• Archives of Reconstructive Microsurgery
• /
• v.25 no.2
• /
• pp.29-36
• /
• 2016

Purpose: Skin grafting is used for the transfer of cutaneous tissue from one site of the body to another. To improve graft survival, close contact between the graft and the wound bed is essential for vessels to grow across the gap. Here, we introduce an easy and efficient dressing method to improve graft survival. Materials and Methods: A retrospective chart review was performed to identify patients who underwent split thickness skin graft and negative pressure wound therapy (NPWT) or conventional treatment between January 2007 and April 2015. Overall, 25 consecutive patients were included in the NPWT group and 49 were included in the conventional dressing group to compare the outcome of the procedure. The data were obtained from medical records, including age, sex, cause of the skin defect, size of graft, time for healing, wound preparation time, and complications. Results: Of the NPWT group, the average wound size was $147.04{\pm}146.74cm^2$ (range, $9{\sim}900cm^2$). With the exception of one patient, all wounds healed without the need for further procedure. The average duration of time required for the NPWT group, which was defined as removal of stitches (or staples) and no need for additional active dressing, was $6.4{\pm}1.97days$ (range, 5~15 days). The average time for the conventional dressing group was $10.78{\pm}2.38days$ (range, 5~15 days). Conclusion: NPWT can be used to cover regions in which wound healing does not occur fully or when neither tie-over nor compressive dressings are applicable. This treatment also reduced wound healing time and allowed earlier patient mobilization and hospital discharge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2770-2776
• /
• 2015

The development of efficient wearable antennas is required to implement short range body-centric wireless communication links for various internet of thing applications. We present simulation and measurement results of conductive-fiber-based wearable antennas which can comfortably fabricated directly on usual clothing materials. The proposed antenna is a form of a rectangular patch antenna designed by weaving conductive fibers on a felt substrate. A full-wave electromagnetic simulation tool is used to investigate the antenna performance such as antenna impedance, resonant frequency, and radiation efficiency. Parametric studies show that the radiation efficiency increases from 67.5% to 70.4% by widening the gap between conductive fibers from 0.25mm to 3mm. This implies a wearable antenna with good radiation efficiency can be designed despite of less portion of conductive fibers on the antenna. The simulation results are also verified by measured results with fabricated antennas.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.

• Herbal Formula Science
• /
• v.10 no.2
• /
• pp.1-4
• /
• 2002

The development of Korean Oriental medicine is based upon the accumulation of experience and knowledge gathered over the centuries. The approaches taken are holistic and empirical. There is a need to understand their actions at molecular levels with more rational, objective and scientific studies. Today it appears that Chronic and age-associated diceases may be multifactorial and hence more complex. A different approach may be required. One claimed usage of Korean Oriental medicine is for the treatment and prevention of chronic and age-associated illnesses. Some of the botanical formulas used for this purpose were discovered thousands of years ago and continue to be used today. There are indications that these formulas may indeed be helpful in the treatment or prevention of chronic diseases. This multi-component medicine could not only be very useful meeting the unmet clinical needs but for defining a more synergistic therapy that supports and maintains the bodies natural curative abilities. The potential usefulness of Korean Oriental medicine embodies the belief of maintaining healthy homeostasis of the body through the proper balance of a mixture of chemical at different organs or tissues. This concept is different from western medicine and implies that multiple compounds may act on multiple mechanisms of action to maintain the balance of the complex web of biology. This is very important in view of sciences current direction to integrate fragmented information to develop future medicines. The western and eastern approaches to human health and disease are complementary to each other. The best approach in developing future medicines is to integrate both approaches.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.77-83
• /
• 2008

According to the development and expansion of software and hardware about recent information technologies(IT), disabled persons in using IT seem to feel more information gap. Devices for IT are important tools for users including disabled persons to communicate with each other and get information. Although the Korea faces ageing society rapidly, products for disabled persons are seldom shown in time for use. As getting older especially, one of the body function disorders is visual disturbance. There are tools, braille lettering, for disabled persons with visual disturbance to communicate or get information from book. Compared to general books, however, braille lettering book is lack of including all of information of our society. Therefore, in this paper, we implement and show an embedded system for disabled person with visual disturbance to get information by scanning text, extγacting characters and converting the text to speech automatically.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.288-297
• /
• 2012

This study proposes a design model of the variable type resonator which corrects the temperature variance according to the season, in order to maximize the resonance effect in the Sacred bell of the Great King Seongdeok. In the bell, the 1st natural frequency (64 Hz) and the 2nd natural frequency (168 Hz) are the most important partial tones. Resonance conditions of the two components are determined for the internal acoustic cavity system, which consists of bell body cavity, gap and the resonator. Acoustic frequency response characteristics of the internal cavity are determined by the boundary element analysis using SYSNOISE. As an external factor, temperature variance according to the season largely influences the resonance condition and the length of the resonator should be controlled to maximize the resonance effect. As a measure, this study proposes a design model of the variable type resonator for the Sacred Bell of the Great King Seongdeok, which can control the length at the belfry according to the season.

• The Research Journal of the Costume Culture
• /
• v.20 no.1
• /
• pp.36-48
• /
• 2012

This study intends to provide fundamental data to develop creative high-value designs, proving that the cut-out technique, a decorative element of fashion design, can be used to express various visual effects. The author performed a literature review of such publications as Gap Press, Fashion News, and Mode & Mode from 2001S/S to 2010S/S, referring to Internet data to empirically analyze the cut-out technique in contemporary fashion. The study found that the cut-out design is effective overall, but is best suited for one-piece designs and for partial rather than whole items of clothing. The basic motif of the cut-out is a geometrical pattern based on a line, a tear, or is shapeless. The cut-out design is mostly shown as an overall pattern or as a symmetrical shape. Analysis shows that the characteristics of the contemporary fashion utilizing the cut-out technique are as follow: First, the cut-out technique exposes the curves of a woman's body in a direct or indirect way, thereby emphasizing her sexuality and maximizing the value of female beauty. Second, through the cut-out technique, we can highlight the various types of space formed by the technique and repeated patterns; we may also elaborate on single-patterned laser-cut designs, which will show that the particular surface effect of the material can strongly impact the attractiveness of the design through emphasis and decoration. Third, damaging or destroying clothes on purpose, showing surprising concepts through optical illusions, and expressing humor by ignoring existing clothing styles show our willingness to escape from traditional or obvious design ideas, as well as demonstrating individuality and playfulness.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.572-582
• /
• 1989

Elastic deformations of an infinitely long strip and a beam loaded by uniform pressure upon their upper surfaces, with the fixed-free end dondition, are considered within the range of small strains. All local governing equations are satisfied up to first order in strains, and to take into account the higher order terms neglected in the local governing equations, the overall equilibrium is imposed exactly up to the leading order. The success of the approach relies upon the semi-inverse method and the decomposition of deformations in which the classical linear theory guides the solution. The solution bridges the gap between the two extremes-the classical solutions valid only for infinitesimal deformations and the solutions form the technical theories for deformations with large rotations. The solutions may be used to confirm the technical theories and to verify numerical solutions obtained from finite element analysis.

• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.48-53
• /
• 2012

The purpose of this paper studies the failure cases including with system of liquefied phase injection in liquified petroleum gas vehicle. The first case, resulting with inspection the injector of LPG, it occasionally certified the injection damage phenomenon that the fuel efficiency(km/l) was decreased to 5% by carbon deposit with injector hole when the driver operates the vehicle. The second case, it certified the interference phenomenon of air flow with carbon deposit in ISA system control for idle speed of engine and throttle body suppling air into engine. As a result, the fuel efficiency was decreased 7%. The third case, the outer air during intake stroke was intermittently flowed in this gasket gap because of weaken adhesion power phenomenon for cylinder block by intake manifold gasket tearing. Consequentially, it certified the decrease for fuel efficiency to 3% by risen the amount of fuel injection as the air inflow quantity. These failure examples reduced the power performance of engine and the fuel efficiency of vehicle. It have to minimize of failure phenomenon preparing through quality management.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.2
• /
• pp.129-134
• /
• 2003

In this research, we used fly-ash and blast-furnace slag as substitute material of cement and fine aggregate, and we, through experiments, researched and analyzed the features of high-flowable concrete added high efficiency AE water reduction agent. The results are below. 1. Liquefaction generally presented high-slump flow value; on the other hand, partial segregation was observed in case of mixing proportion with 65 cm slump flow and above. This segregation was partially improved in accordance with mixing admixture. 2. Compressive strength according to mixing admixture and increasing mixing ratio of fly-ash were subject to be declined when it was initially cast-in, but its gap was improved when time was fully passed. 3. After mixing blast-furnace slag and fly-ash as substitute material, the result showed that the modulus of elasticity against freezing & melting was improved according to mixing blast-furnace slag and also increased in accordance with increasing pulverulent-body volume. 4. According to increasing the mixing volume of fly-ash, the durability factor was deteriorated because compressive strength became lower as well as air content was decreased when it was initially case-in. 5. The minimum air content to secure durability was 3.7%, for that reason, we had better secure admixture such as air entraining agent when cast-in high-flowable concrete.