• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.141-150
• /
• 2007

This paper proposes new Steganographic model for VoIP that has very effective method using low bit encoding. Most of Steganographic models using Low bit Encoding have two disadvantages; one is that the existence of hidden secret message can be easily detected by auditory, the other is that the capacity of stego data is low. To solve these problems, this method embed more than one bit in inaudible range, so this method can improve the capacity of the hidden message in cover data. The embedding bit position is determined by using a pseudo random number generator which has seed with remaining message length, so it is hard to detect the stego data produced by the proposed method. This proposed model is able to use not only to communicate wave file with hidden message in VoIP environment but also to hide vary information which is user basic information, authentication system, etc.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.1
• /
• pp.64-72
• /
• 2001

This paper is on a design of the high-speed cipher IC using IDEA algorithm. The chip is consists of six functional blocks. The principal blocks are encryption and decryption key generator, input data circuit, encryption processor, output data circuit, operation mode controller. In subkey generator, the design goal is rather decrease of its area than increase of its computation speed. On the other hand, the design of encryption processor is focused on rather increase of its computation speed than decrease of its area. Therefore, the pipeline architecture for repeated processing and the modular multiplier for improving computation speed are adopted. Specially, there are used the carry select adder and modified Booth algorithm to increase its computation speed at modular multiplier. To input the data by 8-bit, 16-bit, 32-bit according to the operation mode, it is designed so that buffer shifts by 8-bit, 16-bit, 32-bit. As a result of simulation by 0.25 $\mu\textrm{m}$ process, this IC has achieved the throughput of 1Gbps in addition to its small area, and used 12,000gates in implementing the algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.753-760
• /
• 2012

This paper is to show the character coding rule in computer and information equipment etc to improve the transmission efficiency in telecommunications. In the transmission system, the transmission efficiency can be increased by applying the proper character coding method. In datalink layer, HDSL ptotocol use FLAG byte to identify the frame to frame which consists of data bit stream and other control bytes. FLAG byte constits of "01111110". When data bit stream consist of the consecutive 5-bit "1" after "0", the decoder can not distinguish whether the data bit sequence is flag bit stream or data bit stream. To solve the problem, when the line coder in transmitter detects the consecutive 5-bits "1" after "0" in the input data stream, inserts violently the "0" after 5th "1" of the consecutive 5-bit "1" after "0". As a result, when the characters are decoded with the above procedure, the efficiency of system should be decreased. This paper shows the character code rule to minimize the consecutive 5-bits "1" after "0" when the code is given to each characters.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.37-44
• /
• 2008

This paper presented a solution to encryption and decryption problem suffering data transmission error for encrypted message transmission. Block cypher algorithms experience avalanche effect that a single bit error in an encrypted message brings substantial error bits after decryption. The proposed fault tolerant scheme addresses this error avalanche effect exploiting a multi-dimensional data array shuffling process and an error correction code. The shuffling process is to simplify the error correction. The shuffling disperses error bits to many data arrays so that each n-bit data block may comprises only one error bit. Thereby, the error correction scheme can easily restore the one bit error in an n-bit data block. This scheme can be extended on larger data blocks.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.797-800
• /
• 2005

In this paper, the designed 10-bit current steering data driving circuit consists of bias circuits, shift registers, data and line latches, level shifters, and 10-bit D/A converters. This data driving circuit can improve image quality, driving speed, and can reduce process error, DNL error, and glitch noise. To reduce current cells, the 10-bit D/A converter was designed 3+3+4 hybrid type. As a result 49 current cells are decreased. The transient analysis shows that currents flows a few of mA in data line and the currents have 1024 gray levels of current values. Total circuits are designed for 10 ${\mu}s$ speed. Thus the designed 10-bit current steering data driving circuit can be usable in HDTV/XGA AMOLED displays. These data driving circuits are designed for 0.35 ${\mu}m$ CMOS process at 3.3 V and 18 V supply voltage and simulated with HSPICE..

• Journal of Information Technology Services
• /
• v.12 no.1
• /
• pp.1-14
• /
• 2013

The government has implemented operating the bus information terminal (hereinafter, 'BIT') to use by building it at a major bus station to solve the problem of traffic congestion. Busan Metropolitan City has been continuously expanding the installation of 'BIT' since 2003. However, there are few research on the factor to use and satisfaction survey on 'BIT' from the perspective of the users. This study, in an effort to inquire into the 'BIT' utilization factor and its vitalization plan, conducted a face to face survey of 172 citizens who had the experience in the 'BIT'. The result of the data analysis showed that usability, convenience, and availability were the critical factors for a BIT use. In addition, the general intention to use 'BIT' was found to be very high as much as 90.7%. The contributions of this study are as follows. The academic contributions is that it proved the relationship between usability, convenience and the intention to use suggested by the information technology acceptance model is supported even in case of 'BIT.' For the practitioners this study provides ground data for a local government to make a plan of a BIT extension.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.260-266
• /
• 2013

The open bit line is vulnerable to noise compared to the folded bit line when read/write for the DRAM. According to the increasing DRAM densities, the core circuit operating conditions is exacerbated by the noise when it comes to the open bit line 6F2(F : Feature Size) structure. In this paper, the interference effects were analyzed by the data patterns between the bit line by experiments. It was beyond the scope of existing research. 68nm Tech. 1Gb DDR2, Advan Tester used in the experiments. The noise effects appears the degrade of internal operation margin of DRAM. This paper investigates sense amplifier power line splits by experiments. The noise can be improved by 0.2ns(1.3%)~1.9ns(12.7%), when the sense amplifier power lines split. It was simulated by 68nm Technology 1Gb DDR2 modeling.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.95-100
• /
• 2007

A low power PRAM using a power-dependant data inversion (PDI) scheme is proposed. The PRAM consumes large write power because large write currents are required during long time. Also, the power consumptions for storing #1# and #0# are different. The PDI circuit compares the power consumptions to store the original data and its inverted data, and then it stores the less power consuming data. Although the PDI scheme needs an additional inversion bit per data, the maximum and average powers of the PDI can be under 50% and 37.5% of the conventional write scheme, respectively. The average power for storing 8bit data is under 41%, due to the inversion bit. The 1K-bit PRAM chip with 128$\times$8bits was implemented with a 0.8${\mu}m$ CMOS technology with a 0.5${\mu}m$ GST cell.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3067-3069
• /
• 1999

In this paper, A bit processor for controlling sequence logic was implemented, using a FPGA. This processor consists of program memory interface. I/O interface, parts for instruction fetch and decode, registers, ALU, program counter and etc. This FPGA is able to execute sequence instruction during program fetch cycle, because of divided bus system, program bus and data bus. Also this bit processor has instructions set that 16bit or 32bit fixed width, so instruction decoding time and data memory interface time was reduced. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package. Finally, the benchmark was performed to prove that Our FPGA has better performance than DSP(TMS320C32-40MHz) for the sequence logic control of PLC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.1-9
• /
• 2002

The distribution characteristics of data retention time for DRAM was studied in connection with the probability distribution of the cell parameters. Using the cell parameters and the transient characteristics of cell node voltage, data retention time was investigated. The activation energy for dielectric layer growth on cell capacitance, the recombination trap energy for leakage current in the junction depletion region, and the sensitivity characteristics of sense amplifier were used as the random variables to perform the Monte Carlo simulation, and the probability distributions of cell parameters and distribution characteristics of cumulative failure bit on data retention time in DRAM cells were calculated. we found that the sensitivity characteristics of sense amplifier strongly affected on the tail bit distribution of data retention time.