• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.50-61
• /
• 2015

The merits of activated carbon for removal of organic compounds have been well known in the various industrial fields. Fixing methods with activated carbon in the non-woven fabric have the advantages of fast adsorption and ease of handling when compared with bonding and coating methods. In this study, we have examined deodorization of non-woven fabrics fixed with activated carbon. We have been tested the deodorization of various kinds activated carbon and non-woven fabric structures. The effective mixing ratio of activated carbon was 5% on the weight of fabrics, which are closely related to the fabric structure. The activated carbon with higher mesh size show the better deodorization effect.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.702-705
• /
• 2005

Metallic sandwich plates with Inner dimpled shell subjected to 3-point bending have been analyzed and then optimized for minimum weight. Inner dimpled shells can be easily fabricated by press or roll with high quality precision and bonded with same material skin sheets by resistance welding or adhesive bonding process. Optimized shape of inner dimple is a hemispherical shell to minimize weight without failure, including face yielding, face buckling and inner dimple buckling. It is demonstrated that bending stiffness of sandwich plate is 2 or 3 times than solid plates with same strength

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.421-425
• /
• 2007

In the fabrication of dry adhesive structure, increasing contact-points or contact-area is the primary goal because the adhesive force grows in proportion to the contact-area. The simplest way to extend the contact surface is the fabrication by using soft materials. However, the column-array structure could confront the matting phenomenon which columns are stuck together. Therefore, we need a novel design to reduce the effective stiffness with adequate stiff materials like a gecko's setae. In this study, we propose a novel design for the dry adhesive structure. Moreover, we analyzed whether the adhesive structure conforms the rough surface sufficiently through finite element method adopted the non-bonding interaction as the body force. Also, we fabricated the novel structures via UV lithography and some techniques. In addition, we examined the adhesive force of the novel structures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.761-767
• /
• 2007

In this paper, we deal wih a concurrent dual band low noise amplifier for a Radio Frequency Identification(RFID) reader operating at 912MHz and 2.45GHz. The design of the low noise amplifier is based on the TSMC $0.18{\mu}m$ CMOS technology. The chip size is $1.8mm\times1.8mm$. To improve the noise figure of the circuit, SMD components and a bonding wire inductor are applied to input matching. Simulation results show that the 521 parameter is 11.41dB and 9.98dB at 912MHz and 2.45GHz, respectively The noise figure is also determined to 1.25dB and 3.08dB at the same frequencies with a power consumption of 8.95mW.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.408-411
• /
• 2008

In an attempt to enhance luminance efficiency and to reduce discharge delays of test panels with aluminum fence-electrodes, various designs of the electrodes were prepared by chemically etching the aluminum foils bonded to soda-lime glass substrate via anodic bonding process. The effects of fence design on luminance and discharge characteristics were investigated and compared with conventional ac-PDPs. These results showed a possibility of using fence-type aluminum electrode at front plates of ac-PDDs without sacrificing its performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.483-486
• /
• 2014

Although flip-chip interconnects have smaller parasitics than bonding wires, they should be carefully designed at 60 GHz. Insertion loss at a flip-chip transition may differ as much as 2 dB depending on design parameters. In this paper we present a comprehensive sensitivity analysis to optimize the flip-chip transition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.11
• /
• pp.1767-1776
• /
• 2001

For the stable operation of high speed air spindle, the low rotational inertia and high damping ratio of spindle shafts as well as high fundamental natural frequency are indispensable. Conventional steel spindles are net appropriate for very high speed operation because of their high rotational inertia and low damping ratio. In this study, a high speed spindle composed of carbon fiber epoxy composite shaft and steel flange was designed for maximum critical speed considering minimum static deflection and radial expansion due to bending load and centrifugal force during high speed relation. The stacking angle and the stacking thickness of the composite shaft and the adhesive bonding length of the 7teel flange were selected through vibrational analysis considering static and thermal loads due to temperature rise.

• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.333-338
• /
• 2005

We examined the antimicrobial effects of the cotton fabrics which were laundered at different conditions and treated with a colloidal silver solution using Staphylococcus aureus. Colloidal silver solution was made from commercial colloidal silver generator by electrolysis. The fabric which was innoculated and washed with water before drying had no more Staphylococcus aureus, but which was innoculated and dried before washing with detergent solution had lower reduction rate. The fabric washed with oxygen bleach did not have an antimicrobial effect, but rinsed with 0.07% fabric softener showed antimicrobial properties. The fabric rinsed with 0.7ppm colloidal silver solution had better antimicrobial effects. As the treating concentration of silver solution increased, the antimicrobial property of the fabric was increased. The fabric treated with 5% silver solution sustained reflectance and whiteness of untreated fabric. The colloidal silver treated fabric lost antimicrobial property after washing because nano-sized silver particles were located on uneven fiber surface without chemical bonding forces.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.141-146
• /
• 2011

In the TV manufacturing industry, a demand for chic design of TVs is increasing. As a reult of this trend in TV design, more curved surfaces in a TV cabinet are introduced, which enforces the use of fixers to combine a front cabinet with a TV main body. In this paper, we introduce a robot system for attaching various types of fixers to a TV cabinet. The developed system consists of three main blocks. The first one is the dispensing block, in which transferred cabinet is centered and UV adhesives are dispensed on the cabinet. The second one is the fixer attaching block, in which a cabinet is centered again and fixers are attached to pre-determined places on a cabinet by a robot with several end effectors. The last one is the UV hardening block, in which very strong ultraviolet rays are applied to the cabinet for attaching fixers tightly to the cabinet. The developed system is successfully adopted in a TV manufacturing process.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.4
• /
• pp.298-307
• /
• 2007

In recent years, researchers are actively investigating new methods that are applicable for manufacturing micrometer to nanometer scale structures. Among them, optical tweezers that can manipulate microscopic objects using a laser is receiving one of the key attentions. Optical tweezers have been used actively in the field of science. For example, for measuring mechanical characteristics in the scale of piconewtons or for manipulating and sorting large numbers of particles, bacteria, cells. etc. However, little works have been reported for "manufacturing" objects. In this paper, we present a new method for manufacturing micrometer scale structures using micrometer scale biotin coated polystyrene particles. Particles will be controlled with a user interface that utilizes a CyberGlove and glued together by the bonding force between biotin and streptavidin.