• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.566-577
• /
• 2009

The modification of wood color occurs rapidly during the service period at indoor. It is crucial to investigate the characteristics of color change, chemical and microscopical modification of wood at indoor. Wood products made of Japanese cedar at different years were used for this work. The tests were performed in order to evaluate the degree of color change of wood surface, breakpoint of brightness from surface to inside of wood, chemical analysis with FT-IR, and microscopical characteristics using the LM and TEM. Surface color of cedar wood stored indoor were rapidly changed at early stage, particularly ${\Delta}a$ (yellow), and ${\Delta}b$ (red) values were steeply decreased for one year old indoor wood, ${\Delta}L$ (white) value was dropped until 5 years old indoor wood compared with control sample. Decrease of peaks related to polysaccharide and lignin was noticed, especially, lignin was severely degraded. Although degradation of cell wall limited only to surface layers of indoor wood, degradation pattern of indoor wood showed similar degradation pattern to natural weathering of wood during outdoor weathering or wood behavior under artificial UV irradiation.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.104-114
• /
• 2019

In the global market competition, countries and businesses are actively engaged in technology prediction activities to maximize their profits by attempting to enter and preempting the core technology of the future. In this paper, we propose a growth model based on patent application trends to predict the time to replace a product with a promising new technology to dominate the market. Although the Fisher-Pry model that Bhargava generalized to predict the emergence of promising alternative technologies was relatively satisfactory compared to the original Fisher-Pry model, it was difficult to predict the replacement rate behavior properly due to a parameter problem. The application of the Fisher-Pry Modification Model in the form of a quadratic equation through the patent trend analysis of the optical storage system for the purpose of verifying the time alternative to the light storage technology has resulted in satisfactory verification results. It is expected that small and medium-sized companies and individual researchers will apply this model and use it more easily to predict the time to replace the market for promising replacement technologies.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.4
• /
• pp.125-153
• /
• 2006

This study was intended to describe women's weight controlling by creating a hypothetic model on the weight adjustment behavior and by examining a cause and effect relationship, and to contribute to countermeasures for practicing their promotion of health and improving the quality of life through creating a predictable model. The subject of study was women who utilize the beauty shop located in Seoul, Busan and Daegu and the study period was 12 weeks from July 10 to September 30 in 2004. Gathered 1093 person's general specialty related with weight adjustment and analyzed covariance to prove the hypothesis using statistics compiled from authentic sources. Also proved coincidence of the hypothetical model. Exogenous variables of the hypothetical model are composed of recognition of her body shape, fatness level, age, stress, and self-respect. Endogenous variables are health- control mind, recognized health state, self-efficacy, intention, and behavior of weight adjustment. There were 5 measured variables for exogenous variable(x). There were 8 measured variable(y) for exogenous variable. And coincidence $x^2=297.38$, standard $x^2(x^2/df)=7.08$, GFI=0.962, AGFI=0.917, NFI=0.875, TLI=0.794, CFI=0.889, RMSEA=0.075. The result of hypothesis had an epoch-making record that 20 out of 27 hypothesis was proved positive way. Generally weight adjustment has been highly seen in housewives, the married and the old age. Health control mind seems to be high as fatness level, age, and self-respect are high and low stress. Recognized health state is high as age and self-respect are high and low stress. However, it is not much related with recognition of her body shape and fatness level. If age, self-respect, health control mind, recognized health state and self-efficacy are high intention of behavior is also high, but intention of behavior has no relation with recognition of her body shape, fatness level and stress. If fatness level, age, self-respect, health control mind, recognized health state and self-efficacy and intention of behavior are high, execution of weight adjustment will be high. However, recognized health state and stress has no influence for weight adjustment. To increase the coincidence of hypothesis and take a simple model I modified a model and then I got the coincidence $x^2=215.62$, standard $x^2(x^2/df)=6.34$, GFI=0.970, AGFI=0.931, NFI=0.902, TLI=0.901, CFI=0.915, RMSEA=0.070. This result is a bit better than original hypothetical model's so that this model might be more suitable. In this modification model, the factors of weight adjustment seems to be high according to this order self-efficacy, recognized health state, age, intention, health control mind, self-respect, fatness level and stress. With this result I suggest ; 1. Enforcement of IR that everybody can be controlled weight adjustment herself and continuous education, which is related with regular habit (food, exercise, restriction of a favorite food and behavior training etc.) is also needed. 2. Because self-efficacy is influenced to execution of weight adjustment specific program which can increase self-efficacy should have to develop and we need to utilize it to take care of herself. 3. To protect fatness and be active weight adjustment the peculiar program including the concept of self-respect, recognized health state, health control mind and intention must be developed and not only women but also all of people should be educated. 4. This hypothetical model is forecasting women's weight adjustment behavior and can be utilized for fundamental data to increase those people's health.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.6
• /
• pp.338-348
• /
• 2003

In the past decade, considerable progress has been made in developing the appropriate biotechnology for microalgal mass cultivation aimed at establishing a new agro-industry. This review points out the main biological constraints affecting algal biotechnology outdoors and the requirements for making this biotechnology economically viable. One of them is the availability of a wide variety of algal species and improved strains that favorably respond to varying environmental conditions existing outdoors. It is thus just a matter of time and effort before a new methodology like genetic engineering can and will be applied in this field as well. The study of stress physiology and adaptation of microalgae has also an important application in further development of the biotechnology for mass culturing of microalgae. In outdoor cultures, cells are exposed to severe changes in light and temperature much faster than the time scale re-quired for the cells to acclimate. A better understanding of those parameters and the ability to rapidly monitor those conditions will provide the growers with a better knowledge on how to optimize growth and productivity. Induction of accumulation of high value products is associated with stress conditions. Understanding the physiological response may help in providing a better production system for the desired product and, at a later stage, give an insight of the potential for genetic modification of desired strains. The potential use of microalgae as part of a biological system for bioremediation/detoxification and wastewater treatment is also associated with growing the cells under stress conditions. Important developments in monitoring and feedback control of the culture behavior through application of on-line chlorophyll fluorescence technique are in progress. Understanding the process associated with those unique environmental conditions may help in choosing the right culture conditions as well as selecting strains in order to improve the efficiency of the biological process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.186-194
• /
• 2009

This is a part of the extensive ongoing investigation being carried out by author to develop appropriate design procedure of the concrete member reinforced with FRP rebars instead of conventional steel rebars. This study presents the experimental results of a research programme to assess the structural characteristics of spliced rebar in reinforced concrete members with FRP reinforcement. The test variables are the diameter of FRP rebar and the embedment length. The development length (ld) was calculated according to the ACI 440 for FRP rebars in concrete. A total of 14 concrete beams reinforced with spliced FRP rebars and 4 reference beams reinforced with non-spliced FRP rebars were tested. The effects of bar size (10, 13, 16 and 19 mm) and splice length (from 0.72 to 1.58ld) on the bond strength were empirically evaluated. The test results indicate that a modification factor of 1.3 and 1.6 is relatively sufficient for the bond development length of glass FRP rebars in order to achieve an adequate tension lap splice length.

• Structural Engineering and Mechanics
• /
• v.32 no.3
• /
• pp.429-445
• /
• 2009

Thermal stability of quasi-isotropic composite and polymeric structures is considered one of the most important criteria in predicting life span of building structures. The outdoor applications of these structures have raised some legitimate concerns about their durability including moisture resistance and thermal stability. Exposure of such quasi-isotropic composite/polymeric structures to various and severe climatic conditions such as heat flux and frigid climate would change the material behavior and thermal viability and may lead to the degradation of material properties and building durability. This paper presents an analytical model for the generalized problem. This model accommodates the non-linearity and the non-homogeneity of the internal heat generated within the structure and the changes, modification to the material constants, and the structural size. The paper also investigates the effect of the incorporation of the temperature and/or material constant sensitive internal heat generation with four encountered climatic conditions on thermal stability of infinite cylindrical quasi-isotropic composite/polymeric structures. This can eventually result in the failure of such structures. Detailed critical analyses for four case studies which consider the population of the internal heat generation, cylindrical size, material constants, and four different climatic conditions are carried out. For each case of the proposed boundary conditions, the critical thermal stability parameter is determined. The results of this paper indicate that the thermal stability parameter is critically dependent on the cylinder size, material constants/selection, the convective heat transfer coefficient, subjected heat flux and other constants accrued from the structure environment.

• Steel and Composite Structures
• /
• v.24 no.2
• /
• pp.213-226
• /
• 2017

The behavior of building industry metal sheeting under shear forces has been extensively studied and equations have been developed to predict its shear stiffness. Building design engineers can make use of these equations to design a metal deck form bracing system. Bridge metal deck forms differ from building industry forms by both shape and connection detail. These two factors have implications for using these equations to predict the shear stiffness of deck form systems used in the bridge industry. The conventional eccentric connection of bridge metal deck forms reduces their shear stiffness dramatically. However, recent studies have shown that a simple modification to the connection detail can significantly increase the shear stiffness of bridge metal deck form panels. To the best of the author's knowledge currently there is not a design aid that can be used by bridge engineers to estimate the stiffness of bridge metal deck forms. Therefore, bridge engineers rely on previous test results to predict the stiffness of bridge metal deck forms in bracing applications. In an effort to provide a design aid for bridge design engineers to rely on bridge metal deck forms as a bracing source during construction, cantilever shear frame test results of bridge metal deck forms with and without edge stiffened panels have been compared with the SDI Diaphragm Design Manual and ECCS Diaphragm Stressed Skin Design Manual stiffness expressions used for building industry deck forms. The bridge metal deck form systems utilized in the tests consisted of sheets with thicknesses of 0.75 mm to 1.90 mm, heights of 50 mm to 75 mm and lengths of up to 2.7 m; which are representative of bridge metal deck forms frequently employed in steel bridge constructions. The results indicate that expressions provided in these manuals to predict the shear stiffness of building metal deck form panels can be used to estimate the shear stiffness of bridge metal deck form bracing systems with certain limitations. The SDI Diaphragm Design Manual expressions result in reasonable estimates for sheet thicknesses of 0.75 mm, 0.91 mm, and 1.21 mm and underestimate the shear stiffness of 1.52 and 1.90 mm thick bridge metal deck forms. Whereas, the ECCS Diaphragm Stressed Skin Design Manual expressions significantly underestimate the shear stiffness of bridge metal deck form systems for above mentioned deck thicknesses.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8437-8446
• /
• 2015

This study was designed to examine the effects of weight reduction programme(WRP) for obese primary school students on serum lipid level. This research used non-equivalent control group non-synchronized design that was conducted on two groups comprising 5th and 6th graders: an experimental group that received 12-week long WRP that combines diet, exercise and behavior modification therapy and the control group that did only rope-jumping. The collected data were analysed using ${\chi}^2$-test, t-test, ANOVA, Pairwise Comparsons by SPSS 18.0 Programme. It was proven that the WRP of this study was effective in lowering the total cholesterol(F=4.21, p=.049) and triglyceride(F=4.25, p=.049). WRP may be used as a basis for further studies that may be conducted after intervening the motivation level of the study subjects.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.3
• /
• pp.211-218
• /
• 2001

Objectives : To develop a Korean version of VSSS-82 for measuring the multi-dimensional satisfaction with community-based mental health services in psychiatric patients and to investigate both the reliability and validity of the Korean version. Methods : The VSSS-82 English version was translated and back-translated with some modification. Data from 68 psychosis patients using community-based mental health services in three Community Mental Health Centers (CMHCs) was collected through a personal interview survey regarding the satisfaction and suitability of service. Variability of satisfaction and internal consistency, discriminant validity, and concurrent validity of the VSSS-82 Korean version were evaluated. Results : A higher number of dissatisfied subjects and significant pairwise differences for the dimensions were found. The Crohnbach's alpha coefficient, a measure of internal consistency, ranged from 0.56(overall satisfaction) to 0.90(skills and behavior) and significant differences in satisfaction was found in patients by the self-rated suitability of service. Conclusions : The VSSS-82 Korean version is a reliable and valid instrument for measuring multi-dimensional satisfaction with community-based mental health service.