• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.29-43
• /
• 2015

Objective: The aim of this study is to develop management guidelines and a procedure for an anthropometric suitability assessment of the main control room (MCR) in nuclear power plants (NPPs). Background: The condition of the MCR should be suitable for the work crews in NPPs. The suitability of the MCR depends closely on the anthropometric dimensions and ergonomic factors of the users. In particular, the MCR workspace design in NPPs is important due to the close relationship with operating crews and their work failures. Many documents and criteria have recommended that anthropometry dimensions and their studies are one of the foremost processes of the MCR design in NPPs. If these factors are not properly considered, users can feel burdened about their work and the human errors that might occur. Method: The procedure for the anthropometric suitability assessment consists of 5 phases: 1) selection of the anthropometric suitability evaluation dimensions, 2) establishment of a measurement method according to the evaluation dimensions, 3) establishment of criteria for suitability evaluation dimensions, 4) establishment of rating scale and improvement methods according to the evaluation dimensions, and 5) assessment of the final grade for evaluation dimensions. The management guidelines for an anthropometric suitability assessment were completed using 10 factors: 1) director, 2) subject, 3) evaluation period, 4) measurement method and criteria, 5) selection of equipment, 6) measurement and evaluation, 7) suitability evaluation, 8) data sharing, 9) data storage, and 10) management according to the suitability grade. Results: We propose a set of 17 anthropometric dimensions for the size, cognition/perception action/behavior, and their relationships with human errors regarding the MCR design variables through a case study. The 17 selected dimensions are height, sitting height, eye height from floor, eye height above seat, arm length, functional reach, extended functional reach, radius reach, visual field, peripheral perception, hyperopia/myopia/astigmatism, color blindness, auditory acuity, finger dexterity, hand function, body angle, and manual muscle test. We proposed criteria on these 17 anthropometric dimensions for a suitability evaluation and suggested an improvement method according to the evaluation dimensions. Conclusion: The results of this study can improve the human performance of the crew in an MCR. These management guidelines and a procedure for an anthropometric suitability assessment will be able to prevent human errors due to inadequate anthropometric dimensions. Application: The proposed set of anthropometric dimensions can be integrated into a managerial index for the anthropometric suitability of the operating crews for more careful countermeasures to human errors in NPPs.

• Journal of the Korean Society of Costume
• /
• v.50 no.5
• /
• pp.65-75
• /
• 2000

The purpose of this study was to survey about the suitability of maternity dresses on the market and thus to contribute for the maternity dress makers to produce clothes which are ergonomic and wanted by customers. The chief designers of the two major maternity dress makers were questioned about design and production planning, and 195 subjects who had an experience of delivery within a year were questioned about their consumer behavior, preference, and body fitting. The suggestions according to the results of the questionnaire of maternity dress makers and customers were as follows : 1. The most important item, an one-piece dress should be produced a lot more than other items. 2. The designs of maternity dress should be more simple, sophisticated, and natural. 3. The colors of pastel tone rather than trendy colors should be used. 4. The materials of maternity dress should be washable and able to help pregnant women's activity. 5. The front patterns of maternity dress should have more ease than the back patterns have, to cope with increasing abdominal girth and bust girth.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.3_4 s.141
• /
• pp.523-534
• /
• 2005

This study was to examine the factor structure of pursuing benefit and satisfaction at casual and official wear, to analyze the differences of pursuing benefit, satisfaction, and clothing purchase behavior among the consumer groups segmented by store pursuing benefits, and to provide useful information for establishment of marketing strategies. The subjects were 500 female consumers experienced in purchasing clothes at fashion outlet stores. A total of 500 questionnaires were analyzed with $X^2$-test, ANOVA, factor analysis and Duncan's multiple range test. The results were as follows: 1. Pursuing benefit and satisfaction at casual wear and official wear were composed of 5 factors. 2. Pursuing benefit and satisfaction at casual and offcial wear, and clothing purchasing behavior variables such as informants, frequency of purchase, shopping time, and average monthly expenditure on clothes were significantly different among the 3 segmented groups. Product pursuing group was shown to seek higher level of esthetic feeling, suitability for self image and body, fsshion and symbolic meaning of brand than other groups in casual and official wear and to be most satisfied at symbolic meaning of brand, social recognition, and practicality in casual wear of outlet and at suitability and social recognition in official wear of outlet. Store convenience pursuing group was shown to seek higher level of suitability for self image and body, quality, and practicality than other groups in casual and official wear and to be most satisfied at quality and practicality in casual wear of outlet and at practicality and suitability in of cial wear of outlet. Price pursuing group was shown to seek and to be most satisfied at practicality in casual and official wear of outlet.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.5-12
• /
• 2000

The gaps between the die margin worked and the casting body were measured with an optical microscope and compared after making crown prosthetic materials using three kinds of die material - dental stone, extra hard stone, epoxy resin - used in crown prosthesis. The results are as follows : 1. All the gaps between the cast cervical margin and the casting bodies were relatively good regardless of die materials used with the gaps under $50{\mu}m$, the allowable limit. 2. The cervical margin suitability of epoxy resin die was the highest among the three kinds of die material with the suitability value of $30.28{\pm}12.67$. 3. Among the four surfaces(buccal, lingual, mesial, distal) of all the casting bodies, buccal surface was the highest in the cervical margin suitability with the value of $25.93{\pm}15.51$.

• The Research Journal of the Costume Culture
• /
• v.16 no.2
• /
• pp.219-234
• /
• 2008

The purpose of this thesis is to conduct research on the degree of satisfaction (for both wearing and functioning) of cycle wear; to present the basic data to develop cycle wears which can lesson the trouble for human body and have an excellent feeling in wearing. To inquire the degree of satisfaction, the method of questionnaire was used for 100 peoples consisted of male cycling players. As the result of the satisfaction degree in wearing, it can be certain that the users are satisfied overall and yet they express the lowest satisfaction at material among material, design, color and function. When it comes to unsatisfactory factors of wearing cycle wear, the most unsatisfactory one is the poor function of clothing on the whole. As the result of the site suitability of cycle wear, we can find the problems on the girth of neck and armhole of the upper garment, and on the part from waist to hip length and the girth from thigh through knee to calf of lower garment. As the result of the motion suitability of cycle wears, we can acknowledge that there are problems on the part of neck, armpit, and abdomen of the upper garment rather than the lower one.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.1-16
• /
• 2021

This study classified short adult male body types and identified characteristics by body type according to Size Korea's 7th human system measurement data for men in their 20s to 60s. There were four body types for short adult males. Type 1 was a 'short bird legs-normal body shape' with an average body size, low body height, short torso length, thin legs, and no sagging shoulders. Type 2 was a 'short torso thin body' with a small body size, a slim body, a high body height, a short torso length and no sagging shoulders. Type 3 was a 'thick leg-overweight body shape' with a large body size, thick legs, low body height, small shoulder length and obesity. Type 4 was a 'long bird legs-normal body' with a normal body size, high body height, thin legs, long torso and sagging shoulders. The development of clothing design and pattern reflecting the body shape characteristics of short adult males should be improved to fit clothing and suitability. It is necessary to increase the satisfaction of ready-to-wear for consumers with various body types by adding the size for shorter men through a subdivision of the ready-made size system.

• Journal of Korean Medical classics
• /
• v.19 no.3
• /
• pp.165-183
• /
• 2006

A study of scientific methods in a study of comparative on the oriental medicine and the western medicine evidence to find on the cause-effect relationship. The rationality in a study of process and the confidence in a study of result were improved by a study of methods on the cause-effect relationship. Also a comparative study on the Jeong(精) of the oriental medicine and the cell of the western medicine, after established a model of the cause-effect relationship secured a suitability of a comparative subject and operationalization of a comparative variable to the rationality in a study of process. The Jeong(精) and the cell are the character of a unit and the character of a matter on the human body. The Jeong(精) and the cell are a point of similarity in the function. The Jeong(精) and the cell are a relation in the mechanism. Our paper reviewed a study of comparative methods on the oriental medicine and the western medicine, and suggest an identic interpretation on the human body.

• Journal of the Korean Home Economics Association
• /
• v.40 no.12
• /
• pp.189-197
• /
• 2002

The purpose of the study is to analyze the suitability of ready-to-wear apparels for adult women by considering their body types. 341 women aged from 20 to 60 were surveyed for this study. The survey was taken from November, 1999 through November, 2000. The subjects were classified into 4 groups(thin, normal young aged, normal middle aged, fat) according to BMI and Rohrer index. For data analysis, descriptive statistics, crosstabs, F-test, Duncan-test were used. As the result, it is our findings that, in purchasing clothes, especially in case of pants, people choose them mostly based on waist and hip. However, in that the normal young aged group bases thigh circumference, we need to consider such points. As for one-piece, height was an important factor, while chest was the most important factor for the fat group. In relation to the suitability of ready-to-wear garments, the groups showed significant differences for blouses, one-pieces, and jackets, respectively. Blouses didn't fit 29.8% of the fat group, and one pieces fitted thin or normal subjects to some extent. However, one pieces didn't fit 34% of the fat group while jackets didn't fit 51.4% of them. This result shows that there are difficulties in choosing clothes dependent on body types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1015-1025
• /
• 2003

This paper proposes a method for constructing the virtual characters adopting the personal body types for the clothing coordination. At first, the method produces the 38 kinds of the Korean 3D body models considering sex, ages and body types, and constructs model DB. We select a model similar to the personal body size from DB and deform the selected model according to body size. The method deforms the model linearly for height 12 items, width 6 items, depth 5 items and round 13 items, and constructs the personal character fitted to the personal body size. The preprocess for model deformation consists of grouping for body part and establishing the feature points. Linear deformation for each group leads us to easy construction of the virtual personal characters. This method has two advantages as follows: 1. Large reduction of man power, cost and time for DB construction of the body 3D models, since the preprocess permits us to effectively use the various body models whose geometrical structures are different, 2 Suitability to Web-based clothing coordination, since the body deformation method is simple and its speed is very high.