균 진폭이라 부른다)이 작은 펄스가 많이 발생하였고, 가지형에서 수초형 트리로 진전할 때에는 큰 펄스진폭을 갖는 작은 수의 펄스수를 계측할 수 있다. 이로써 작은 진폭을 갖는 많은 펄스진폭 및 펄스수에 대한 3차원의 분포양상으로서 왜도(Skewness)가 방전의 특성량임을 확인하였고, 왜도를 이용한 S-평면상의 궤적(Trajectory) 변화시 원점에서 멀어질수록 파괴에 가까워짐을 알았다.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.619-626
• /
• 2016

This paper proposes the design and performance evaluation of a marine engine fault detection system using a proximity sensor for marine engine. Non-linearity is greatly reduced by using the sensor without increasing the response time by applying the CANopen protocol. The CANopen protocol enables the sensor to send initial values and measurement data. The marine engine fault detection system measures crankshaft deflection and the bottom dead center of the crosshead in real-time, which maintains stability and prevents the serious breakdown of the marine engine by use of an interlocking alarm monitoring system.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.683-689
• /
• 2016

Most outdoor solid insulators may suffer from surface degradations due to non-stationary currents that flow on the insulator surface. These currents may be classified as leakage, discharge and tracking currents due to their disturbing potencies respectively. The magnitude of these currents depends on the degree of the contamination of surface. The leakage signals are followed by discharge signals and tracking signals which are capable of forming carbonized tracking paths on the surface between high voltage and earth contacts (surface tracking). Surface tracking is one of the most breakdown mechanisms observed on the solid insulators, especially polymers which may cause severely reduced lifetime. In this study the degradations observed on polyester resin based insulators are investigated according to the IEC 587 Inclined Plane Test Standard. The signals are monitored and recorded during tests until surface tracking initiated. In order to prevent total breakdown of an insulator, early detection of tracking signals is vital. Continuous Wavelet Transform (CWT) is proposed for classification of signals and their energy levels observed on the surface. The application of CWT for processing and classification of the surface signals which are prone to display high frequency oscillations can facilitate real time monitoring of the system for diagnosis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1758-1760
• /
• 1997

Automatic detection system to detect acoustic emission pulse and fractal dimension were developed, to observe tree deterioration phenomena in LDPE. The purpose of our work are to use acoustic emission system and fractal dimension and to investigate the treeing phenomena in polymeric insulation under applied AC voltage 11[kV] with an artificial needle-shaped void(1.5[mm]) using the above system. We analyzed and phase angle-acoustic emission pulse amplitude-deterioration time ($\Phi$-AEA-t) pattern and phase angle-acoustic emission pulse number-deterioration time($\Phi$-AEN-t) pattern using statistical operators such as skewness, fractal dimension. In this paper show that the correlation of $\Phi$-AEA-t, $\Phi$-AEN-t, fractal dimension using regression analysis by the method of least squares can be used to predict the breakdown just before the breakdown occurs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.76-77
• /
• 2008

The purposes of this paper ensure for the economical efficiency, accuracy, and good applications in domestic site set up the power installations. For the efficient conduct of these purposes, there are measured the partial discharge(PD) used by current probe and compared with detected signal of UV sensor. As the results, PD generated about 35% of breakdown voltage in polymer insulator. UV signal due to high voltage in polymer insulator is detected from about 1.7mV at 30kV to about 3mV at 70kV. Signal detected by ultra-sonic is increased at about 75% of breakdown voltage abruptly. It appears that error range is increased in boundary. UV sensor is needed must use from the practical and economical points of view.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.521-524
• /
• 1997

TZDB(Time-Zero Dielectric Breakdown)법을 이용하여 CZ법으로 성장된 6인치완 8인치 실리콘 웨이퍼의 미세 결함에 대해 조사하였다. 80$0^{\circ}C$에서 $N_2$분위기로 성장시킨 SiO$_2$를 이용하여 표면에 1092계의 MOS 커패시터를 형성한 뒤. 개별 소자에 대해 I-V test를 행하고 이를 통해 얻이진 파괴전압과 누설전류값을 이용하여 결과를 디스플레이 하는 프로그램을 개발하였다. Breakdown실험을 토해서 얻어진 결과를 결정내부의 특성을 관찰하는 SPV결과와 비교함으로써 표면의 상태와 내부의 상태를 연관시키고자 하는 시도를 하였다. 결함이 존재하는 지역의 커패시터는 결함이 존재하지 않는 지역과 비교하여 상대적으로 높은 누설전류값을 보였다.

• 분석과학
• /
• 제32권4호
• /
• pp.121-130
• /
• 2019

Alumina is one of the most important ceramic materials because of its useful physical and chemical properties. Recently, high-purity alumina has been used in various industrial fields. This leads to increasing demand for reliable elemental analysis of impurities in alumina samples. However, the chemical inertness of alumina makes the sample preparation for conventional elemental analysis a tremendously difficult task. Herein, we demonstrated the feasibility of laser ablation for effective sampling of alumina powder. Laser ablation performs sampling rapidly without any chemical reagents and also allows simultaneous optical emission spectroscopy and mass spectrometry analyses. For six alumina samples including certified reference materials and commercial products, laser-induced breakdown spectroscopy (LIBS) and laser-ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) analyses were performed simultaneously based on a common laser ablation sampling. LIBS was found to be useful to quantify alkali and alkaline earth metals with limits-of-detection (LODs) around 1 ppm. LA-ICP-MS could quantify transition metals such as Ti, Cu, Zn, and Zr with LODs in the range from a few tens to hundreds ppb.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4431-4440
• /
• 2022

An advanced nuclear reactor based on molten salts including a molten salt reactor and pyroprocessing needs a sensitive monitoring system suitable for operation in harsh environments with limited access. Multi-element detection is challenging with the conventional technologies that are compatible with the in-situ operation; hence laser-induced breakdown spectroscopy (LIBS) has been investigated as a potential alternative. However, limited precision is a chronic problem with LIBS. We increased the precision of LIBS under high temperature by protecting optics using a gas protective layer and correcting for shotto-shot variance and lens-to-sample distance using a laser-induced acoustic signal. This study investigates cerium as a surrogate for uranium and corrosion products for simulating corrosive environments in LiCl-KCl. While the un-corrected limit of detection (LOD) range is 425-513 ppm, the acoustic-corrected LOD range is 360-397 ppm. The typical cerium concentrations in pyroprocessing are about two orders of magnitude higher than the LOD found in this study. A LIBS monitoring system that adopts these methods could have a significant impact on the ability to monitor and provide early detection of the transient behavior of salt composition in advanced molten salt-based nuclear reactors.

• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.47-51
• /
• 2013

A high power MOSFET switch based on a 0.35 ${\mu}m$ CMOS process has been developed for the protection IC of a rechargeable battery. In this process, a vertical double diffused MOS (VDMOS) using 3 ${\mu}m$-thick epi-taxy layer is integrated with a Zener diode. The p-n+Zener diode is fabricated on top of the VDMOS and used to protect the VDMOS from high voltage switching and electrostatic discharge voltage. A fully integrated digital circuit with power devices has also been developed for a rechargeable battery. The experiment indicates that both breakdown voltage and leakage current depend on the doping concentration of the Zener diode. The dependency of the breakdown voltage on doping concentration is in a trade-off relationship with that of the leakage current. The breakdown voltage is obtained to exceed 14 V and the leakage current is controlled under 0.5 ${\mu}A$. The proposed integrated module with the application of the power MOSFET indicates the high performance of the protection IC, where the overcharge delay time and detection voltage are controlled within 1.1 s and 4.2 V, respectively.

• 자원환경지질
• /
• 제40권5호
• /
• pp.563-574
• /
• 2007

LIBS는 시료 표면에서 발생된 플라즈마로부터 방출되는 원자들의 분광선을 측정함으로써 물질의 화학적 조성을 감지, 확인, 정량화할 수 있는 최신의 분석기술로 기존의 전형적인 원소분석방법에 비해 현장분석기술로서의 더 많은 장점을 가지고 있다. LIBS는 최소한의 시료로 복잡한 분석과정을 피함으로 신속한 분석을 가능케 하고, 기기의 다방면적의 적용가능성과 단순함으로 인해 신속하게 가스, 고체, 액체상에서 다원소를 동시에 분석할 수 있는 레이저 기반의 분석기술로 지구화학적 분석, 탐사 혹은 환경분석에서 현장 이동성을 가진 센서로의 가능성 측면에서 매력적인 도구가 된다. 그러나 현장분석기술로서 토양환경에 적용하기에는 여전히 해결해야 할 문제들이 있다. 문헌연구를 통해 기본적인 작용원리인 플라즈마 형성과 물질붕괴과정을 고찰하고 현장분석기술로서 LIBS의 현 위치를 살펴본다. 또한 토양환경에 적용하기 위해 매질의 특성, 레이저 특성 및 분석신호에 영향을 미치는 다양한 인자들을 살펴보아 LIBS에 대한 기본적 이해를 돕고자 한다. 또한 분석에 미치는 영향 인자들을 보정해 분석 결과의 정확도, 정밀도 및 검출 한계 등 분석의 질을 향상 시킬 수 있는 기법 등을 다양한 문헌 연구를 통해 살펴봄으로써 추후 국내 토양환경분야의 LIBS 현장기술의 적용가능성을 고찰해보고자 한다.