• 한국환경과학회지
• /
• 제31권3호
• /
• pp.247-254
• /
• 2022

This study investigated the effect of vegetation mat on plant growth and salt reduction in the soil treated with high concentration deicing salt. In order to measure soil chemical characteristics and plant growth, three native groundcover plants (Dendranthema zawadskii var. latilobum, Dendranthema boreale, and Kalimeris yomena) were grown in each of the three plastic containers (50.0 cm width × 35.0 cm length × 8.5 cm deep) with a high concentration treatment of calcium chloride deicing salt. There were two treatments: control, and BVM that combines B (blanket) and VM (vegetation mat). 1,600 g of soil was placed on the top of the drainage layer with 290 g of perlite, 100 seeds each of the three native plants with three repetitions were sowed, and 10 g/L of calcium chloride deicing salt was added in the treatment. As a result of the chemical properties of soil, soil in control treatment was acidic and soil electrical conductivity in BVM was the lowest. Also, exchangeable cations (K⁺, Ca²⁺, Na⁺, and Mg²⁺) in soil and all the three plants were significantly decreased in the BVM treatment. Meanwhile, the germination rate of Dendranthema zawadskii var. latilobum was the highest under high concentration deicing salt in compared to the two plants. Overall, three native groundcover plant growth was higher in the BVM than control treatment significantly. These results suggest that the treatment of blanket vegetation mat has a positive effect on soil and plant growth in soil damaged by deicing salt.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4274-4281
• /
• 2023

Blanket is of vital importance for engineering application of the fusion reactor. Nuclear heat deposition in materials is the main heat source in blanket structure. In this paper, the three-dimensional method for thermal-hydraulics/neutronics coupling analysis is developed and applied for the full-scale module of the helium-cooled ceramic breeder tritium breeding blanket (HCCB TBB) designed for China Fusion Engineering Test Reactor (CFETR). The explicit coupling scheme is used to support data transfer for coupling analysis based on cell-to-cell mapping method. The coupling algorithm is realized by the user-defined function compiled in Fluent. The three-dimensional model is established, and then the coupling analysis is performed using the paralleled Coupling Analysis of Thermal-hydraulics and Neutronics Interface Code (CATNIC). The results reveal the relatively small influence of the coupling analysis compared to the traditional method using the radial fitting function of internal heat source. However, the coupling analysis method is quite important considering the nonuniform distribution of the neutron wall loading (NWL) along the poloidal direction. Finally, the structure optimization of the blanket is carried out using the coupling method to satisfy the thermal requirement of all materials. The nonlinear effect between thermal-hydraulics and neutronics is found during the blanket structure optimization, and the tritium production performance is slightly reduced after optimization. Such an adverse effect should be thoroughly evaluated in the future work.

• 유기물자원화
• /
• 제16권3호
• /
• pp.75-82
• /
• 2008

상향류 혐기성 슬러지 블랭킷 반응조을 이용한 프로피온산의 처리시 고농도 황산염의 영향을 조사하였다. 반응조의 평균 유기물 부하와 수리학적 체류시간은 $1.2kg \;COD/m^3{\cdot}d$와 1.6일로 유지하였다. 황산염이 없는 조건에서 UASB 반응조의 경우 95%의 COD 제거율을 보였으며 황산염이 $2,000mgSO_4^{2-}/L$로 존재하는 경우 용존 황화물의 영향으로 COD 제거율이 83%로 감소하였다. 메탄 생성균과 황산염 환원균의 경쟁관계를 평가하기 위하여 미생물의 상호작용에 관해 조사하였다. $COD/SO_4^{2-}$ 비가 1인 경우 이용 가능한 전자 수용체의 평균 58%가 메탄 생성균에 의해 이용되며 나머지가 황산염 환원균에 의해 사용되었다. 초산과 프로피온산을 기질로 이용한 비메탄 활성도의 경우 미생물이 기질에 적응함에 따라 증가하였다.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2174-2183
• /
• 2021

Helium cooled solid breeder blanket as an important blanket candidate of the Tokamak fusion reactor uses ceramic pebble bed for tritium breeding. Considering the poor effective thermal conductivity of the ceramic breeder pebble bed, thin structure of tritium breeder pebble bed is usually adopted in the blanket design. The container wall has a great influence on the thin pebble bed packing structure, especially for the assembly of mono-sized particles, and thin pebble bed will appear anisotropic effective thermal conductivity phenomenon. In this paper, thin ceramic pebble beds composed of 1 mm diameter Li₄SiO₄ particles are generated by the EDEM 2.7. The effective thermal conductivity of different thickness pebble beds in the three-dimensional directions are analyzed by three-dimensional thermal network method. It is observed that thin Li₄SiO₄ pebble bed showing anisotropic effective thermal conductivity under the practical design size. Normally, the effective thermal conductivity along the bed vertical direction is higher than the horizontal direction due to the gravity effect. As the thickness increases from 10 mm to 40 mm, the effective thermal conductivity of the pebble bed gradually increases.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.513-524
• /
• 1996

Laboratory investigation was conducted to evaluat the mixing effects on organic removal efficiency to treat low-strength synthetic wastewater using modified anaerobic - filter reactor combining anaerobic filter and upflow anaerobic sludge blanket. Using the modified process the low-strength wastewater like municipal sewage could be treated with 85% T-COD removal efficiency at hydraulic retention time of 6 hours. At the constant organic loading of 0.5 kg COD/m 3-day, the organic removal efficiency and effluent COD concentration are increased as influent COD concentration increased from 125 mg/l to 500 mg/l. Mixing effects on organic removal efficiency are evident and optimum mixing speed is found as 50RPM. Placing the granular sludge and media on which slime layer was pre-formed into the reactor seemed to be very effective In achieving short start-up period. Therefore, the steady state was achived after 4 weeks and 1 week based on T-COD and S-COD, respectively.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2564-2569
• /
• 2021

The neutronic analysis of Helium Cooled Ceramic Reflector (HCCR) breeding blankets has been performed using the 3D Monte Carlo code MCNPX and ENDF nuclear data library. This study aims to reduce ⁶Li percentage in the breeder zones as much as possible ensuring tritium self-sufficiency. This work is devoted to investigating the effect of ⁶Li percentage on the HCCR breeding blanket's neutronic parameters, such as neutron flux and spectrum, Tritium Breeding Ratio (TBR), nuclear power density, and energy multiplication factor. In the ceramic breeders at the saturated thickness, increasing the enrichment of ⁶Li reduces its share in the tritium production. Therefore, ceramic breeders typically use lower enriched Li from 30% to 60%. The investigation of neutronic analysis in the suggested geometry shows that using 60% ⁶Li in Li₂TiO₃ can yield acceptable TBR and energy deposition results, which would be economically feasible.

• 한국토양동물학회지
• /
• 제5권2호
• /
• pp.63-70
• /
• 2000

영국의 고원지대 (Moorland)의 이탄토양 (blanket bog peat soil에 서식하는 애지렁이 정량조사를 위한 수분갈때기추출법의 효율에 미치는 수온, 물의 량, 추출시간의 복합적인 효과를 조사하였다. 이탄 토양에서 애지렁이 추출을 위한 최적조건은 물의 양과 초기 수온에 관계없이 표면수의 최종 온도는 35$^{\circ}C$이고, 추출시간은 6시간이었다. O'Connor의 방법 (최종 온도 40-45$^{\circ}C$,열의 점진적인 증가, 3시간 추출)은 비교적 늪은 온도와 짧은 추출시간으로 인해, 추출효율에 변이가 심하였다. 열을 가하지 않고 장시간 추출하는 방식은 열을 가하는 방식에 비해 추출효율이 현저히 낮았다.

• 한국콘텐츠학회논문지
• /
• 제16권11호
• /
• pp.623-632
• /
• 2016

본 연구의 목적은 담요 제공이 Brain MRI 검사를 받는 환자들에게 미치는 효과를 알아보기 위한 것이다. 연구대상은 G시에 소재한 일 대학병원에서 Brain MRI 검사를 받는 52명의 환자였다. 실험군(n=26)은 검사 전에 담요를 제공받았다. 자료는 2015년 3월부터 12월까지 수집되었으며, chi-squared test, the independent t-test, repeated measures ANOVA를 이용하여 분석되었다. STAI로 측정된 불안은 두 집단 간에 유의한 차이가 없었으나 시각적상사척도로 측정된 불안 정도는 실험군에서 유의하게 감소되었다(t=-2.75, p=.008). 혈압과 맥박에서는 실험군과 대조군 간에 유의한 차이가 없었다. 따라서 추후에는 Brain MRI 검사를 받는 환자의 불안 정도를 경감시켜줄 수 있는 연구가 필요하다.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.49-57
• /
• 2002

The effect of mechanical parameters on chemical mechanical polishing (CMP) of blanket and patterned aluminum thin films are investigated. CMP process experiments are conducted using the soft pad and the slurry mainly composed of acid solution and A1$_2$O$_3$ abrasive. The result for the blanket film showed that as the concentration of abrasive in slurry is increased, the surface roughness gets worse but the waviness gets better. The planarity of the patterned Al films is slowly improved by CMP when the width of and gap between the patterns are relatively small. It is tried to find the optimized CMP process conditions by that the patterned Al thin film can be planarized with fine surface. The most satisfiable film surface is obtained when the applied pressure is low (10kPa) and the abrasive concentration is relatively high (5wt%).

• 한국환경과학회지
• /
• 제4권2호
• /
• pp.201-214
• /
• 1995

Design approach of upflow Anaerobic Sludge Blanket(UASB) process based on the biological kinetic parameters are known to be very difficult since the characteristics of the granular slut비e depends on the type of wastewater and size distribution of the granular sludge also depends on the upflow velocity in the UASB reactors. Furthermore, industrial wastewater containing toxic substances has been treated by UASB process without the clear knowledge of toxic effects on the granular slut형e. Hence, the present research was aimed on the intensive evaluation of biological kinetic parameters of the granular sludge in UASB reactor with and without toxic substance of 2, 4-dichlorophenol in order to present the basic design measures for UASB process design. The results could be summarized as follows. The biological kinetic parameters(k and Ks) considerably varied with the granular size of the sludge. Generally, 연e k and ks values of the granular sludge increased with the particle size of the granule. The biological kinetic parameters(k and Ks) of the granular sludge obtained from batch test were not applicable to design purpose of UASB process due to substrate diffusional limitation into the granular sludge in the completely mixed UASB reactors. The toxic effects on k and Ks greatly varied with the granular sixte. And as the toxicant concentration increased, the k value decreased while the Ks value increased. Inhibition constant(hi) for k with the toxicant of 2, 4-dichlorophenol varied from 0.5 to 2.3 depending on the granular sizes while the inhibition constant(Ki) for Ks varied from 20.7 to 80.1, showing the mixed inhibition.